Question

In: Physics

a.) A particular patch of a vegetable oil (n=1.30) floating in water (n=1.33) is 530 nm...

a.) A particular patch of a vegetable oil (n=1.30) floating in water (n=1.33) is 530 nm thick. What is the longest wavelength which will undergo constructive interference on reflecting from the surface?

b). For a particular application, you want to apply an anti-reflective coating to glasses which will minimize reflection of green light with a wavelength of 550 nm. The index of refraction is ncoat= 1.30, and it will be applied on glass with index of refraction of nglass= 1.50. If you want the coating to be as thin as possible, how thick should be?

Solutions

Expert Solution


Related Solutions

An oil film (n = 1.45) floating on the surface of water has white light incident...
An oil film (n = 1.45) floating on the surface of water has white light incident on it at normal angle of incidence (i.e. perpendicular to the film). The film is 280 nm thick. For this problem, you will need to know that the visible spectrum consists of wavelengths of light from 400 to 700 nm. (a) What type of reflection (hard or soft) occurs at the air-oil interface, and what type of reflection (hard or soft) occurs at the...
Light with wavelength 530 nm in air (n = 1) passes through a soap bubble (n...
Light with wavelength 530 nm in air (n = 1) passes through a soap bubble (n = 1.33), where its wavelength becomes ≈ 400 nm. A What is the phase difference between a light wave reflected off the surface of the bubble and one that passes into it before being reflected? B The thickness of the bubble is 100 nm. Does this lead to constructive or destructive interference? C What would happen for a soap film covering a glass surface...
A thin oil slick (no = 1.50) floats on water(nw = 1.33). When a beam of...
A thin oil slick (no = 1.50) floats on water(nw = 1.33). When a beam of white light strikes this film at normal incidence from air, the only enhanced reflected colors are red (650 nm) and violent (390 nm). From this information, deduce the minimum thickness t of the oil slick.
3. An oil well contains water at the bottom, oil floating on it, and air above...
3. An oil well contains water at the bottom, oil floating on it, and air above the oil. You performed two time-of-arrival measurements with an instrument that measures the depth of the well using a light beam. The first reading on the instrument is t1= 1.33us and the second one is t2= 1.29 us taken after a certain amount of oil was pumped out. Calculate the change in the oil level considering the oil refractive index 1.46.
Light from air is incident on a puddle of water (n = 1.33) at the Brewster...
Light from air is incident on a puddle of water (n = 1.33) at the Brewster angle A) What is the angle of reflection from the water’s surface as measured from the normal? B) What is the angle of refraction into the water as measured from the normal? C) If the water sits on top of a layer of glycerin (n = 1.47) which sits on top of a sheet of crown glass (n = 1.52) what is the angle...
A soap film (n=1.33) is 772 nm thick. White light strikes the film at normal incidence....
A soap film (n=1.33) is 772 nm thick. White light strikes the film at normal incidence. What visible wavelengths will be constructively reflected if the film is surrounded by air on both sides? If there is more than one answer, separate them by a comma.
A sheet of glass (n=1.50) is coated with a 500 nm -thick layer of oil (n=1.42)....
A sheet of glass (n=1.50) is coated with a 500 nm -thick layer of oil (n=1.42). A. For what visible wavelengths of light do the reflected waves interfere constructively? The range of wavelength of visible light is from 380 nm to 750 nm. B. For what visible wavelengths of light do the reflected waves interfere destructively? C. What is the color of reflected light? D. What is the color of transmitted light?
A sheet of glass is coated with a 501-nm-thick layer of oil (n = 1.42). 1.For...
A sheet of glass is coated with a 501-nm-thick layer of oil (n = 1.42). 1.For what visible wavelengths of light do the reflected waves interfere constructively? 2.For what visible wavelengths of light do the reflected waves interfere destructively? 3.What is the color of reflected light? Red Yellow Orange Green-blue 4.What is the color of the most part of transmitted light? Yellowish green Blue Orange Red
Light is incident upon air-water interface (n=1.33). Calculate the Brewster and critical angles for both internal...
Light is incident upon air-water interface (n=1.33). Calculate the Brewster and critical angles for both internal and external reflections. In each case, distinguish between polarization modes. Calculate the reflectance and transmittance of water (as seen from air) for both TE and TM polarizations with the angles of incidence are 0, 45 and 90 degrees. Explain your findings. Calculate the reflectance and transmittance of air(as seen from water for both TE and TM polarizations with the angles of incidence are 0,...
A scientist notices that an oil slick floating on water when viewed from above has many different rainbow colors reflecting off the surface.
A scientist notices that an oil slick floating on water when viewed from above has many different rainbow colors reflecting off the surface. She aims a spectrometer at a particular spot and measures the wavelength to be 750 nm (in air). The index of refraction of water is 1.33.Part A: The index of refraction of the oil is 1.20. What is the minimum thickness of the oil slick at that spot? t= 313nmPart B: Suppose the oil had an index...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT