Compute the wet area, wet perimeter, hydraulic radius and hydraulic depth for the trapezoidal channel section...

Compute the wet area, wet perimeter, hydraulic radius and hydraulic depth for the trapezoidal channel section with the following data: water depth = 5.5 ft, bottom width = 25 ft and side slopes 1:2.

Expert Solution

Since the answer includes certain diagrams and equations, I preferred handwritten notes. Hope everything is clear for you and it really helped you. Thank you.

The calculations for the problem is given below. The results are tabulated at the end of the answer.

Ally Wells answered 11 months ago

Question 1 Calculate the Hydraulic Radius for a trapezoidal channel that has a bottom width of...

Question 1 Calculate the Hydraulic Radius for a trapezoidal channel that has a bottom width of 4 feet, side slopes, s = 20, a Manning’s n value of 0.012, and bottom slope of 1.5%, and a depth of flow of 1 foot. a. 0.54 ft b. 1.3 ft c. 2.1 ft d. 2.9 ft e. 3.7 ft 2 points Question 2 A trapezoidal channel that has a bottom width of 4 feet, side slopes 2:1 (H:V) and bottom slope of...

Compute the normal depth (y) in a trapezoidal channel having a bottom-width 10 m, side slopes...

Compute the normal depth (y) in a trapezoidal channel having a bottom-width 10 m, side slopes 1H to 1V and carrying a flow of 30 m3/s. The slope of the channel bottom is So = 0.001 and n = 0.013. A. B. C. D.

The sequent depth, ys of a hydraulic jump in a rectangular channel is related to the...

The sequent depth, ys of a hydraulic jump in a rectangular channel is related to the initial yi, the discharge per unit length, q, gravity acceleration, g and density r. Express the ratio ys/yi in term of non-dimensional group and compare with the equation developed from momentum principles as shown below: ?! #

Hydraulic engineering: A trapezoidal channel that has a 15 foot bottom width, Manning’s roughness coefficient of...

Hydraulic engineering: A trapezoidal channel that has a 15 foot bottom width, Manning’s roughness coefficient of 0.033, bed slope of 0.0021 ft/ft, symmetrical side slopes of 4H:1V (s = 4), and conveys 250 cfs. It is dammed up to a depth of 4 feet. How far back upstream will it take for the M1 curve to reach normal depth? a. 1,430 ft. b. 1,894 ft. c. 2,302 ft. d. 2,934 ft. e. 3,486 ft.

An irrigation canal with trapezoidal cross-section has the following elements: bottom width = 2m, depth of...

An irrigation canal with trapezoidal cross-section has the following elements: bottom width = 2m, depth of water = 0.9m, side slope 1.5H to 1V, slope of canal bed = 0.001, n = 0.025. The canal will serve clay-loam rice land. What is the hydraulic radius in meters? What is the mean velocity in m/s? If the canal will serve a clay-load rice land, determine the area in hectares it can serve if the duty of water per hectare is 3L/s.

in Matlab, Use the Monte Carlo analysis to compute the area of a circle with radius...

in Matlab, Use the Monte Carlo analysis to compute the area of a circle with radius 1. print out your code, at least one figure on which the circle and ‘dart hits’ are shown, and numerical results for N=10, 100,1000. For each N, repeat the calculation at least 5times.

Question