Calculate the theoretical flame temperature for CO gas burned at constant pressure with 100% excess air,...

Calculate the theoretical flame temperature for CO gas burned at constant pressure with 100% excess air, when the reactants enter at 100°C.

Please show work, do not copy the solution founded. show your solution! if you can not answer this question, then do not attempt to copy others' work.

Expert Solution

please give feedback.

Amanda K answered 6 months ago

Octane is burned completely with theoretical air in a steady-flow process at a constant pressure of...

Octane is burned completely with theoretical air in a steady-flow process at a constant pressure of 100 kPa. The products of combustion are cooled to 25 C. Calculate the number of kg of H2O which will condense per kg of fuel.

1 – Calculate the adiabatic flame temperature of propane combustion with 50% excess air. 2– Use...

1 – Calculate the adiabatic flame temperature of propane combustion with 50% excess air. 2– Use an online adiabatic flame calculator to calculate the adiabatic flame temperature of propane with air in increments of 0.1 equivalence ratio from 0.5 to 1.2. Plot your results and determine the point that the flame has the maximum T. Compare your results with that of Problem 1.

the adiabatic flame temperature (theoretical maximum temperature) of black coal in air is over 2000oC. If...

the adiabatic flame temperature (theoretical maximum temperature) of black coal in air is over 2000oC. If the ambient temperature is 20oC then the theoretical maximum efficiency of a coal fired power station is approximately 87%. Why then is the efficiency of even the best coal fired power stations less than 50%.

100 mol n-Hexane (C6H14) is burned with excess air. An analysis of the product gas yields...

100 mol n-Hexane (C6H14) is burned with excess air. An analysis of the product gas yields the following dry-basis molar composition: 6.9% CO2, 2.1% CO, 0.265% C6H14 (+ O2 and N2). The stack gas emerges at 760 mm Hg. Calculate the percentage conversion of hexane, the percentage excess air fed to the burner, and the dew point of the stack gas, taking water to be the only condensable species.

For ethanol liquid with 50% excess of air. Determine adiabatic flame temperature

Determine the adiabatic flame temperature when liquid octane, C8H18 at 25C is burned with 300% theoretical...

Determine the adiabatic flame temperature when liquid octane, C8H18 at 25C is burned with 300% theoretical air at 25C in a steady flow process.

Methane gas (CH4) is burned in a combustor with a given percentage of excess air. The...

Methane gas (CH4) is burned in a combustor with a given percentage of excess air. The pressure and temperature of both the air and fuel are 101 kPa and 298 K respectively. Assume that the mole fractions are 79% nitrogen and 21 % oxygen for air (use M=28.97 kg/kmol and R=0.287 kJ/kg-K) and that water is a vapor in the exhaust. Given the values below, determine the following: --Given Values-- m_fuel (kg) = 100 Excess Air = 25% a) Determine...

Find the adiabatic flame temperature for complete combustion with 130% theoretical air for pentane. (The pentane...

Find the adiabatic flame temperature for complete combustion with 130% theoretical air for pentane. (The pentane and air enter at standard reference conditions.)

When a hydrocarbon burns with 300% of theoretical air, is the adiabatic flame temperature higher than,...

When a hydrocarbon burns with 300% of theoretical air, is the adiabatic flame temperature higher than, lower than, or equal to the adiabatic flame temperature when it burns with 100% of theoretical air? Why? Note: You must correctly explain your reasoning to receive credit for this problem.

Air is at 100 kPa and 150°C, and undergoes a constant pressure process. The final temperature...

Air is at 100 kPa and 150°C, and undergoes a constant pressure process. The final temperature of the air is 1000°C. a) Compute the specific volume ratio. b) Compute the boundary work (kJ/kg) c) Compute the change in specific internal energy by: 1. Using the tables. 2. Integrating the polynomial (cp) 3. Assuming constant specific heat. d) Repeat c for specific enthalpy e) Compute the heat

Question