Question

In: Physics

Fire hoses used in major structural fires have an inside diameter of 6.40 cm. Suppose such...

Fire hoses used in major structural fires have an inside diameter of 6.40 cm.
Suppose such a hose carries an inital flow of 40.0 L/s at ground level, starting at
a gauge pressure of 1.62 x 106 N/m2. The hose rises up 10.0 m along a ladder
to a nozzle having an inside diamter of 3.00 cm. (Hint use Bernoulliʻs equation)

1)Draw a diagram of what is happening?

2)What is the speed at v1 and v2 in m/s?

3)What is the pressure in the nozzle at p2?

Solutions

Expert Solution

I hope you understood the problem and got your answers, If yes rate me!! or else comment for a better solutions.

genius_generous answered 2 years ago
Next > < Previous

Related Solutions

Fire hoses used in major structure fires have inside diameters of 2.500 in (1 in =...
Fire hoses used in major structure fires have inside diameters of 2.500 in (1 in = 2.54 cm). The nozzle of the fire hose have an inside diameter of 1.200 in. When firefighters are fighting a fire 2020.007 cm above the ground, the pressure in the nozzle is less than at ground level. When measured, the gauge pressure in the nozzle is 0.000 Pa. (a) How are the firefighters able to fight a fire with zero water pressure? Explain your...
Fire hoses used in major structure fires have inside diameters of 2.500 in (1 in =...
Fire hoses used in major structure fires have inside diameters of 2.500 in (1 in = 2.54 cm). The nozzle of the fire hose have an inside diameter of 1.200 in. When firefighters are fighting a fire 2020.007 cm above the ground, the pressure in the nozzle is less than at ground level. When measured, the gauge pressure in the nozzle is 0.000 Pa. (a) How are the firefighters able to fight a fire with zero water pressure? Explain your...
A fire hose has an inside diameter of 6.40 cm. Suppose such a hose carries a...
A fire hose has an inside diameter of 6.40 cm. Suppose such a hose carries a flow of 40.0 L/s starting at a gauge pressure of 1.62×106N/m2 . The hose goes 10.0 m up a ladder to a nozzle having an inside diameter of 3.00 cm. Calculate the Reynolds numbers for flow in the fire hose and nozzle to show that the flow in each must be turbulent.
. A steam main (outside diameter of 16.8 cm and inside diameter of 15.4 cm) is...
. A steam main (outside diameter of 16.8 cm and inside diameter of 15.4 cm) is covered with 5-cm of high temperature insulation (k = 0.095 W/m. K) and 3.8 cm of lower temperature insulation (k = 0.07W/m. K). Calculate the heat loss from 150 m pipe assuming that inner and outer surface temperatures of the insulation are 450 and 30 °C, respectively. Also determine the temperature at the interface between two layers of insulation (10 points).
A fire chief wants to relate the amount of fire damage in major residential fires to...
A fire chief wants to relate the amount of fire damage in major residential fires to the distance between the residence and the nearest fire station in order to get approval to add a fire station. The chief performs a study using a sample of fifteen recent fires in the town. The following table shows the result of the study. Distance in miles (x) Damage in thousands of dollars(y) 3.4 26.2 1.8 17.8 4.6 31.3 2.3 23.1 3.1 27.5 5.5...
A fire insurance company wants to estimate the amount of fire damage in major residential fires...
A fire insurance company wants to estimate the amount of fire damage in major residential fires based on distance between the residence and the nearest fire station. The study is to be conducted in a large suburb of a major city, a sample of 16 recent fires in this suburb is selected. –Explanatory Variable (x): Distance –Response Variable (y): Damage Give a 95% Confidence Interval for slope. (  ,  )
To contain a violent mob, the riot squad approaches with fire hoses. Suppose that the rate of flow of water through a fire
To contain a violent mob, the riot squad approaches with fire hoses. Suppose that the rate of flow of water through a fire hose is 24 kg/s, and the stream of water from the hose moves at 17 m/s. What force is exerted by such a stream on a person in the crowd? Assume that the water comes to a dead stop against the person's chest.  
A bearing used in an automotive application is required to have a nominal inside diameter of...
A bearing used in an automotive application is required to have a nominal inside diameter of 1.5 inches. A random sample of 25 bearings is selected and the average inside diameter of these bearings is 1.4975 inches. Bearing diameter is known to be normally distributed with standard deviation 1inch. (a) Test the hypotheses 1.5 versus 1.5 using 0.01 The true mean hole diameter Entry field with correct answer significantly different from 1.5 in. at alpha equals 0.01. (b) What is...
a- Water enters a house through a pipe with inside diameter of 3.0 cm at an...
a- Water enters a house through a pipe with inside diameter of 3.0 cm at an absolute pressure of 5.0 X 105 Pa. A 1.5 cm diameter pipe leads to the second-floor bathroom 6.0 m above. When the flow speed at the inlet pipe is 2.0 m/s find: - Flow speed (velocity) of the water in the bathroom - Pressure water in the bathroom? - Calculate the volume flow rate in the bathroom.
The inside diameter of a piston ring is normally distributed with a mean of 10 cm...
The inside diameter of a piston ring is normally distributed with a mean of 10 cm and a standard deviation of 0.04 cm. What is the probability that a piston ring will have an inside diameter less than 10.075 cm? What is the probability that a piston ring will have an inside diameter between 9.94 and 10.045 cm? What proportion of rings will have inside diameters exceeding 10.066 cm? Suppose that five piston rings are randomly selected. What is the...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT