Question

In: Electrical Engineering

In Matlab, Design a model for a bandpass filter with a bandwidth of 4000 Hz, and...

In Matlab, Design a model for a bandpass filter with a bandwidth of 4000 Hz, and a center frequency as specied below. Once you have the model, it is easy to programmatically change the center frequency.

center frequency: 20 KHz, 24.5 KHz, 29 KHz, 33.5 KHz, 38 KHz, 42.5 KHz, 47 KHz

Solutions

Expert Solution

Manojponduru answered 2 years ago
Next > < Previous

Related Solutions

In Matlab, Design a model for a bandpass filter with a bandwidth of 4000 Hz, and...
In Matlab, Design a model for a bandpass filter with a bandwidth of 4000 Hz, and a center frequency as specied below. Once you have the model, it is easy to programmatically change the center frequency. center frequency: 20 KHz, 24.5 KHz, 29 KHz, 33.5 KHz, 38 KHz, 42.5 KHz, 47 KHz
Design a bandpass active filter to pass frequencies between 700 Hz and 2100 Hz, and with...
Design a bandpass active filter to pass frequencies between 700 Hz and 2100 Hz, and with K= 63. Please include the transfer function, blot plot, multisim, and the matlab code.
a. Design a broadband Butterworth bandpass filter with a lower cutoff frequency of 500 Hz and...
a. Design a broadband Butterworth bandpass filter with a lower cutoff frequency of 500 Hz and an upper cutoff frequency of 4500 Hz. The passband gain of the filter is 20 dB. The gain should be down at least 15 dB at 200 Hz and 11.25 kHz. Use 20 nF capacitors in the high-pass circuit and 10 k\Omega resistors in the low-pass circuit. b) Draw a circuit diagram of the filter and label all the components.
What I am trying to do is to design a Butterworth Bandpass filter using Matlab, High...
What I am trying to do is to design a Butterworth Bandpass filter using Matlab, High frequency must equal to 16 Hz and lower frequency must be 10Hz (passBand). and the input signal must be a white noise signal. here is my code : mu=0; sigma=2; X= sigma*randn(500,1)+mu; %Generating White Noise signal Fs=500;%Sampling Frequency Fh= 16; Fl=10; order=6; [b,a]=butter(order,[Fh Fl]/(Fs/2),'bandpass');%Butterworth BandPass filter XX=filtfilt(b,a,X);%filter the signal both forward and backword in time Actually, I am not sure about Fs value that...
Use a 5 nF capacitor to design a series RLC bandpass filter, as shown at the...
Use a 5 nF capacitor to design a series RLC bandpass filter, as shown at the top of Fig. 14.27.The center frequency of the filter is 8 kHz, and the quality factor is 2. a) Specify the values of R and L.using pspice b) What is the lower cutoff frequency in kilohertz? using pspice c) What is the upper cutoff frequency in kilohertz?using pspice d) What is the bandwidth of the filter in kilohertz?using pspice
1. We want to design a discrete-time bandpass filter that samples and processes analog signals. The...
1. We want to design a discrete-time bandpass filter that samples and processes analog signals. The frequency response is 0 at 0 Hz and 500 Hz, and resonant occurs at 125 Hz. The sampling interval T= 1 msec. Find the transfer function H[z] of these filters and mark the poles and zeros on the complex plane.
1. Design a bandpass filter to meet the following specificatoins: lower stopband edge = 0.3π upper...
1. Design a bandpass filter to meet the following specificatoins: lower stopband edge = 0.3π upper stopband edge = 0.6π lower passband edge = 0.4π upper passband edge = 0.5π Rp = 0.5 dB, As = 50 dB Use a sampling frequency of 1000 Hz. You may use MATLAB and the fir1 commmand to implement. It is advisable to check the MathWorks site for help on using these commands. It is advisable to check if the commands use the ripple...
4)Design a band-pass filter with a passband from 500 Hz to 2000 Hz using “butter” routine...
4)Design a band-pass filter with a passband from 500 Hz to 2000 Hz using “butter” routine of MATLAB. Assume a sampling frequency of 8KHz. Let the filter order be M=4. Plot the magnitude response and provide the filter coefficients and the transfer function
In matlab using a RC low pass filter Create a 1 Hz input signal (with amplitude...
In matlab using a RC low pass filter Create a 1 Hz input signal (with amplitude of one). Corrupt the input signal with signals greater than or equal to 100 Hz and/or random noise. Use randn(length(v_in,1)) to test filter
Design a wide band pass filter with fL = 500 Hz, fH = 2kHz and a...
Design a wide band pass filter with fL = 500 Hz, fH = 2kHz and a pass band gain of 10.
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT