A rehabilitationwork will be carried out to retrofitseveral
columns of a reinforced concrete multi-
storey car...
A rehabilitationwork will be carried out to retrofitseveral
columns of a reinforced concrete multi-
storey car park which have exhibited extensive cracking and
spalling due to carbonation induced
corrosion. Being in Malaysia, the surrounding temperature is
expected to be stable throughout
the year. In order to ensure that loads are distributed
equally throughout the area of the affected
columns, the repair area should carry part of the imposed
load. Thus, in order to ensure effective
load sharing and durable repair work, the selected repair
material should possess certain
important properties. Identify and discuss five (5) of those
important properties with appropriate
justificationsfor each one.
Solutions
Expert Solution
P.S please do give a thumbs up since we are expert take pain and
take our time out by typing answer in lucid language and putting
best of our knowledge at your doorstep
Design a reinforced concrete wall footing to carry a 10 in thick
reinforced concrete wall. Service loads are 6 kips/ft dead load and
15 kips/ft live load. The allowable soil pressure is 2 tons per sf.
Assume that the bottom of the footing is to be 8.5 feet below grade
and the weight of the soil can be assume to be 110 PCF. Assume that
the steel is uncoated and the soil pressuregiven is gross allowable
soil pressure. Use fy...
A reinforced concrete beam of normal weight concrete with an
effective depth of 20 IN and a width of 12 IN is reinforced with 3
IN2 of grade 60 (fy = 60 KSI) rebar. The beam has a concrete
compressive strength f’c of 3000 PSI.
(a) Determine the maximum ultimate moment which can be applied
to the beam.
(b) If the only dead load on the beam is self-weight, determine
the allowable uniformly distributed live load which can be applied...
Design a concrete mix for reinforced concrete beams of a
structure. The structure is located in a locality wherein water has
excess of chlorides in it. Required average compressive strength of
concrete has been determined to be 4700 psi. Beams have
cross-section of 9 in. x 21 in. reinforced with 4 # 6 bars.
Reinforcement has a concrete cover of 1.25 in. and there is a clear
space of 1.0 in. between form surface and steel bars. Fine
aggregate has...