Question

In: Civil Engineering

A 12-in-diameter well completely penetrates a 130-ft-thick, unconfined aquifer with a coefficient of permeability of 0.00055...

A 12-in-diameter well completely penetrates a 130-ft-thick, unconfined aquifer with a coefficient of permeability of 0.00055 ft/sec. If the radius of influence of the well is 500 feet and the drawdown at an observation well 250 ft away is 5 ft, determine the steady state well discharge and the drawdown at the well.

Solutions

Expert Solution

Ally Wells answered 8 months ago
Next > < Previous

Related Solutions

A 12-inch well penetrating a 100-ft thick eenfinedr aquifer is pumped at a rate of 100...
A 12-inch well penetrating a 100-ft thick eenfinedr aquifer is pumped at a rate of 100 gpm for 10 years. Determine the drawdown of 100-ft from the well. The storage coefficient of the aquifer is 0.001, permeability 500 gpd/ft, r/B = 0.2, and porosity= 0.3?
At 130°C, a bronze hoop 20 mm thick whose inside diameter is 600 mm just fits...
At 130°C, a bronze hoop 20 mm thick whose inside diameter is 600 mm just fits snugly over a steel hoop 15 mm thick. Both hoops are 100 mm wide. Compute the contact pressure between the hoops when the temperature drops to 20°C. Neglect the possibility that the inner ring may buckle. For steel, E = 200 GPa and α = 11.7μm/(m.°C). For bronze, E = 83 GPa α = 19 μm/(m.°C)
At 130°C, a bronze hoop 20 mm thick whose inside diameter is 600 mm just fits...
At 130°C, a bronze hoop 20 mm thick whose inside diameter is 600 mm just fits snugly over a steel hoop 15 mm thick. Both hoops are 100 mm wide. Compute the contact pressure between the hoops when the temperature drops to 20°C. Neglect the possibility that the inner ring may buckle. For steel, E = 200 GPa and α = 11.7μm/(m.°C). For bronze, E = 83 GPa α = 19 μm/(m.°C) At 130°C, a bronze hoop 20 mm thick...
4-) Given the following data: Drilling Fluid Density : 12 ppg Well Depth: 10,000 ft. Drill...
4-) Given the following data: Drilling Fluid Density : 12 ppg Well Depth: 10,000 ft. Drill Bit Nozzle Sizes: 13-13-13 Pump Horsepower: 1800 Pump Volumetric Efficiency: 80% Maximum Pump Pressure: 4,500 psi Minimum Flow Rate: 350 gpm Parasitic pressure losses of 2,173 psi and 1,388 psi are anticipated while circulating mud at flow rates 500 gpm and 390 gpm respectively. a-) (10 points) Determine the parasitic pressure losses when the bit hydraulic horsepower is maximum. b-) ( 5 points) Determine...
2-) Given the following data: Drilling Fluid Density : 12 ppg Well Depth: 10,000 ft. Drill...
2-) Given the following data: Drilling Fluid Density : 12 ppg Well Depth: 10,000 ft. Drill Bit Nozzle Sizes: 13-13-13 Pump Horsepower: 1800 Pump Volumetric Efficiency: 80% Maximum Pump Pressure: 4,500 psi Minimum Flow Rate: 350 gpm Parasitic pressure losses of 2,173 psi and 1,388 psi are anticipated while circulating mud at flow rates 500 gpm and 390 gpm respectively. a-) Determine the parasitic pressure losses when the bit hydraulic horsepower is maximum. b-) Determine the optimum flow rate when...
Water flows between two reservoirs through 800 ft of 12-inch diameter welded-steel pipe. The water surface...
Water flows between two reservoirs through 800 ft of 12-inch diameter welded-steel pipe. The water surface elevation difference between the two reservoirs is 16 ft. Find the flowrate (a) assuming head loss is only due to pipe friction, and (b) Accounting for both friction losses and minor losses due to a flush square-edged pipe entrance, the pipe exit, and a half-open gate valve in the line. Assume the water temperature is 60°F.
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT