Question

In: Economics

Best Electric whishes to construct a new coal-fired plant in the southwest corner of Michigan. Best...

  1. Best Electric whishes to construct a new coal-fired plant in the southwest corner of Michigan. Best plans to use the best available technology for the scrubbers on the plant to reduce emissions. Should Best be able to obtain a permit from the EPA to build and operate the proposed new electric plant? Please briefly discuss the issues Best faces for the proposed plant.

Solutions

Expert Solution

Generally, When any plants such as coal,oil or natural gas were likely being constructed in any place. We must have an proper idea about the environmental conditions in that area.

Here as Best Electric wishes to built the coal-fired plant in the corner area of michigan.so,first of all The best company must have permission from the government of that country for the establishing of that plant.

TECHNOLOGIES NEEDED TO REDUCE EMISSION

-> To reduce the emissions from the plant we can use BAGHOUSE FILTERS, ELECTROSTATIC PRECIPITATORS and also SCRUBBERS.This technlogies help to reduce the PM emissions from the power plant.

-> To reduce the air pollution caused by the coal fired plant in futrue, it is better to use CIRCULATING FLUIDISED-BED technology which enables the output as environment friendly.

It is really good, if you have the permission from the ENVIRONMENTAL PROTECTION AGENCY (EPA) . It is also mandatory to have environment clearence certificate for the construction of the new power plant.if you have that certificate with you then no person or any local authorites will question you in future and also your establishment will move in a smooth way.

Also there are several acts made by the government such as Clean Air Act which is a law to reduce the air pollution. Under this act, it is very clear that any plants that are going to be established must apply for the permit from their state. And also the newly constructed coal fired plant should meet the standards that were made according to the norms of the country.


Related Solutions

1.       Consumers Energy Inc (CSI) operates a coal fired power plant in Michigan, which has to...
1.       Consumers Energy Inc (CSI) operates a coal fired power plant in Michigan, which has to come in compliance with nitrogen oxide (NOx) standards by reducing its NOx emissions to 100 tons per year from its current level of 250 tons/year. It is considering the following options to come in compliance. Install Selective Catalytic Reactor (SCR) on its boiler. SCR reduces NOx emissions by absorbing NOx in exhaust flue gases. SCR requires a capital investment of $800,000 in year zero...
Consider a coal-fired steam power plant that produces 175 MW of electric power. The power plant...
Consider a coal-fired steam power plant that produces 175 MW of electric power. The power plant operates on a simple ideal Rankine cycle with turbine inlet conditions of 7 MPa and 550°C and a condenser pressure of 15 kPa. The coal has a heating value (energy released when the fuel is burned) of 29,300 kJ/kg. Assuming that 75% of this energy is transferred to the steam in the boiler and that the pump has an efficiency of 80% and the...
A typical coal-fired electric generating plant will burn about 3 metric tons of coal per hour....
A typical coal-fired electric generating plant will burn about 3 metric tons of coal per hour. Most of the coal burned in the United States contains 1 to 4 % by weight sulfur in the form of pyrite, which is oxidized as the coal burns: 4FeS2(s) + 11 O2(g) = 2 Fe2O3(s) + 8 SO2(g) Once in the atmosphere, the SO2 is oxidized to SO3, which then reacts with water in the atmosphere to form sulfuric acid: SO3(g) + H2O(l)...
At a coal-fired power plant, assume that lignite coal is being burned as shown in the...
At a coal-fired power plant, assume that lignite coal is being burned as shown in the following stoichiometric combustion reaction equation, which assumes that the nitrogen in the lignite and in the air is all converted to NO and that combustion is complete: CH0.96O0.18N0.016S0.012 + x (O2 + 3.78 N2) → CO2 + 0.48 H2O + 0.016 NO + 0.012 SO2 + 3.78x N2 (a) What is the value of the coefficient, x? (b) To ensure complete combustion, air must...
If a coal-fired power plant burns 2 kg of coal to produce electricity, and the electricity...
If a coal-fired power plant burns 2 kg of coal to produce electricity, and the electricity is used to power an elevator motor that is 60% efficient, how high can the elevator and passengers be lifted up if their total mess is 1500 kg? and then How many human workers using muscle power('energy servants") would be needed to lift the elevator up to the same height, if they had one minute to do so? Assuming that one energy servant is...
A coal-fired power plant proposes to burn 3% sulfur coal with a heating value of 11,000...
A coal-fired power plant proposes to burn 3% sulfur coal with a heating value of 11,000 Btu/lb. If the plant is to meet the standard of performance given by EPA New Source Performance Standards (NSPS), what percent cleanup is required for SO2? What percent sulfur could the coal contain if the standards are to be met with no clean-up devices?
A coal fired plant burns 1000 metric tons of coal per day at 2% sulfur. (...
A coal fired plant burns 1000 metric tons of coal per day at 2% sulfur. ( 1 metric ton = 1000 kg). a. What is the SO2 emission rate? b. What is the SO2 concentration 1.0 km downwind (x = 1000m)? c. 0.1 km off centerline in y direction (y = 100m)? and d. At ground level (z = 0) wind speed is 4 m/s and it’s a cloudy day? Stability =D; σy = 68m; σz = 37m
A 600 MW pulverized coal-fired power plant of 40% efficiency uses coal with an ash content...
A 600 MW pulverized coal-fired power plant of 40% efficiency uses coal with an ash content of 15% and a heating value of 26,700 kJ/kg. Assume 35% of the ash content goes up the stack as particulate matter in the flue gas. The PM emission is controlled by an ESP which has the following efficiencies and weight distribution in the given size ranges. Find the fly ash emitted in g/s.
A coal-fired power plant produces power  with costs . Each unit of power earns the plant ....
A coal-fired power plant produces power  with costs . Each unit of power earns the plant . Burning coal releases particulate matter (PM2.5), a pollutant that is known to cause heart disease, lung disease, and birth defects. The coal plant borders a wildlife sanctuary which sells tourism visits  for a price $30. However, the sanctuary's animals are getting sick due to the negative externality of PM2.5, such that the costs to the sanctuary are . The local government decides to tax the...
Assume you have a coal fired plant that produces 300 MW. The plant is 30% efficient....
Assume you have a coal fired plant that produces 300 MW. The plant is 30% efficient. There is 0.2 lbs. of sulfur produced per BTU. There is 5% residual ash created. Assume you live 4km downstream to the plant. Its is a cloudy summer night with wind of 2.5 m/s. The effective stack height is 100m What is the feed rate of coal to the plant (lbs. per hour)? How much sulfur is produced per hour? What is the concentration...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT