Question

In: Mechanical Engineering

To start a three-phase motor, three switches (A, B and C) are required in such a...

To start a three-phase motor, three switches (A, B and C) are required in such a way that its operation occurs only under the following conditions: • When closed only B • When closed only C • When A and B are simultaneously closed and C is not closed • When A and C are simultaneously closed and B is not closed

Solutions

Expert Solution

Three Phase Power

Three-phase motors are motors that are designed to run on the three-phase alternating current (AC) power used in several industrial applications. AC electricity changes direction from negative to positive and back many times a second. The AC you get in your house, for example, goes from negative to positive and back again 60 times in 1 second. AC changes power in a smooth continuous wave called a sine wave. Three-phase AC has three sources of AC power, all out of phase with each other. That means that no two AC waves are ever at the same point at the same time.

To start a three-phase motor, three switches (A, B and C) are required in such a way that its operation occurs only under the following conditions:

• When closed only B

• When closed only C

• When A and B are simultaneously closed and C is not closed

• When A and C are simultaneously closed and B is not closed

so what do you want me to do for you now?


Related Solutions

describe how pressure switches are connected to start and stop a small motor and a large...
describe how pressure switches are connected to start and stop a small motor and a large motors
What is the difference between a capacitor- start split-phase motor and a permanent-split capacitor motor? Briefly...
What is the difference between a capacitor- start split-phase motor and a permanent-split capacitor motor? Briefly explain some of the differences between them including advantage and disadvantages of each.
Define: (a)Juvenile phase (b)Reproductive phase (c)Senescent phase.
Define: (a)Juvenile phase (b)Reproductive phase (c)Senescent phase. with details Explaination
Electric Machinery What are the advantages of using three-phase induction motor as compared to single phase...
Electric Machinery What are the advantages of using three-phase induction motor as compared to single phase induction motors? please write it with long details and with clear written
A three phase 30 hp 460 volt 60 hz, 1770 rpm design B induction motor with...
A three phase 30 hp 460 volt 60 hz, 1770 rpm design B induction motor with class F insulation and service factor of 1.0 is operating at rated shaft load in a 40 degree C environment and has an expected 20 yr life. A maintenance check shows line to line voltages to be 449.2 V, 431.3 V and 462.4 volts. The percent unbalanced voltage for this motor is: the expected temperature rise equals? The expected insulation life equals? the rerating...
There are A, B and C, three plastic balls, A and B, B and C, C...
There are A, B and C, three plastic balls, A and B, B and C, C and A are attracted to each other, if A is positive: Group of answer choices 1. Both B and C are negatively charged. 2. One of the B balls and the C balls is going to be negatively charged and the other one is not charged 3. B ball, C ball has no charge 4. B ball is negatively charged, C ball is positively...
A three-phase motor is delta connected to a 415 V, 60 Hz line. If the line...
A three-phase motor is delta connected to a 415 V, 60 Hz line. If the line current is 25 A and the motor power factor is 0.75, how much power is consumed by the motor (a) Determine the size of the bank of three capacitors to improve the power factor of the motor to 0.95. The capacitors are delta connected. (b) If two of the motors work together, what is the size of capacitors to correct the power factor to...
The test results for the approximate equivalent circuit of a three-phase induction motor are shown below....
The test results for the approximate equivalent circuit of a three-phase induction motor are shown below. No-load test: equivalent applied voltage 120 V, input current 5 A, equivalent input 480 W Restraint test: Applicable voltage 20V, input current 40A, equivalent input 480W Determine the equivalent circuit constants of Rc, Xm, Rs + Rr, and Xs + Xr when friction and wind losses are ignored. Answer - 30Ω, 40Ω, 0.3Ω, 0.4Ω
Simulate a single phase to three phase converter. Show a) the circuit b) values used for...
Simulate a single phase to three phase converter. Show a) the circuit b) values used for each component c) input and output waveform d) explain how the circuit works
The single-phase equivalent-circuit parameters for a three-phase induction motor in ohms-per-phase are R1=0.17 R2=0.24 X1=1.05 X2=0.87...
The single-phase equivalent-circuit parameters for a three-phase induction motor in ohms-per-phase are R1=0.17 R2=0.24 X1=1.05 X2=0.87 Xm=82.1 Rc=435 For a slip of 5 percent, and a terminal voltage of 460 V, line to line, calculate: A) Calculate the motor phase current and input real and reactive power. B) Calculate the mechanical output power and the power dissipated in the rotor. You might assume that the motor friction and windage losses are 270W C) Calculate the motor core loss and the...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT