Question

In: Electrical Engineering

Design voltage x4 multiplier(Voltage quadrupler) if rms voltage of AC is 220V and frequency is 60Hz

Design voltage x4 multiplier(Voltage quadrupler) if rms voltage of AC is 220V and frequency is 60Hz

Solutions

Expert Solution

Manojponduru answered 8 months ago
Next > < Previous

Related Solutions

An ac generator with a frequency of 30.0 Hz and an rms voltage of 14.0 V...
An ac generator with a frequency of 30.0 Hz and an rms voltage of 14.0 V is connected to a 65.0 μF capacitor. 1. What is the maximum current in this circuit? 2. What is the current in the circuit when the voltage across the capacitor is 4.30 V and increasing? 3. What is the current in the circuit when the voltage across the capacitor is 4.30 V and decreasing?
An AC generator with an output rms voltage of 18 V at a frequency of 60...
An AC generator with an output rms voltage of 18 V at a frequency of 60 Hz is connected across a 3
An AC generator supplies an rms voltage of 230 V at 60.0 Hz. It is connected...
An AC generator supplies an rms voltage of 230 V at 60.0 Hz. It is connected in series with a 0.300 H inductor, a 4.30 μF capacitor and a 256 Ω resistor. What is the impedance of the circuit? What is the rms current through the resistor? What is the average power dissipated in the circuit? What is the peak current through the resistor? What is the peak voltage across the inductor? What is the peak voltage across the capacitor?...
An AC generator supplies an rms voltage of 230 V at 60.0 Hz. It is connected...
An AC generator supplies an rms voltage of 230 V at 60.0 Hz. It is connected in series with a 0.400 H inductor, a 3.40 μF capacitor and a 206 Ω resistor. What is the impedance of the circuit? Tries 0/20 What is the rms current through the resistor? Tries 0/20 What is the average power dissipated in the circuit? Tries 0/20 What is the peak current through the resistor? Tries 0/20 What is the peak voltage across the inductor?...
An AC generator supplies an rms voltage of 240 V at 50.0 Hz. It is connected...
An AC generator supplies an rms voltage of 240 V at 50.0 Hz. It is connected in series with a 0.350 H inductor, a 3.60 μF capacitor and a 211 Ω resistor. 1. What is the impedance of the circuit? 2. What is the rms current through the resistor? 3. What is the average power dissipated in the circuit? 4. What is the peak current through the resistor? 5. What is the peak voltage across the inductor? 6. What is...
The voltage amplitude of an ac source is 28.0V , and its angular frequency is 1100rad/s...
The voltage amplitude of an ac source is 28.0V , and its angular frequency is 1100rad/s . Find the current amplitude if the capacitance of a capacitor connected across the source is A) 1.00
An ac generator has a frequency of 7.5 kHz and a voltage of 35 V. When...
An ac generator has a frequency of 7.5 kHz and a voltage of 35 V. When an inductor is connected between the terminals of this generator, the current in the inductor is 30 mA. What is the inductance of the inductor?
A series ac circuit consists of a voltage source of frequency f = 60 Hz and...
A series ac circuit consists of a voltage source of frequency f = 60 Hz and source voltage amplitude 345 volts, a resistor of resistance R = 255 Ω, a capacitor of capacitance C = 6.2×10−6F, and an inductor of inductance L. (a) What must be the value of L for the phase angle Φ to be zero? (b) When L has the value calculated in (a), what is the current amplitude in the circuit?
The resistanceless inductor is connected across the ac source whose voltage amplitude is 29.0Vand angular frequency...
The resistanceless inductor is connected across the ac source whose voltage amplitude is 29.0Vand angular frequency is 1000rad/s . Find the current amplitude if the self-inductance of the inductor is A) 1.00E^-2 H? (A) B) 1.00 H? (mA) C) 100 H? (mA)
Question 6) a) What is the RMS value of an AC signal? In case of sinusoidal...
Question 6) a) What is the RMS value of an AC signal? In case of sinusoidal signals which relationship exists between RMS and maximum values? [5 marks] b) Why AC quantities cannot be added arithmetically as in DC? [5 marks] Question 7) Given the following A.C. voltage, v(t) = 80 sin (942t – π/6), state: (a) angular frequency [3 marks] (b) Period [3 marks] (c) phase difference [4 marks] Question 2) Using diagrams, state at least three (3) characteristics of...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT