Question

In: Civil Engineering

A rectangular detention basin will be connected to outlet of the above drainage system to reduce...

A rectangular detention basin will be connected to outlet of the above drainage system to reduce the peak flow rate to 5m3/s. Determine the dimensions of the basin if the length of the basin is 3 times of the width. An orifice will be used as the outlet of the basin and the depth of water above the center of the orifice should be less than 2m. What is the size of the orifice?

Solutions

Expert Solution

I think this solution might be helpful to u. Be happy keep learning.


Related Solutions

It is believed that the design of appurtenances in the stilling basin can reduce the basin...
It is believed that the design of appurtenances in the stilling basin can reduce the basin length by 70- 80%. Give comments on this statement.
Water flows from a large 4m detention basin (100m by 50m) along a 200mm diameter pipe...
Water flows from a large 4m detention basin (100m by 50m) along a 200mm diameter pipe for a distance of 100m at a slope of 1:200. The pipe centerline is 300mm above the base of the basin and it drains freely to a nearby channel. Calculate the steady flow rate if: (a) the flow is assumed ideal, (b) the pipe is considered smooth for the purposes of the Moody Diagram. (c) the pipe has a relative roughness of 0.006. (d)...
Design a roof drainage system?
Design a roof drainage system?
Consider a 2-acre detention basin with vertical walls. The triangular inflow hydrograph increases linearly from zero...
Consider a 2-acre detention basin with vertical walls. The triangular inflow hydrograph increases linearly from zero to a peak of 60 cfs at 60 min and then decreases linearly to a zero discharge at 180 min. Route the inflow hydrograph through the detention basin using the head discharge curve for the 5-ft pipe spillway in table below. The pipe is located at the bottom of the basin. Assuming the basin is initially empty, use the level pool routing procedure with...
Design a community drainage system for 20O people
Design a community drainage system for 20O people
1.A circuit of resistors connected in series is plugged in a 120 V outlet. What can...
1.A circuit of resistors connected in series is plugged in a 120 V outlet. What can you tell about the voltage on each of resistor and current in each resistor? 2.A circuit of capacitors connected in parallel is plugged in a 120 V outlet. What can you tell about the voltage on each capacitor and current in each capacitor?
Prepare an earned value schedule for a public construction project improving the drainage system of a...
Prepare an earned value schedule for a public construction project improving the drainage system of a neighborhood street.
a) Based on standard design principles and practices, describe how the roof and drainage system of...
a) Based on standard design principles and practices, describe how the roof and drainage system of a building may be designed. b) Describe three main drainage systems which are typically required in a building. c) What are the main stages of a structural construction project? d) Identify at least three promising building materials’ trends in the construction industry in recent years. My subject is Plant Engineering
Road engineering: Explain with diagrams, the concept of the major and minor drainage system approach.
Road engineering: Explain with diagrams, the concept of the major and minor drainage system approach.
If you needed to reduce deflection in a loaded aluminum rectangular box beam in your structural...
If you needed to reduce deflection in a loaded aluminum rectangular box beam in your structural design, which of the following variables would you INCREASE? : -Length -Outer width -Outer height -Inner width -Inner height Which would be the MOST effective in reducing deflection? What material could you substitute for aluminum in your design to decrease deflection? Why?   
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT