- Air with (μair = 2.27*10-5 pa.s, T = 394.3 K, M.wt of air = 28.97),...

- Air with (μair = 2.27*10-5 pa.s, T = 394.3 K, M.wt of air = 28.97), flows through a packed bed of cylinders having a diameter of 0.03 m, and length the same as the diameter. The bed void fraction is 0.45 and the length of the packed bed is 4 m. The air enters the bed at 1.5 atm abs at the rate of 3.5 kg/m .s based on the empty cross section of the bed. Calculate the pressure drop of air in the bed.

Expert Solution

Amanda K answered 6 months ago

1. A student mixes 3.00 mL of 2.27 × 10−5 M crystal violet solution with 3.00...

1. A student mixes 3.00 mL of 2.27 × 10−5 M crystal violet solution with 3.00 mL 0.100 M sodium hydroxide both at 24.5 °C and collects the following data: Time(Min) Absorbance 1.49 0.206 4.17 0.157 6.22 0.131 8.15 0.108 10.10 0.093 13.00 0.072 14.02 0.066 16.18 0.055 19.00 0.044 (a) Describe the graphical analysis steps the studentshould perform in order to determine the (i) Order of the reaction with respect to crystal violet (ii) Value of the rate constant,...

Air enters a turbine operating at steady state at 10 bar, 1200 K and expands to...

Air enters a turbine operating at steady state at 10 bar, 1200 K and expands to 0.8 bar. The turbine is well insulated, and kinetic and potential energy effects can be neglected. Assuming ideal gas behavior for the air, what is the maximum theoretical work that could be developed by the turbine in kJ per kg of air flow?

A 10 L adiabatic container contains 0.1 mol of air, at a temperature of 250 K....

A 10 L adiabatic container contains 0.1 mol of air, at a temperature of 250 K. It is closed by a stopcock. Ambient air is at 300 K at a pressure of 1 bar. The stopcock is opened for a moment and a certain amount of air penetrates into the container. After thermal equilibrium is reached inside the container, the gas temperature is measured to be 350 K. 1) Assuming that the air behaves as an ideal gas, find the...

air behaves as an ideal gas with R = 0.287 k J k g K. A...

air behaves as an ideal gas with R = 0.287 k J k g K. A compressor operates at steady state and takes in air from ambient 0 kPa, gage and 300 K. The outlet pressure is 60 kPa, gage and 300 K. Determine: the mass flow rate if the inlet area is 10 cm2 and the inlet pressure is -3 kPa, gage. the minimum outlet temperature that is possible for this compressor. the isentropic efficiency of the compressor, assuming...

Let K = { s+t * 2^(1/2), such that s, t are Rational}. Show that K...

Let K = { s+t * 2^(1/2), such that s, t are Rational}. Show that K is a Field

The solubility product of Hg2Cl2 at T=298 K is 1.2 x 10-18. What is the molar...

The solubility product of Hg2Cl2 at T=298 K is 1.2 x 10-18. What is the molar solubility of this salt? 2.0 x 10-9 mol L-1 6.9 x 10-7 mol L-1 There is not enough information to answer this question

A 200 g mass hangs from a massless spring (k = 10 N/m). At t =...

A 200 g mass hangs from a massless spring (k = 10 N/m). At t = 0.0 s, the mass is 20 cm below the equilibrium point and moving upward with a speed of 100 cm/s. What is the a. oscillation frequency? b. distance from equilibrium when the speed is 50 cm/s? c. distance from equilibrium at t = 1.0 s?

Determine the specific volume (m3/kg) of air at T = 159.6 K and P = 37.5 bar using the generalized compressibility chart.

The Company: T&K Solutions T&K Solutions is a boutique accounting firm offering taxation, bookkeeping and advisory...

The Company: T&K Solutions T&K Solutions is a boutique accounting firm offering taxation, bookkeeping and advisory services to a broad range of clients across the Brisbane and Gold Coast area. The firm was established by Terry Thompson in 1998 as a small suburban accounting firm where he offered taxation and bookkeeping services to local businesses. Terry soon developed a reputation for his expertise in taxation and his client base grew considerably. A few years ago Terry recognised a growing need...

Air is cooled from 300 K to 273 K as it flows steadily through a duct....

Air is cooled from 300 K to 273 K as it flows steadily through a duct. Frictional dissipation may be neglected. Cooling is achieved by removing heat via a heat pump. The work requirement is 1.15 times that of a reversible heat pump operating between 263 and 310 K. For each mole of air flowing through the duct, calculate: Air can be assumed an ideal gas with a constant heat capacity cP of 3.50R. The temperature of the surroundings is...

Question

- Air with (μair = 2.27*10-5 pa.s, T = 394.3 K, M.wt of air = 28.97),...

Solutions

Expert Solution

Related Solutions