A Si pn junction has a circular cross section with a diameter of 10 μm. This...

A Si pn junction has a circular cross section with a diameter of 10 μm. This junction
has Na = 1018 cm-3 on one side and Nd = 5 x 1015 cm-3 on the other. Calculate Xn, Xp,
Q+ (total charge on n side), and E for this junction at equilibrium (300 K). Sketch E(x)
and charge density to scale.

Expert Solution

Manojponduru answered 6 days ago

The resistance of a very fine aluminum wire with a 10 μm × 10 μm square cross section is 1200 Ω

1. The resistance of a very fine aluminum wire with a 10 μm × 10 μm square cross section is 1200 Ω . A 1200 Ω resistor is made by wrapping this wire in a spiral around a 3.4-mm-diameter glass core. Part A: How many turns of wire are needed? Express your answer using two significant figures. 2.The starter motor of a car engine draws a current of 180 A from the battery. The copper wire to the motor...

The resistance of a very fine aluminum wire with a 10 μm × 10 μm square cross section is 1200 Ω .

1. The resistance of a very fine aluminum wire with a 10 μm × 10 μm square cross section is 1200 Ω . A 1200 Ω resistor is made by wrapping this wire in a spiral around a 3.4-mm-diameter glass core. Part A: How many turns of wire are needed? Express your answer using two significant figures. 2. What is the resistance of A 50.0 cm long piece of carbon with a 0.900 mm ×× 0.900 mm square cross...

Consider cylindrical shape rod of silicon with circular cross-section (resistivity of 3345 , the diameter of...

Consider cylindrical shape rod of silicon with circular cross-section (resistivity of 3345 , the diameter of 2.53 cm and length of 32.7 cm). Consider a voltage of 1.25*103 V is applied. The temperature coefficient of silicon is -0.005 0C-1 (negative because Silicon is a semiconductor). (a) Find the resistance of this rod at room temperature? (2 points) (b) Find the electric field inside the silicon rod? (3 points) (c) Find the energy dissipations in 3 min? (2 points) (d) If...

Consider an electron beam of uniform circular cross-section with a diameter of 1 mm. The electrons...

Consider an electron beam of uniform circular cross-section with a diameter of 1 mm. The electrons are accelerated from the cathode to the anode, which are separated by 1 m. The electrons are generated at the cathode and therefore have negligible velocity at this position. The electrons accelerate at a rate of 108 ?/?2 between the cathode and anode. The current density at the anode is 104 ?/?2 . Find the current density as a function of position between the...

Consider an optical fiber that has a 200-μm core diameter and a 240-μm cladding diameter. (a)...

Consider an optical fiber that has a 200-μm core diameter and a 240-μm cladding diameter. (a) Show that the size of the active area in a bundle with two rings is 1.13 mm2. (b) Show that the ratio of the active area to the total cross sectional area of the bundle is 53 %.

A 580-mm long tungsten wire, with a 0.046-mm-diameter circular cross section, is wrapped around in the...

A 580-mm long tungsten wire, with a 0.046-mm-diameter circular cross section, is wrapped around in the shape of a coil and used as a filament in an incandescent light bulb. When the light bulb is connected to a battery, a current of 0.526 A is measured through the filament. (Note: tungsten has a resistivity of 4.9 × 10-8 ? • m.) How many electrons pass through this filament in 5 seconds? How many electrons pass through this filament in 5...

10. Consider a step pn junction made of silicon. Carrier lifetimes are given as \tau_n =...

10. Consider a step pn junction made of silicon. Carrier lifetimes are given as \tau_n = 10^{-7} sτn=10−7s and \tau_p = 10^{-7} sτp=10−7s. Assume long diode, i.e. long quasi-neutral regions. What must be the doping density ratio, N_A/N_DNA/ND, in order to have 95% of the total current in the depletion region carried by electrons? Answers within 5% error will be considered correct. 11. Consider two ideal pn junctions at T = 300\: KT=300K with exactly the same physical parameters except...

An accelerator produces a beam of protons with a circular cross section that is 1.6 mm...

An accelerator produces a beam of protons with a circular cross section that is 1.6 mm in diameter and has a current of 1 mA. The current density is uniformly distributed throughout the beam. The kinetic energy of each proton is 20 MeV. The beam strikes a metal target and is absorbed by the target. 1) What is the number density of the protons in the beam? 2) How many protons strike the target in each minute? 3) What is...

A Si pn diode has an equilibrium diffusion barrier of 0.7 V and an area capacitance...

A Si pn diode has an equilibrium diffusion barrier of 0.7 V and an area capacitance of C2D = 4 nF/cm2 for a reverse bias voltage of -4.3 V. What can you tell about the doping levels?

An infinitely long, solid non-conducting rod (cylinder) with circular cross section of radius a has its...

An infinitely long, solid non-conducting rod (cylinder) with circular cross section of radius a has its axis along the z-axis. It has a non-uniform volume charge density given in cylindrical coordinates by ρ(s) = C (s/a)^2 ,where C is a positive constant. In addition, there is a uniform volume charge density −σ on the outer cylindrical shell of radius b, where σ is a positive constant. Region 2 is a vacuum. For parts (a) through (c), use Gauss’ Law and...

Question