A cantilever of circular solid cross section is fixed at one end and carries a concentrated...

A cantilever of circular solid cross section is fixed at one end and carries a concentrated load P at the free end. The diameter at the free end is 200mm and increases uniformly to 400 mm at the fixed end over a length of 2m. At what distance from the free will the bending stresses in the cantilever be maximum? Also calculate the value of the maximum bending stress if the concentrated load P=300 KN

(a) 1.23 m, 12.32 MPa

(b) 1.5 m, 11.23 MPa

(c) 1.0 m, 11.32 MPa

(d) 1.33 m, 13.42 MPa

Expert Solution

Ally Wells answered 9 months ago

The cantilever is affixed to the free end of a square cross-section piezoelectric (PZT) block, which...

The cantilever is affixed to the free end of a square cross-section piezoelectric (PZT) block, which is fixed at the other end. Draw the schematic of the lumped-parameter model of the cantilever-PZT system, obtain the mathematical model of this mechanical system, and derive the lumped mass and stiffness of the PZT knowing that la = 0.01 m (length of PZT block), a = 0.005 m (side length of PZT cross-section), EPZT = 55 GPa (Young’s modulus), ?PZT = 7500 kg/m3...

A solid cylinder, a thin hollow cylinder (with circular cross-section), and a thick hollow cylinder (with...

A solid cylinder, a thin hollow cylinder (with circular cross-section), and a thick hollow cylinder (with a donut cross section), of equal masses radii, are simultaneously released from rest at the top of an inclined plane and roll without slipping down the plane. Which object reaches the bottom of the inclined plane first? A) The solid cylinder B) The thin hollow cylinder C) The thick hollow cylinder D) All objects reach the bottom at the same time Please provide explanation.

An infinitely long, solid non-conducting rod (cylinder) with circular cross section of radius a has its...

An infinitely long, solid non-conducting rod (cylinder) with circular cross section of radius a has its axis along the z-axis. It has a non-uniform volume charge density given in cylindrical coordinates by ρ(s) = C (s/a)^2 ,where C is a positive constant. In addition, there is a uniform volume charge density −σ on the outer cylindrical shell of radius b, where σ is a positive constant. Region 2 is a vacuum. For parts (a) through (c), use Gauss’ Law and...

An accelerator produces a beam of protons with a circular cross section that is 1.6 mm...

An accelerator produces a beam of protons with a circular cross section that is 1.6 mm in diameter and has a current of 1 mA. The current density is uniformly distributed throughout the beam. The kinetic energy of each proton is 20 MeV. The beam strikes a metal target and is absorbed by the target. 1) What is the number density of the protons in the beam? 2) How many protons strike the target in each minute? 3) What is...

The figure shows wire 1 in cross section; the wire is long and straight, carries a...

The figure shows wire 1 in cross section; the wire is long and straight, carries a current of 4.20 mA out of the page, and is at distance d1 = 2.61 cm from a surface. Wire 2, which is parallel to wire 1 and also long, is at horizontal distance d2 = 5.22 cm from wire 1 and carries a current of 7.06 mA into the page. What is the x component of the magnetic force per unit length on...

A circular Euler column with one end fixed and the other pinned (or hinged or simply-supported)...

A circular Euler column with one end fixed and the other pinned (or hinged or simply-supported) is under a compressive axial load. Given the length L of the column and bending rigidity EI, what is the buckling load Pcr ?

A Si pn junction has a circular cross section with a diameter of 10 μm. This...

A Si pn junction has a circular cross section with a diameter of 10 μm. This junction has Na = 1018 cm-3 on one side and Nd = 5 x 1015 cm-3 on the other. Calculate Xn, Xp, Q+ (total charge on n side), and E for this junction at equilibrium (300 K). Sketch E(x) and charge density to scale.

A long, straight, copper wire with a circular cross-sectional area of 2.1 mm2 carries a current...

A long, straight, copper wire with a circular cross-sectional area of 2.1 mm2 carries a current of 22 A. The resistivity of the material is 2.00 10-8?

Consider cylindrical shape rod of silicon with circular cross-section (resistivity of 3345 , the diameter of...

Consider cylindrical shape rod of silicon with circular cross-section (resistivity of 3345 , the diameter of 2.53 cm and length of 32.7 cm). Consider a voltage of 1.25*103 V is applied. The temperature coefficient of silicon is -0.005 0C-1 (negative because Silicon is a semiconductor). (a) Find the resistance of this rod at room temperature? (2 points) (b) Find the electric field inside the silicon rod? (3 points) (c) Find the energy dissipations in 3 min? (2 points) (d) If...

A very long solenoid with a circular cross section and radius r1= 1.40 cm with ns=...

A very long solenoid with a circular cross section and radius r1= 1.40 cm with ns= 300 turns/cm lies inside a short coil of radius r2= 4.40 cm and Nc= 30 turns. If the current in the solenoid is ramped at a constant rate from zero to Is= 2.10 A over a time interval of 75.0 ms, what is the magnitude of the emf in the outer coil while the current in the solenoid is changing? What is the mutual...

Question