Question

In: Physics

The strength of the magnetic field within a solenoid is B = 3.9 x 10-2 T...

The strength of the magnetic field within a solenoid is B = 3.9 x 10-2 T (outside the solenoid B = 0). A smaller, single loop is placed in the solenoid parallel to the plane of each loop in the solenoid. The resistance of the solenoid is 5.4 Ω, the resistance of the loop is 0.29 Ω, the diameter of the solenoid is 0.07 m, and the diameter of the loop is 0.04 m. An emf of 12 V is placed across the ends of the solenoid and the length of the solenoid is 0.4 m.

1) What is the total number of turns of the solenoid? N = turns

2) What is the magnitude of the magnetic flux through the loop inside the solenoid (remember, it only has one turn and the normal to the loop is parallel to the axis of the solenoid.) flux = T-m2

3) If the emf across the solenoid is varied so that the current in the solenoid now decreases to zero at a constant rate over a time interval of 7.8 seconds, what is the current through the loop during this time? (If the direction of the induced current in the loop is in the same direction as the current in the solenoid, give your answer as a positive value; if the direction of the induced current in the loop is in the opposite direction compared to the current in the solenoid, give your answer as a negative value.) I =

Solutions

Expert Solution


Related Solutions

Magnetic field in a solenoid is what
Magnetic field in a solenoid is what
a) What current is needed to generate the magnetic field strength of 5.0*10^-5 T at a...
a) What current is needed to generate the magnetic field strength of 5.0*10^-5 T at a point 2.3 cm from a long, straight wire? b) What current is needed to generate the magnetic field strength of 5.0*10^-3 T at a point 2.3 cm from a long, straight wire? c) What current is needed to generate the magnetic field strength of 1 T at a point 2.3 cm from a long, straight wire? d) What current is needed to generate the...
1. Determine the strength of the Earth's magnetic field (8.00 x 10-5T) on an airplane that...
1. Determine the strength of the Earth's magnetic field (8.00 x 10-5T) on an airplane that acquires a static charge of 0.500 ?C traveling east at 660 m / s. 2. Determine the radius of the circular path of an electron that enters perpendicular to the magnetic field of the Earth (1.00 x 10-5 T) with a speed of 7.50 x 106 m / s.
Magnetic Field inside a Very Long Solenoid
The solenoid has length L, diameter D, and n turns per unit length with each carrying current .It is usual to assume that thecomponent of the current along the z axisis negligible.(This may be assured by winding two layers of closely spaced wiresthat spiral in opposite directions.)From symmetry considerations it is possible to show that farfrom the ends of the solenoid, the magnetic field isaxial.Which figure shows the loop that the must beused as the Ampèrean loop for finding Bz(r) for...
A uniform magnetic field of strength .0050 T is directed out of the page. A wire...
A uniform magnetic field of strength .0050 T is directed out of the page. A wire oriented vertically in the field carries a current of 1.20 A up. a) Sketch the situation. b) Indicate the direction of the force on the wire. c) Find the magnitude of the force/length on the wire.
1 a) What is the approximate electric field strength and magnetic field strength of the electromagnetic...
1 a) What is the approximate electric field strength and magnetic field strength of the electromagnetic waves radiated by a 60-W lightbulb, as measured 5.5 m from the bulb? You can assume that the bulb is 100% efficient in converting electrical energy to light energy. b.) Incandescent light bulbs are very inefficient. Find the electric field strength and magnetic field strength assuming 5% efficiency. Please show all work, thank you!
The magnetic field inside a 4.0-cm-diameter superconducting solenoid varies sinusoidally between 8.0 T and 12.0 T...
The magnetic field inside a 4.0-cm-diameter superconducting solenoid varies sinusoidally between 8.0 T and 12.0 T at a frequency of 7.0Hz .What is the maximum electric field strength at a point 2.0cm from the solenoid axis? What is the value of B at the instant E reaches its maximum value?
1.Explain how a solenoid works - how does it produce a magnetic field? 2. What are...
1.Explain how a solenoid works - how does it produce a magnetic field? 2. What are the five major types of magnetic materials? Describe each briefly.
Derive the energy density for the magnetic field in a solenoid and use that result along...
Derive the energy density for the magnetic field in a solenoid and use that result along with the result for the electric energy density derived in class to find the time dependent Poynting vector.
1.) the magnitude of the magnetic field outside of a solenoid is: -almost zero -depends on...
1.) the magnitude of the magnetic field outside of a solenoid is: -almost zero -depends on the type of wire used -depends on the radius 2.) two wires emerge from a clock face at 90° from the face. One wire is at 3 o’clock and has a current of 2.5 A coming out of the clock face. The other is at 9 o’clock and has a current of 5.0A coming out of the clock face. What can we say about...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT