Question

In: Physics

Point B is at < 8.9, 4.0, 14.4 > ft. A force vector of < 15,...

Point B is at < 8.9, 4.0, 14.4 > ft. A force vector of < 15, 37, 21 > pounds is applied at point B.

A) Determine the x-component of the torque of the force about the origin.
(include units with answer)

B) Determine the magnitude of the torque about the origin.
(include units with answer)

C) Point C is at <-3.7, -9.0, 8.1>ft. Determine the x-component of the torque of the force about the point C.
(include units with answer)

D) Determine the magnitude of the torque about the point C.
(include units with answer)

Solutions

Expert Solution

Please give a positive rating by clicking on the thumbs up ? button if you get benefited from this answer? have a good day ahead. Thank you?


Related Solutions

1. Find the magnetic force vector on a point charge Q located on the z-axis at...
1. Find the magnetic force vector on a point charge Q located on the z-axis at z when a solid, finite cylinder of uniform charge density rho and radius w is centered on the z-axis from z1 to z2. Answer in terms of epsilon, 2. Find the electric field vector a distance z in the z-direction above the center of an infinite horizontal plane of uniform surface charge density sigma. Answer in terms of epsilon.
A rectangular swimming pool is 5 ft deep, 10 ft wide, and 15 ft long. The...
A rectangular swimming pool is 5 ft deep, 10 ft wide, and 15 ft long. The pool is filled with water to 1 ft below the top.  If the weight density of water is 62.4 lb / ft3 and if x = 0 corresponds to the bottom of the tank, then which of the following represents the work done (in ft-lb) in pumping all the water into a drain at the top edge of the pool?
The electric field at a point in space is a measure of (a) The total charge on an object at that point. (b) The electric force on any charged object at that point.
The electric field at a point in space is a measure of(a) The total charge on an object at that point.(b) The electric force on any charged object at that point.(c) The charge-to-mass ratio of an object at that point.(d) The electric force per unit mass on a point charge at that point.(e) The electric force per unit charge on a point charge at that point.
A 15 ft ladder leans against a wall. The bottom of the ladder is 3 ft...
A 15 ft ladder leans against a wall. The bottom of the ladder is 3 ft from the wall at time t=0 and slides away from the wall at a rate of 1 ft/sec. Find the velocity of the top of the ladder at time t=3. The velocity of the ladder at time t=3 is --ft/sec
1. A living room is 15 ft x 19 ft. The walls of the room are...
1. A living room is 15 ft x 19 ft. The walls of the room are 8.5 ft tall. Calculate the total area of the West wall? How many rolls of wallpaper will you need to cover the wall. One roll will cover 44 square feet What will be the cost of the wallpaper? ($14.99 for a pack of 2 rolls) 2. Calculate the following for the remaining walls Calculate the total area of the North Wall. (Note: You are...
Verify using an example that vector a + (vector b * vector c) is not equal...
Verify using an example that vector a + (vector b * vector c) is not equal to (vector a + vector b) * (vector a + vector c) explain the problem that arrises
The figure gives the acceleration of a 4.0 kg particle as an applied force moves it...
The figure gives the acceleration of a 4.0 kg particle as an applied force moves it from rest along an x axis from x = 0 to x = 9.0 m. The scale of the figure's vertical axis is set by as = 8.0 m/s2. How much work has the force done on the particle when the particle reaches (a) x = 4.0 m, (b) x = 7.0 m, and (c) x = 9.0 m? What is the particle's speed...
MATLAB. A three vector force system has forces as outlined, use a three element vector to...
MATLAB. A three vector force system has forces as outlined, use a three element vector to represent the x, y, and z terms respectively, F = [x_value, y_value, z_value]. Find the resultant force when: F1 has a magnitude of 120 N and is in the x-y plane, 35 degrees BELOW the positive x axis, F2 has a magnitude of 810 N and is in the x-z plane, 100 degrees ABOVE the positive x axis, and F3 has a magnitude of...
if two parallel planes, vector n1* vector x = a, vector n2* vector x = b....
if two parallel planes, vector n1* vector x = a, vector n2* vector x = b. How to describe their distance?
If the slab is 21 ft wide x 36 ft long x 15 inches deep with...
If the slab is 21 ft wide x 36 ft long x 15 inches deep with the total steel reinforcement of 20,000 ft of #5 bar. Find the quantity of concrete required (in cubic yards). The capacity of concrete truck is 9 cubic yards. Assume waste factor as 10%. Density of steel is 490 lbs/cubic feet. (a) Calculate Slab Volume: (b)Calculate Steel Volume and Weight: (c) Calculate concrete Volume:
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT