Question

In: Mechanical Engineering

A homogeneous sphere S, a uniform cylinder C, and a thin pipe P are in contact...

A homogeneous sphere S, a uniform cylinder C, and a thin pipe P are in contact when they are released from rest on the incline shown. Knowing that all three objects roll without slipping, determine, after 9s of motion, if theta=27 degrees, Find

1. acceleration of sphere down the incline (m/s^2)
2. acceleration of pipe down the incline (m/s^2)
3. The distance between the centers of the cylinder and the sphere (m)
4. Acceleration of cylinder down the incline (m/s^2)
5. the distance between the centers of the pipe and the cylinder (m)

Solutions

Expert Solution


Related Solutions

A solid homogeneous cylinder and a solid homogeneous sphere each have the same mass and radius....
A solid homogeneous cylinder and a solid homogeneous sphere each have the same mass and radius. They both roll without slipping, have the same linear speed and approach the same inclined plane.  As they roll up the inclined plane, they continue to roll without slipping. Which object will reach the greatest height on the inclined plane? A: solid homogeneous cylinder B: solid homogeneous sphere C: they both reach the same maximum height If you could explain why in your answer...
A solid sphere, a follow sphere, and a ring (a hollow cylinder) of uniform density, each...
A solid sphere, a follow sphere, and a ring (a hollow cylinder) of uniform density, each with radius 0.24m and mass 2.6kg roll without slipping on a flat surface at an angular speed of 6.1 rad/s. They then roll without slipping up an incline. 1. What is the linear speed of the center of mass of the ring when it is rolling on the flat surface? 2. What happens as the objects roll up the incline? 3. How high up...
A pendulum is constructed from a thin, rigid, and uniform rod with a small sphere attached...
A pendulum is constructed from a thin, rigid, and uniform rod with a small sphere attached to the end opposite the pivot. This arrangement is a good approximation to a simple pendulum (period = 5.87 s), because the mass of the sphere (lead) is much greater than the mass of the rod (aluminum). When the sphere is removed, the pendulum is no longer a simple pendulum, but is then a physical pendulum. What is the period of the physical pendulum?
Sketch a 5 kg thin flat uniform homogeneous square plate of side 600 mm, with a...
Sketch a 5 kg thin flat uniform homogeneous square plate of side 600 mm, with a circular opening of radius 100 mm. Determine the area and the mass moments of inertia about the center of mass.
A thin plate is initially at a uniform temperature of 200°C. At a certain timet =...
A thin plate is initially at a uniform temperature of 200°C. At a certain timet = 0 the temperature of the east side of the plate is suddenly reduced to 0°C. The other surface is insulated. Use the explicit finite volume method in con- junction with a suitable time step size to calculate the transient temperature distribution of the slab and compare it with the analytical solution at time (i) t = 40 s, (ii) t = 80 s and...
A uniform solid sphere is rolling along a horizontal surface at 20. m/s. It approaches an...
A uniform solid sphere is rolling along a horizontal surface at 20. m/s. It approaches an incline surface making an angle of 30.° with the horizontal. How far along the incline (x) will the sphere travel before coming to a stop? Note: sinq = h/x             QIN = QOUT      KLinear + KRotational = UG
Air, at p = 1 atm and a temperature of 60 ° C enters a thin-walled...
Air, at p = 1 atm and a temperature of 60 ° C enters a thin-walled (d = 5.0 mm) and long (l = 3 m) tube. A constant thermal flow is applied to the air from the tube walls. The mass air flow is 1.5x10^(-04) kg / s. If the temperature on the surface of the tube at its outlet is 120 ° C, determine the rate of heat transfer entering the tube. Use the air properties for 400...
Consider a 2.5cm diameter thin walled horizontal cylindrical pipe that carries chilled water at about 5°C....
Consider a 2.5cm diameter thin walled horizontal cylindrical pipe that carries chilled water at about 5°C. The pipe is very long and is indoors in a climate controlled area with essentially still air. Design an insulation system that will reduce heat gain per unit length of pipe by at least 75% as compared to the heat gain to the bare pipe. Completely specify the insulation system (materials, dimensions, etc.) you design.
A solid cylinder of radius 1.5 m has a uniform volume charge density of 15 C/m3....
A solid cylinder of radius 1.5 m has a uniform volume charge density of 15 C/m3. Find the magnitude of the electric field at 1.25 m from the axis of the cylinder. a) what will your gaussian surface be? Make a sketch of the solid cylinder and the gaussian surface with their radii b) Write an expression for the total electric flux through the gaussian surface, that is the LHS (Left hand side) of the Gauss' law (this expression may...
A solid sphere 10 cm in radius carries a uniform 40-?C charge distribution throughout its volume....
A solid sphere 10 cm in radius carries a uniform 40-?C charge distribution throughout its volume. It is surrounded by a concentric shell 20 cm in radius, also uniformly charged with 40 ?C. Find the electric field 5.0 cm from the center.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT