The reaction between ethylene and hydrogen bromide to form ethyl bromide is carried out in a...

The reaction between ethylene and hydrogen bromide to form ethyl bromide is carried out in a continuous reactors. The product stream is analyzed and is found to contain 50 mole % C2H5Br and 33.3 % HBr. The feed to the reactor contains only ethylene and hydrogen bromide.

What would be the fractional conversion of the limiting reactant and the percentage by which the other reactant is said to be its excess.

Expert Solution

Amanda K answered 10 months ago

Ethyl chloride (C2H5Cl), a substance used as a topical anesthetic, is prepared by reaction of ethylene...

Ethyl chloride (C2H5Cl), a substance used as a topical anesthetic, is prepared by reaction of ethylene with hydrogen chloride: C2 1)How much PV work is done (in kilojoules), if 84.0 g of ethylene and 130 g of HCl are allowed to react at atmospheric pressure and the volume change is -67.1 L ? 2)What is the value of ΔE (in kilojoules) for the reaction. 3)A reaction is performed in a water bath initially at 23°C which decreases to 15°C by...

Ethylene oxide (C2H4O) is made by the catalytic reaction between ethylene (C2H4) and oxygen.Fresh ethylene, pure...

Ethylene oxide (C2H4O) is made by the catalytic reaction between ethylene (C2H4) and oxygen.Fresh ethylene, pure oxygen, and recycled ethylene are mixed to give a reactor feed gas containing 55%C2H4 which enters the reactor at 1 atm absolute and 300 oC. From test experiments, the single-pass conversion of ethylene in the reactor is 54% and, of this, 72% goes to ethylene oxide and the balance decomposes to CO2 and H2O. Most of the unreacted ethylene is separated from the reactor...

A) The reaction between hydrogen and oxygen to form water is highly exothermic. Which statement is...

A) The reaction between hydrogen and oxygen to form water is highly exothermic. Which statement is true of the energies of the bonds that break and form during the reaction? The energy needed to break the required bonds is about the same as the energy released when the new bonds form. The energy needed to break the required bonds is less than the energy released when the new bonds form. The energy needed to break the required bonds is greater...

The production of ethylbenzene, a very popular industrial chemical, is carried out reacting benzene with ethylene...

The production of ethylbenzene, a very popular industrial chemical, is carried out reacting benzene with ethylene in liquid phase. This reaction takes place in a series of reactors that involve multiple side reactions and intermediates. Ethylene, being the limiting reactant, is used up first and hence a considerable amount of benzene remains unreacted. From one of the reactors in the series, the exit stream is a mixture of this unreacted benzene (1), an intermediate – toluene (2), and the product...

Consider the following reaction: CO(g)+2H2(g)⇌CH3OH(g) The reaction between CO and H2 is carried out at a...

Consider the following reaction: CO(g)+2H2(g)⇌CH3OH(g) The reaction between CO and H2 is carried out at a specific temperature with initial concentrations of CO = 0.32 M and H2 = 0.53 M. At equilibrium, the concentration of CH3OH is 0.16 M. Part A Find the equilibrium constant at this temperature. Express your answer using two significant figures.

What kind of intermolecular forces act between a hydrogen cyanide (HCN) molecule and a hydrogen bromide molecule?

What kind of intermolecular forces act between a hydrogen cyanide (HCN) molecule and a hydrogen bromide molecule? Note: If there is more than one type of intermolecular force that acts, be sure to list them all, with a comma between the name of each force.

The reaction of CH4 is carried out at a different temperature with an initial concentration of...

The reaction of CH4 is carried out at a different temperature with an initial concentration of [CH4] = 9.9×10−2 M . At equilibrium, the concentration of H2 is 2.0×10−2 M 2CH4(g)⇌C2H2(g)+3H2(g) whats the equilibrium constant

The synthesis of methanol from carbon monoxide and hydrogen is carried out in a continuous vapor...

The synthesis of methanol from carbon monoxide and hydrogen is carried out in a continuous vapor phase reactor at 5.00 atm absolute. The feed contains CO and H2 in stoichiometric proportion and enters the reactor at 25 oC and 5 atm at a rate of 17.1 m3/h. The product stream emerges from the reactor at 127 oC. The rate of heat transfer from the reactor is 17.05 kW. Calculate the fractional conversion achieved and the volumetric flow rate (m3/h) of...

List 5 reactions to produce Ethyl Bromide and show the mechanisms

The gas phase reaction 2A + B →2C is carried out isothermally and isobarically. The reaction ...

The gas phase reaction 2A + B →2C is carried out isothermally and isobarically. The reaction is first order in A and first order in B. The feed is equal molar in A and B and the entering concentration of A is 0.5 mol/dm3. The specific reaction rate is k = 4.0 dm3/mol s. Write the rate of reaction, –rA, solely as a function of conversion, evaluating all parameters.

Question