Question

In: Civil Engineering

a simply supported beam with a uniform distrivuted load of W compute its deflection at midspan...

a simply supported beam with a uniform distrivuted load of W compute its deflection at midspan and L/4. Draw the deformed structure.

use L=8meters
W=8

Solutions

Expert Solution

I think this will help u to understand the basic concept of the question. Be happy keep learning.


Related Solutions

use double integration method. consider a simply supported beam with uniformly distribution of load of w....
use double integration method. consider a simply supported beam with uniformly distribution of load of w. compute the deflection at midspan and at L/4 . Draw the deoformed structure. use L=8 meters, W=8
A simply supported beam 10m long carries a uniform load of 24 kN/m. Using E =...
A simply supported beam 10m long carries a uniform load of 24 kN/m. Using E = 200 GPa, I = 240x10^6 mm4 Using CBM (conjugate beam method): A. Determine the rotation (in degrees) of the beam at a point 4m from the left support. B. Determine the deflection at a point 4m from the left support.
Use A992 and select a W shape for the following beam: - Simply supported with a...
Use A992 and select a W shape for the following beam: - Simply supported with a span length of 30 ft - Braced at the ends of the beam only - Uniform dead load of .75 kips - A 34 kip point load at midspan Use ASD
Consider a simply supported beam of length L. The beam experiences a parabolically varying distributed load...
Consider a simply supported beam of length L. The beam experiences a parabolically varying distributed load that varies from 0 at the left support, to a maximum w at midspan, and back to 0 at the right support. The beam has stiffness properties EI. Give a mathematical equation that gives the value of the distributed load intensity at any distance z along the beam in terms of w, L and z. Draw the SFD and BMD of the beam, giving...
A beam 3m long is simply supported at its ends. The beam is loaded with a...
A beam 3m long is simply supported at its ends. The beam is loaded with a downward vertical load of 200N at a point 2m from the left support. USING AMM. a.) The maximum deflection is located at what distance from the left support? Answer: 1.63m b.) Calculate the maximum deflection assuming E = 50 GPa and I = 1x10^6 mm4 Answer 2.9mm
A beam 3m long is simply supported at its ends. The beam is loaded with a...
A beam 3m long is simply supported at its ends. The beam is loaded with a downward vertical load of 200N at a point 2m from the left support. Using DIM: a. The maximum deflection is located at what distance from the left support? b. Calculate the maximum deflection assuming E = 50 GPa and I = 1x10^6 mm4
A simply supported beam spans 35ft and carries a simply distrusted dead load of 0.2kip/ft including...
A simply supported beam spans 35ft and carries a simply distrusted dead load of 0.2kip/ft including the beam self-weight and live load of 0.8kip/ft. Determine the minimum required plastic section modulus and select the lightest-weight W-shape to carry the moment. Assume full lateral support and A992 steel. Design by (a) LRFD and (b) ASD
A simply supported flanged beam subjected to a factored load of 60 kN/m (including dead load...
A simply supported flanged beam subjected to a factored load of 60 kN/m (including dead load and live load). The beam has an overall depth of 600 mm including slab thickness of 100 mm. The width of the beam is 230 mm, effective span of the beam is 6.25 m and effective cover to the tension reinforcement is 50 mm. Assume M25 grade concrete and Fe415 steel. Check whether the beam needs to be designed as singly reinforced or doubly...
(1) A simply supported steel beam is 30' long and subjected to a uniform distributed 1.3...
(1) A simply supported steel beam is 30' long and subjected to a uniform distributed 1.3 kips per foot. What is the minimum required section modulus for this beam if we do not want its maximum stress to exceed 50 ksi? (2) What is the minimum inertia of the beam in the previous question if we do not want it to deflect more than 1/2" ?
A simply supported 7 ft long solid wooden beam is designed to carry a concentrated load...
A simply supported 7 ft long solid wooden beam is designed to carry a concentrated load P = 600 lbf in the center. The distance between supports is 72 inches. The cross sectional area is 2” (inches) wide and 6” (inches) high. Determine the moment of mass of the beam (lbm), inertia (in4) and deflection (in). This wood has the following material properties: Modulus of elasticity = 2.5 x 106 psi and Density = 40 lbm/ft3.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT