Question

In: Other

from the DePrestier Chart at 50 psi , the temperature in deg. F pure propane boils...

from the DePrestier Chart at 50 psi , the temperature in deg. F pure propane boils at is

Solutions

Expert Solution

To calculate boiling point of pure propane at 50 psi, we have to use K=1

Since

For pure propane vapor pressure = total pressure.

PAo= Vapor pressure

P =Total pressure

So in deprister chart first we make point A at 50 psi and then make a point B at K=1 in propane. So temperature at point C gives us boiling point of pure Propane at 50 Psi

Answer Tboil = 15 oF


Related Solutions

A propane tank with 75 gallons of liquid propane is at 50 F in a sealed...
A propane tank with 75 gallons of liquid propane is at 50 F in a sealed tank. The tank develops a significant leak and propane escapes and vaporizes in a short period of time. To solve this problem you must use the propane tables not the common liquid properties. What is the temperature near the hole in the propane tank due to the escaping propane in Fahrenheit to three significant digits? .   Include a minus sign if appropriate. How many...
1 – Calculate the adiabatic flame temperature of propane combustion with 50% excess air. 2– Use...
1 – Calculate the adiabatic flame temperature of propane combustion with 50% excess air. 2– Use an online adiabatic flame calculator to calculate the adiabatic flame temperature of propane with air in increments of 0.1 equivalence ratio from 0.5 to 1.2. Plot your results and determine the point that the flame has the maximum T. Compare your results with that of Problem 1.
Five lbs of propane is contained in a closed, rigid tank initially at 80 lbf/in.2, 50°F....
Five lbs of propane is contained in a closed, rigid tank initially at 80 lbf/in.2, 50°F. Heat transfer occurs until the final temperature in the tank is 0°F. Kinetic and potential energy effects are negligible. Determine the amount of energy transfer by heat, in Btu.
R22 is compressed adiabatically and reversibly from saturated vapor at -20 deg F to 200 psia....
R22 is compressed adiabatically and reversibly from saturated vapor at -20 deg F to 200 psia. Find the final temperature and the specific work done.
A geyser is a hot spring in which water occasionally boils, sending a tall column of water and steam into the air. A temperature sensor is used to monitor the temperature near the geyser. The data from the sensor is sent to a microprocessor.
A geyser is a hot spring in which water occasionally boils, sending a tall column of water and steam into the air. A temperature sensor is used to monitor the temperature near the geyser. The data from the sensor is sent to a microprocessor Explain why the data from the sensor has to be changed before it is read by the microprocessor. Describe three advantages of using sensors and microprocessors to monitor the temperature in geysers rather than using manual...
An ice cube whose mass is 50 g is taken from a freezer at a temperature...
An ice cube whose mass is 50 g is taken from a freezer at a temperature of -10C and then dropped into a cup of water at 0C. If no heat is gained or lost from the outside, how much water will freeze onto the cup?
How much ice is needed to make ice tea at a temperature of 50 C from...
How much ice is needed to make ice tea at a temperature of 50 C from 140 grams of hot tea at 650 C contained in a glass container of 50 gm with specific heat equal to 0.2 cal/gm0 C. Treat the tea as colored water.
1a) Superheated steam is expanded isentropically from 1000 psia and a temperature of 900 F to...
1a) Superheated steam is expanded isentropically from 1000 psia and a temperature of 900 F to saturated vapor. What is the change in specific enthalpy in BTU/lbm? 1b) Steam expands isentropically in a turbine from 500 psia and 1000 F to 14.7 psia. What is the difference in specific enthalpy, in BTU/lbm, between the initial and final conditions.?
Poplar wood contains 50% cellulose. Pure cellulose extracted from wood can enzymatically be converted to glucose...
Poplar wood contains 50% cellulose. Pure cellulose extracted from wood can enzymatically be converted to glucose C6H12O6 with 90% efficiency. Write down a balanced chemical reaction for the conversion of glucose to ethanol (CH3CH2 OH). Use this equation to calculate the theoretical yield of ethanol from one-ton of poplar wood. Calculate the actual yield of ethanol from one-ton of poplar wood if the fermentation efficiency (glucose to ethanol) is 95%. Determine the gasoline equivalent of ethanol in part C above.
How many tons of refrigeration is required to cool 50 GPM of liquid from 110 F...
How many tons of refrigeration is required to cool 50 GPM of liquid from 110 F to 50 F ? The liquid has a specific heat of 1.40 BTU/lb F and density of 9.2 lb/gal. Note: 1 Ton refrigeration = 12,000 BTU/hr
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT