Question

In: Civil Engineering

An irrigation canal with trapezoidal cross-section has the following elements: bottom width = 2m, depth of...

An irrigation canal with trapezoidal cross-section has the following elements: bottom width = 2m, depth of water = 0.9m, side slope 1.5H to 1V, slope of canal bed = 0.001, n = 0.025. The canal will serve clay-loam rice land.

What is the hydraulic radius in meters?

What is the mean velocity in m/s?

If the canal will serve a clay-load rice land, determine the area in hectares it can serve if the duty of water per hectare is 3L/s.

Solutions

Expert Solution


Related Solutions

Design a canal having a trapezoidal cross section to carry a design discharge of irrigation water...
Design a canal having a trapezoidal cross section to carry a design discharge of irrigation water of 900 cfs. The slope of the canal is to be 0.002. The canal is to be lined with concrete, and it is to have the best hydraulic section for the design flow. Adopt a Manning’s roughness coefficient ? for lined canals under (troweled concrete) ? = 0.012.
In a rectangular cross-section canal with a width of 10 m and a depth of 1.5...
In a rectangular cross-section canal with a width of 10 m and a depth of 1.5 m, uniform and Continuous current monitoring is applied. The channel's Manning coefficient includes 0.015. Base because its slope is 0.0005. Considering this information a) By writing the numerical magnitude of water face slope and energy line slope and its rationale Set. b) Calculate the speed of the current in the channel. c) Calculate the flow of the current in the channel. d ) When...
Compute the normal depth (y) in a trapezoidal channel having a bottom-width 10 m, side slopes...
Compute the normal depth (y) in a trapezoidal channel having a bottom-width 10 m, side slopes 1H to 1V and carrying a flow of 30 m3/s. The slope of the channel bottom is So = 0.001 and n = 0.013. A. B. C. D.  
A trapezoidal channel has a bottom width of 3.25 m and sides with a slope of...
A trapezoidal channel has a bottom width of 3.25 m and sides with a slope of 1 vertical to 1.5 horizontal. The slope of the bed is 1 in 2000 and the depth of water is 1.2 m. a) Using the Manning Formula with n = 0.025, calculate the velocity and the discharge rate of the flow. b) Calculate the Chezy number for the channel and use that to re- calculate the velocity and the discharge rate of the flow....
A trapezoidal wall 2.75m in height has a bottom width 5m and upper width 4.5m. Determine...
A trapezoidal wall 2.75m in height has a bottom width 5m and upper width 4.5m. Determine quantity of cement and sand of mortar for CHB Laying using class A mixture for 10x20x40CHB
Question 1 Calculate the Hydraulic Radius for a trapezoidal channel that has a bottom width of...
Question 1 Calculate the Hydraulic Radius for a trapezoidal channel that has a bottom width of 4 feet, side slopes, s = 20, a Manning’s n value of 0.012, and bottom slope of 1.5%, and a depth of flow of 1 foot. a. 0.54 ft b. 1.3 ft c. 2.1 ft d. 2.9 ft e. 3.7 ft 2 points Question 2 A trapezoidal channel that has a bottom width of 4 feet, side slopes 2:1 (H:V) and bottom slope of...
A trapezoidal earthen channel that is straight and in good condition with a bottom width of...
A trapezoidal earthen channel that is straight and in good condition with a bottom width of 5.0 ft with side slopes on the left side of 2H to 1V and on the right side of 3H to 1V (two different side slopes) carries a discharge of 200 cfs for a 15-year design storm. The channel slope is 0.001 ft/ft. Determine the following: a) Normal Depth b) Critical Depth c) Critical Slope d) Froude number f) What is the flow type?
For a trapezoidal-shaped, concrete-finished gravel bottom channel along a 0.5% slope, with a bottom width of...
For a trapezoidal-shaped, concrete-finished gravel bottom channel along a 0.5% slope, with a bottom width of 8 feet, a top width of 32 feet, and side slopes of 4:1, calculate: a. the channel’s full capacity discharge, b. velocity at full capacity discharge, and c. discharge and velocity when stream flow is 0.5 feet from the top of the channel.
A trapezoidal channel that has a 15 foot bottom width, Manning’s roughness coefficient of 0.033, bed...
A trapezoidal channel that has a 15 foot bottom width, Manning’s roughness coefficient of 0.033, bed slope of 0.0021 ft/ft, symmetrical side slopes of 4H:1V (s = 4), and conveys 250 cfs. It is dammed up to a depth of 4 feet. How far back upstream will it take for the M1 curve to reach normal depth?     a.   1,430 ft.     b.   1,894 ft.     c.   2,302 ft.     d.   2,934 ft.     e.   3,486 ft.
Hydraulic engineering: A trapezoidal channel that has a 15 foot bottom width, Manning’s roughness coefficient of...
Hydraulic engineering: A trapezoidal channel that has a 15 foot bottom width, Manning’s roughness coefficient of 0.033, bed slope of 0.0021 ft/ft, symmetrical side slopes of 4H:1V (s = 4), and conveys 250 cfs. It is dammed up to a depth of 4 feet. How far back upstream will it take for the M1 curve to reach normal depth?     a.   1,430 ft.     b.   1,894 ft.     c.   2,302 ft.     d.   2,934 ft.     e.   3,486 ft.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT