**A crate with a mass of 45 kg is suspended from a massless rope that runs...

**A crate with a mass of 45 kg is suspended from a massless rope that runs vertically upward over a light pulley. The other end of the rope is connected to a 35 kg crate, which lies on a tabletop. The coefficients of the kinetic friction and the static friction between the crate and the surface are 0.3 and 0.5 respectively. An applied force, F, pulls the 35 kg crate to the right.

In the first case, the applied force is just sufficient to keep the crates from sliding. Draw clearly labeled free-body diagrams for each crates including all forces drawn to scale.
How much force would need to be applied in this first case?
In the second case, the 35 kg crate is sliding to the right with a constant velocity. Draw clearly labeled free-body diagrams for each crate including all forces drawn to scale.
How much force would need to be applied in this second case?
In the third case, the 35 kg crate moves to the right at a constant acceleration of 0.5 m/s². Draw clearly labeled free-body diagrams for each crates including all forces drawn to scale. In this instance, draw the direction of acceleration next to each diagram.
How much force would need to be applied in the third case.

Solutions

Expert Solution

genius_generous answered 1 month ago

Next > < Previous

Related Solutions

A bucket of water of mass 16.0 kg is suspended by a rope wrapped around a...

A bucket of water of mass 16.0 kg is suspended by a rope wrapped around a windlass, that is a solid cylinder with diameter 0.320 m with mass 13.0 kg . The cylinder pivots on a frictionless axle through its center. The bucket is released from rest at the top of a well and falls a distance 10.6 m to the water. You can ignore the weight of the rope. What is the tension in the rope while the bucket...

Two masses, 4.0 kg and 6.0 kg, are connected by a "massless" rope over a "frictionless"...

Two masses, 4.0 kg and 6.0 kg, are connected by a "massless" rope over a "frictionless" pulley as pictured in the diagram. The ramp is inclined at 30.0 degrees and the coefficient of kinetic friction on the ramp is 0.18. a) determine acceleration of the system once it begins to slide b) determine tension in the rope. Show all work

A simple pendulum may be described ideally as a point mass suspended by a massless string...

A simple pendulum may be described ideally as a point mass suspended by a massless string from some point about which it is allowed to swing back and forth in a place. A simple pendulum can be approximated by a small metal sphere which has a small radius and a large mass when compared relatively to the length and mass of the light string from which it is suspended. If a pendulum is set in motion so that is swings...

A bungee jumper of mass 110 kg jumps from a cliff of height 120m. The massless...

A bungee jumper of mass 110 kg jumps from a cliff of height 120m. The massless relaxed bungee cord has a length of 15 m. Ignore the height of the body of the jumper. K=125N/m. (a) Find the velocity of the jumper right before the bungee starts to stretch. (b) Find the distance the cord stretches. Please explain the steps. Thank you!

A mass m = 1 kg is suspended from a spring that is stretched 1 cm...

A mass m = 1 kg is suspended from a spring that is stretched 1 cm under the influence of the weight of this mass. Now a periodic force is applied external of F (t) = 200 cos (vt) on the mass, which was initially in static balance. Disregarding all friction, get a relationship for position of the mass as a function of time, x (t). Also determine the value of ω which will cause resonance to occur

A square plastic chunk with mass 0.750 kg is suspended from the lower end of a...

A square plastic chunk with mass 0.750 kg is suspended from the lower end of a light cord that is 1.66 mm long. The plastic chunk is stay still in the beginning without any motion. A bullet with mass 0.0132 kg is on the way to the plastic chunk with a horizontal velocity v0. The bullet hits the plastic chunk and then embedded in it. After collision, combined bullet and plastic chunk swings on the end of the cord. When...

A 24 kg mass is connected to a nail on a frictionless table by a massless...

A 24 kg mass is connected to a nail on a frictionless table by a massless string 1.1 m long. There is no appreciable friction between the nail and the string. If the tension in the string is 54 N while the mass moves in a uniform circle on the table, how long does it take for the mass to make one complete revolution? (Give answer to the nearest 0.1 s)

10 kg crate is pulled 4.9 m up a 34 degree incline by a rope angled...

10 kg crate is pulled 4.9 m up a 34 degree incline by a rope angled 16 degree above the incline. The tension in the rope is 125 N, and the crate's coefficient of kinetic friction on the incline is 0.26. How much work is done by: a. Tension? J b. Gravity? J c. Normal Force? J d. What is the increase in thermal energy of the crate and incline? J

Suspended Mass (kg) Weight of Suspended Mass (mass x 9.8 m/s2), Newtons Time (sec) Average Time...

Suspended Mass (kg) Weight of Suspended Mass (mass x 9.8 m/s2), Newtons Time (sec) Average Time Average Time2 d (m) 2d (m) Acceleration = 2d/t2 3 Washers 0.0143 0.14N Trial 1: 1.76 1.84 s 0.34 m/s2 0.6m 1.2m 0.35 m/s2 Trial 2: 1.86 Trial 3: 1.90 4 Washers 0.0191 0.19N Trial 1: 1.50 1.1 s 1.21 s2 0.6m 1.2m 0.99 m/s2 Trial 2: 1.50 Trial 3: 1.45 5 Washers 0.025 0.25N Trial 1: 1.23 1.23 s 1.51 s2 0.6m 1.2m...

A mass of 2 kg is suspended from a spring with known spring constant of 10N/m...

A mass of 2 kg is suspended from a spring with known spring constant of 10N/m and allowed to come to rest. it is then set in motion by giving it an initial velocity of 150 cm/sec. Find an expression for the motion of the mass, assuming no air resistance.

Subjects