A steel ball of mass 0.770 kg is fastened to a cord that is 38.0 cm...

A steel ball of mass 0.770 kg is fastened to a cord that is 38.0 cm long and fixed at the far end. The ball is then released when the cord is horizontal, as shown in the figure. At the bottom of its path, the ball strikes a 3.20 kg steel block initially at rest on a frictionless surface. The collision is elastic. Find (a) the speed of the ball and (b) the speed of the block, both just after the collision.

Expert Solution

as u can see, block remains at rest and ball bounds back. This is because mass of block is much more greater than ball

genius_generous answered 7 months ago

A steel ball of mass 0.920 kg is fastened to a cord that is 34.0 cm...

A steel ball of mass 0.920 kg is fastened to a cord that is 34.0 cm long and fixed at the far end. The ball is then released when the cord is horizontal, as shown in the figure. At the bottom of its path, the ball strikes a 2.10 kg steel block initially at rest on a frictionless surface. The collision is elastic. Find (a) the speed of the ball and (b) the speed of the block, both just after...

A steel ball of mass 0.514kg is fastened to a cord 67.8cm long and is released...

A steel ball of mass 0.514kg is fastened to a cord 67.8cm long and is released when the cord is horizontal. At the bottom of its path, the ball strikes a 2.63kg steel block initially at rest on a frictionless surface. The collision is elastic. Find (a) the speed of the ball and (b) the speed of the block, both just after the collision. (c) Suppose instead that one-half the kinetic energy is converted to internal energy as a result...

A mass of 11.0 kg , fastened to the end of an aluminum wire with an...

A mass of 11.0 kg , fastened to the end of an aluminum wire with an unstretched length of 0.47 m , is whirled in a vertical circle with a constant angular speed of 118 rev/min . The cross-sectional area of the wire is 2.0×10−2 cm2 . Part A: Calculate the elongation of the wire when the mass is at the lowest point of the path. Express your answer using two significant figures. Part B: Calculate the elongation of the...

A steel ball with a mass of 0.600 kg is dropped from an initial height of...

A steel ball with a mass of 0.600 kg is dropped from an initial height of 2.80 m onto a metal plate. The steel ball bounces multiple times and on each bounce it returns to 75% of its previous maximum height. A)What is the initial mechanical energy of the ball-Earth system, just after the ball is released from its initial height? Use the surface of the steel plate as the y = 0 reference point for the gravitational potential energy....

A solid bowling ball with a radius of 10.9 cm and a mass of 7.3 kg...

A solid bowling ball with a radius of 10.9 cm and a mass of 7.3 kg rolls along a bowling alley at a linear speed of 2.6 m/s. What is its translational kinetic energy? What is its rotational kinetic energy

In the figure, two particles, each with mass m = 0.77 kg, are fastened to each...

In the figure, two particles, each with mass m = 0.77 kg, are fastened to each other, and to a rotation axis at O, by two thin rods, each with length d = 5.2 cm and mass M = 1.0 kg. The combination rotates around the rotation axis with angular speed ? = 0.32 rad/s. Measured about O, what is the combination's (a) rotational inertia and (b) kinetic energy?

A crane drops a 0.30 kg steel ball onto a steel plate.

A crane drops a 0.30 kg steel ball onto a steel plate. The ball's speeds just before impact and after are 4.5 m/s and 4.2 m/s, respectively. If the ball is in contact with the plate for 0.030 s, what is the magnitude of the average force that the ball exerts on the plate during impact?

A counterweight of mass ? = 4.00 kg is attached to a light cord that is...

A counterweight of mass ? = 4.00 kg is attached to a light cord that is wound around a pulley as shown in the figure. The pulley is a thin hoop of radius ? = 8.00 cm and mass ? = 2.00 kg. The spokes have negligible mass. (Determine your answers first in terms of these symbols and then numerically evaluate.) What is the net external torque acting on the system of wheel-cord- counterweight? Hint: Use the formula of...

A ball of mass m1 =5.2 kg and a block of mass m2 =2.0 kg are...

A ball of mass m1 =5.2 kg and a block of mass m2 =2.0 kg are connected with a lightweight string over a pulley with moment of inertia I and radius R=0.25m. The coefficient of kinetic friction between the table top and the block of mass m2 is μk = 0.4. If the magnitude of the acceleration is a=2.7 m/s2. torque_rotational a)What are the tensions T1 and T2 in the string. T1= N T2= N b)Calculate the moment of inertia...

Ball Collision. A ball with a mass of 0.600 kg is initially at rest. It is...

Ball Collision. A ball with a mass of 0.600 kg is initially at rest. It is struck by a second ball having a mass of 0.400 kg, initially moving with a velocity of 0.250 m/s toward the right along the x-axis. After the collision, the 0.400 kg ball has a velocity of 0.200 m/s at an angle of 36.9° above the x axis in the first quadrant. Both balls move on a frictionless, horizontal surface. Find the magnitude of the...

Question