A rectangular channel carries a flow at a velocity of 2.1 m/sec and at a depth...

A rectangular channel carries a flow at a velocity of 2.1 m/sec and at a depth of 2.1m. The tail end gate of the channel is suddenly closed. Find the height and speed of the surge. What would be the values of these quantities if the gate is partially closed to release half of the flow?

Expert Solution

Ally Wells answered 6 months ago

A 5 m wide rectangular channel carries a flow of 20 m3/s. The slope of the...

A 5 m wide rectangular channel carries a flow of 20 m3/s. The slope of the channel is 0.005 and the Manning’s n is 0.03. The flow encounters a 0.5 m step up that is 0.1 m long. The depths far upstream and downstream are normal. Classify this channel Qualitatively sketch this scenario, label gradually varied flow curves and provide appropriate depths. Draw this scenario on an E-Y cycle graph, and label all depth changes.

Calculate the flow depth in a rectangular riveted steel open channel with a width of 6.1...

Calculate the flow depth in a rectangular riveted steel open channel with a width of 6.1 m and a slope of 0.0001, since the water flow is 6.8 m3/s.

A rectangular channel of bottom width B = 7 m carries an average discharge of Q...

A rectangular channel of bottom width B = 7 m carries an average discharge of Q = 8 m3/s. There are two successive long reaches. The first reach has s01=0.015 and n1=0.010; and the second reach has s02=0.0017 and n2=0.021. Classify the slopes.

A rectangular channel with a base width of 3 m carries a discharge of 6 m3/s...

A rectangular channel with a base width of 3 m carries a discharge of 6 m3/s at a depth of 1.1 m. At downstream, there is a gradual rising of a channel bed of 0.1 m. a) Plot the specific energy curve from y = 0.4 m to 1.3 m in a step 0.1 m and from the curve, determine the depth of flow at the downstream section. Label the graph and show your working answers clearly on the graph....

A flow of 2.0 m3 /s is carried in a rectangular channel of 1.8 m width...

A flow of 2.0 m3 /s is carried in a rectangular channel of 1.8 m width at a depth of 1.0 m (section 1). There is an upward step of 0.18 m together with a contraction where b reduces to 1.4 m (section 2). a) Draw the side view and top view of the channel described above. b) Calculate the specific energy at section 1 and plot the specific energy curve. Show y1, E1, V1 2 /2g on the curve....

The sequent depth, ys of a hydraulic jump in a rectangular channel is related to the...

The sequent depth, ys of a hydraulic jump in a rectangular channel is related to the initial yi, the discharge per unit length, q, gravity acceleration, g and density r. Express the ratio ys/yi in term of non-dimensional group and compare with the equation developed from momentum principles as shown below: ?! #

A rectangular channel 10m wide carries a discharge of 40m3 /s. If at a section in...

A rectangular channel 10m wide carries a discharge of 40m3 /s. If at a section in this channel the depth is 1.5m, how far (upstream or downstream) from this section will the depth be 2.0m.Take So=0.00009and manning’s constant n=0.017.

A rectangular swimming pool has dimensions of 25 m x 9 m and a depth of...

A rectangular swimming pool has dimensions of 25 m x 9 m and a depth of 1.8 m and is full to the brim with water. Determine a) the absolute pressure at the bottom of the pool, b) the total force on the bottom of the pool, and c) the absolute pressure at point P, a point on the side of the pool just near the bottom. (Worth 2 pts)

A rectangular swimming pool is 8.0 m × 35 m in area. The depth varies uniformly...

A rectangular swimming pool is 8.0 m × 35 m in area. The depth varies uniformly from 1.0 m in the shallow end to 3.0 m in the deep end. Determine the pressure at the bottom of the deep end of the pool. (Express your answer to two significant figures.) Determine the pressure at the bottom of the shallow end of the pool. (Express your answer to two significant figures.) What is the net force on the bottom of the...

In a rectangular cross-section canal with a width of 10 m and a depth of 1.5...

In a rectangular cross-section canal with a width of 10 m and a depth of 1.5 m, uniform and Continuous current monitoring is applied. The channel's Manning coefficient includes 0.015. Base because its slope is 0.0005. Considering this information a) By writing the numerical magnitude of water face slope and energy line slope and its rationale Set. b) Calculate the speed of the current in the channel. c) Calculate the flow of the current in the channel. d ) When...

Question