Question
In: Physics
You have a (copper) rod that is 702 mm at 20 C, you also have an...
You have a (copper) rod that is 702 mm at 20 C, you also have an aluminum rod that has a length of 700 mm. When the rods are the same length, what is the temperature?
Solutions
Expert Solution
Consider the Copper rod
Original length(at 
), 
Initial temperature, 
Thermal expansion coefficient, 
Let 
be the final temperature where the length of the rods becomes
equal.
Use formula 
----------(1)
===========================================================
Consider the Aluminum rod
Original length(at
), 
Initial temperature,
Thermal expansion coefficient, 
Let
be the final temperature where the length of the rods becomes
equal.
Use formula
----------(2)
==================================================
From (1) and (2)
702-700=2
Rearrange the terms.
ANSWER: 
========================
genius_generous answered 11 months agoRelated Solutions
A copper rod is sliding on two conducting rails that make an angle of 20
A copper rod is sliding on two conducting rails
that make an angle of 20
At a certain temperature T1, a (1.8922x10^2) mm rod of a copper-nickel alloy has a resistivity...
At a certain temperature T1, a (1.8922x10^2) mm rod
of a copper-nickel alloy has a resistivity of (2.770x10^1) x
10-8 Ω-m. For pure copper, the resistivity at 0°C is
1.58 x 10-8 Ω-m and the change in resistivity per degree
increase in temperature is 6.50 x 10-11 (Ω-m)/°C. The
value of A for nickel in copper is 1.18 x 10-6 Ω-m and
the coefficient of thermal expansion of this alloy is (1.543x10^1)
x 10-6(°C)-1.
If the resistivity of this alloy...
At a certain temperature T1, a (1.2324x10^2) mm rod of a copper alloy containing (3.04x10^1) at%...
At a certain temperature T1, a (1.2324x10^2) mm rod
of a copper alloy containing (3.04x10^1) at% Ni has a resistivity
of (2.725x10^1) x 10-8 Ω-m.
For pure copper, the resistivity at 0°C is 1.58 x
10-8 Ω-m and the change in resistivity per degree
increase in temperature is 6.50 x 10-11 (Ω-m)/°C. The
value of A for nickel in copper is 1.18 x 10-6 Ω-m and
the coefficient of thermal expansion of this alloy is (1.6947x10^1)
x 10-6 (°C)-1.
If...
A steel drill rod that is 10 mm in diameter and 20 cm long is being...
A steel drill rod that is 10 mm in diameter and 20 cm long is
being heat treated in an oil bath. The 1050°C rod is quenched and
held at 700°C and then quenched a second time to 30°C. Calculate
the quantities of heat that must be removed at the two quenching
stages. Weight density of steel as ρw = 76 kN/m3 , The specific
heat of steel is c= 0.50 kJ/(kg . ºC).
You have 100 m of fine copper wire with a radius of 0.5 mm. Having only...
You have 100 m of fine copper wire with a radius of 0.5 mm.
Having only a 12 V power supply that can be treated as ideal, a
pencil, and a bag of long nails made from 99.8% pure iron (relative
magnetic permeability of 200) you need to make a magnet that would
produce a strong magnetic field.
A. What is the resistance of the 100 m of the
given copper wire? Assume the resistivity of copper to be ρ...
A length of 20-gauge copper wire (of diameter 0.8118 mm) is formed into a circular loop...
A length of 20-gauge copper wire (of diameter 0.8118 mm) is
formed into a circular loop with a radius of 24.0 cm. A magnetic
field perpendicular to the plane of the loop increases from zero to
18.0 mT in 0.20 s. Find the average electrical power dissipated in
the process.
To what temperature (in °C) must a cylindrical rod of one metal 10.045 mm in diameter...
To what temperature (in °C) must a cylindrical rod of one metal
10.045 mm in diameter and a plate of second metal having a circular
hole 9.990 mm in diameter have to be heated for the rod to just fit
into the hole? Assume that the initial temperature is 25°C and that
the linear expansion coefficient values for metals one and two are
4.9 x 10-6 (°C)-1 and 17 x 10-6
(°C)-1, respectively.
A solution is prepared that contains 10 mM NaCl, 20 mM CaCl2, 20 mM BaCl2, and...
A solution is prepared that contains 10 mM NaCl, 20 mM
CaCl2, 20 mM BaCl2, and 50 mM
NiNO3. Of course, all these salts completely dissolve to
their respective cations and anions. The pH is 7.0.
(a) Calculate the ionic strength of the solution.
(b) Calculate the activity coefficients for H+,
Cl-, and Ba2+ (use the Guntenberg
approximation because the solutions do, though note there are a few
other equations and a graph that can be used at your discretion...
At 130°C, a bronze hoop 20 mm thick whose inside diameter is 600 mm just fits...
At 130°C, a bronze hoop 20 mm thick whose inside diameter is
600 mm just fits snugly over a steel hoop 15 mm thick. Both hoops
are 100 mm wide. Compute the contact pressure between the hoops
when the temperature drops to 20°C. Neglect the possibility that
the inner ring may buckle. For steel, E = 200 GPa and α =
11.7μm/(m.°C). For bronze, E = 83 GPa α = 19 μm/(m.°C)
At 130°C, a bronze hoop 20 mm thick whose inside diameter is 600 mm just fits...
At
130°C, a bronze hoop 20 mm thick whose inside diameter is 600 mm
just fits snugly over a steel hoop 15 mm thick. Both hoops are 100
mm wide. Compute the contact pressure between the hoops when the
temperature drops to 20°C. Neglect the possibility that the inner
ring may buckle. For steel, E = 200 GPa and α = 11.7μm/(m.°C). For
bronze, E = 83 GPa α = 19 μm/(m.°C)
At
130°C, a bronze hoop 20 mm thick...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- You must evaluate a proposal to buy a new milling machine. The base price is $175,000,...
- “Triangle Guessing” game in Python The program accepts the lengths of three (3) sides of a...
- THIS PROGRAM HAS TO BE WRITTEN IN C Single function to perform the parity computation on...
- Consider a buffer system consisting of Benzoic acid (pKa = 4.20) and sodium benzoate, a) Would...
- Decision Variables S T Minimize 1.8S + 2.20T Subject to: Potassium 5S + 8T >= 200...
- A neurologist needs to counsel a stroke victim and her husband about possible outcomes, treatment options,...
- Case Study: Personal Beliefs in the Workplace Don Shakow was a prominent professional who worked in...
ADVERTISEMENT