1. We want to design a discrete-time bandpass filter that samples and processes analog signals. The...

1. We want to design a discrete-time bandpass filter that samples and processes analog signals. The frequency response is 0 at 0 Hz and 500 Hz, and resonant occurs at 125 Hz. The sampling interval T= 1 msec. Find the transfer function H[z] of these filters and mark the poles and zeros on the complex plane.

Solutions

Expert Solution

Manojponduru answered 1 year ago

Next > < Previous

Related Solutions

choose the correct answer 1- The spectrum of analog signals is: * Discrete and repeated every...

choose the correct answer 1- The spectrum of analog signals is: * Discrete and repeated every Fs Continuous and repeated every Fs Discrete and not repeated Continuous and not repeated 2-For the following Matlab code, how many tones are going to be played by (sound) instruction? * 4 5 6 2 1 3 3- In Assembly language, to print any number between 0 and 9 on screen using (INT 21h), you need to: * Subtract 30h from the number and...

In Matlab, Design a model for a bandpass filter with a bandwidth of 4000 Hz, and...

In Matlab, Design a model for a bandpass filter with a bandwidth of 4000 Hz, and a center frequency as specied below. Once you have the model, it is easy to programmatically change the center frequency. center frequency: 20 KHz, 24.5 KHz, 29 KHz, 33.5 KHz, 38 KHz, 42.5 KHz, 47 KHz

In Matlab, Design a model for a bandpass filter with a bandwidth of 4000 Hz, and...

1. Design a bandpass filter to meet the following specificatoins: lower stopband edge = 0.3π upper...

1. Design a bandpass filter to meet the following specificatoins: lower stopband edge = 0.3π upper stopband edge = 0.6π lower passband edge = 0.4π upper passband edge = 0.5π Rp = 0.5 dB, As = 50 dB Use a sampling frequency of 1000 Hz. You may use MATLAB and the fir1 commmand to implement. It is advisable to check the MathWorks site for help on using these commands. It is advisable to check if the commands use the ripple...

a. Design a broadband Butterworth bandpass filter with a lower cutoff frequency of 500 Hz and...

a. Design a broadband Butterworth bandpass filter with a lower cutoff frequency of 500 Hz and an upper cutoff frequency of 4500 Hz. The passband gain of the filter is 20 dB. The gain should be down at least 15 dB at 200 Hz and 11.25 kHz. Use 20 nF capacitors in the high-pass circuit and 10 k\Omega resistors in the low-pass circuit. b) Draw a circuit diagram of the filter and label all the components.

Use a 5 nF capacitor to design a series RLC bandpass filter, as shown at the...

Use a 5 nF capacitor to design a series RLC bandpass filter, as shown at the top of Fig. 14.27.The center frequency of the filter is 8 kHz, and the quality factor is 2. a) Specify the values of R and L.using pspice b) What is the lower cutoff frequency in kilohertz? using pspice c) What is the upper cutoff frequency in kilohertz?using pspice d) What is the bandwidth of the filter in kilohertz?using pspice

Design a bandpass active filter to pass frequencies between 700 Hz and 2100 Hz, and with...

Design a bandpass active filter to pass frequencies between 700 Hz and 2100 Hz, and with K= 63. Please include the transfer function, blot plot, multisim, and the matlab code.

What I am trying to do is to design a Butterworth Bandpass filter using Matlab, High...

What I am trying to do is to design a Butterworth Bandpass filter using Matlab, High frequency must equal to 16 Hz and lower frequency must be 10Hz (passBand). and the input signal must be a white noise signal. here is my code : mu=0; sigma=2; X= sigma*randn(500,1)+mu; %Generating White Noise signal Fs=500;%Sampling Frequency Fh= 16; Fl=10; order=6; [b,a]=butter(order,[Fh Fl]/(Fs/2),'bandpass');%Butterworth BandPass filter XX=filtfilt(b,a,X);%filter the signal both forward and backword in time Actually, I am not sure about Fs value that...

What is the function of a speaker? 1. convert digital electrical signals into analog electrical signals...

What is the function of a speaker? 1. convert digital electrical signals into analog electrical signals 2. convert analog electrical signals into digital electrical signals 3. convert sound waves into analog electrical signals 4. convert sound waves into digital electrical signals 5. convert digital electrical signals into sound waves 6. convert analog electrical signals into sound waves Heat transferred due to the mixing of rising hot fluids and sinking cold fluids (assisted by gravity) is known as... 1. absorption 2....

Classify each of the following processes as discrete-time or continuous-time, and discrete-space or continuous-space. (a) The...

Classify each of the following processes as discrete-time or continuous-time, and discrete-space or continuous-space. (a) The baud rate of a modem, recorded every 60 s (b) The number of people logged into Facebook throughout the day (c) The operational state, denoted 1 or 0, of a certain machine recorded at the end of each hour (d) The noise (in dB) in an audio signal measured throughout transmission

Subjects