A sheet of glass is coated with a 501-nm-thick layer of oil (n = 1.42). 1.For...

A sheet of glass is coated with a 501-nm-thick layer of oil (n = 1.42).

1.For what visible wavelengths of light do the reflected waves interfere constructively?

2.For what visible wavelengths of light do the reflected waves interfere destructively?

3.What is the color of reflected light?

	Red
	Yellow
	Orange
	Green-blue

4.What is the color of the most part of transmitted light?

	Yellowish green
	Blue
	Orange
	Red

Expert Solution

genius_generous answered 7 months ago

A sheet of glass (n=1.50) is coated with a 500 nm -thick layer of oil (n=1.42)....

A sheet of glass (n=1.50) is coated with a 500 nm -thick layer of oil (n=1.42). A. For what visible wavelengths of light do the reflected waves interfere constructively? The range of wavelength of visible light is from 380 nm to 750 nm. B. For what visible wavelengths of light do the reflected waves interfere destructively? C. What is the color of reflected light? D. What is the color of transmitted light?

A sheet of glass (n=1.50) is coated with a 500nm -thick layer of oil (n=1.42). Part...

A sheet of glass (n=1.50) is coated with a 500nm -thick layer of oil (n=1.42). Part A For what visible wavelengths of light do the reflected waves interfere constructively? The range of wavelength of visible light is from 380 nm to 750 nm. Enter your answers numerically separated by commas. Part B For what visible wavelengths of light do the reflected waves interfere destructively? Enter your answers numerically separated by commas.

A 5.3-cm-thick layer of oil (n=1.46) is sandwiched between a 1.1-cm-thick sheet of glass and a...

A 5.3-cm-thick layer of oil (n=1.46) is sandwiched between a 1.1-cm-thick sheet of glass and a 2.0-cm-thick sheet of polystyrene plastic (n=1.59). How long (in ns) does it take light incident perpendicular to the glass to pass through this 8.4-cm-thick sandwich? A 2.0-cm-wide diffraction grating has 1000 slits. It is illuminated by light of wavelength 570 nm . What are the angles of the first two diffraction orders?

A cylindrical steel tank is coated with a thick layer of zinc on the inside. The...

A cylindrical steel tank is coated with a thick layer of zinc on the inside. The tank is 34 cm in diameter, 61 cm high and filled to the 27 cm level with aerated water. If the corrosion current is 5.9x10-5 A/cm2, how much zinc in grams per day is being corrode PLEASE DOUBLE CHECK THE ANSWER THIS IS MY FINAL ATTEMPT< THANKS A LOT

Thin Layer Chromatography utilizes a glass or metal plate coated with a thin layer of absorbent...

Thin Layer Chromatography utilizes a glass or metal plate coated with a thin layer of absorbent material such as silica gel. The sample is prepared similiarto paper chromatography and a solvent is used to elute the sample. 1. Which is the stationary phase? Plate Silica Gel Solvent 2. Which is the mobile phase? Plate Silica Gel Solvent 3. Which component is inert? Plate Silica Gel Solvent

A tank holds a 1.44-m thick layer of oil that floats on a 0.96-m thick layer...

A tank holds a 1.44-m thick layer of oil that floats on a 0.96-m thick layer of brine. Both liquids are clear and do not intermix. Point O is at the bottom of the tank, on a vertical axis. The indices of refraction of the oil and the brine are 1.40 and 1.52, respectively. A ray originating at O crosses the brine-oil interface at a point 0.5 m from the axis. The ray continues and emerges into the air above...

How thick (minimum) should the air layer be between two flat glass surfaces if the glass...

How thick (minimum) should the air layer be between two flat glass surfaces if the glass is to appear bright when 510 nm light is incident normally? nm What if the glass is to appear dark? nm

Thin layer chromatography in the organic chemistry typically uses a glass plate coated with silica gel,...

Thin layer chromatography in the organic chemistry typically uses a glass plate coated with silica gel, which serves as the stationary phase. The mobile phase in the experiment is an organic solvent or mixture of organic solvents. The mobile phase pulls the organic material(s) being analyzed up the plate by dissolving them in the solution. So, the more something dissolves in the mobile phase the further up the plate it moves. The mobile phase in this experiment will involve which...

A rhinestone is made of glass (n=1.5). To make it more reflective it is coated with...

A rhinestone is made of glass (n=1.5). To make it more reflective it is coated with a layer of SiO (n=2). Find the minimum thickness of the SiO coating to provide strong reflection for 570 nm light at normal incidence.

The aluminum oxide layer on aluminum nanoparticles is about 1.5 nm thick and is relatively independent...

The aluminum oxide layer on aluminum nanoparticles is about 1.5 nm thick and is relatively independent of diameter. Assuming a shperical nanoparticle, calculate the volume fraction of the particle that is aluminum oxide from a radius of 4-20 nm at 2-nm intervals. Plot the volume fraction of the material that is aluminum oxide. (That's 4-20nm, not 4.2 nm.)

Question