A mixture of H2 and He are in a 10.0 L vessel at 273 K. The...

A mixture of H2 and He are in a 10.0 L vessel at 273 K. The total pressure is 756 torr. What is the partial pressure of H2 in the vessel if XHe = 0.75?

Expert Solution

thanks and hope you like the answer

queen_honey_blossom answered 4 months ago

A vessel contains a gaseous mixture of composition by volume 80% H2, and 20% CO.

A vessel contains a gaseous mixture of composition by volume 80% H2, and 20% CO. It is desired that the mixture should be made in the proportion 50% H2 and 50% CO by removing some of the mixture and adding some CO. Calculate, per kilomole of mixture, the mass of mixture to be removed and the mass of CO to be added. The pressure and temperature in the vessel remain constant during the process. Take the molar mass of H2...

1.23 moles of neon gas has a volume of 27.6 L at 273 K and 1.00...

1.23 moles of neon gas has a volume of 27.6 L at 273 K and 1.00 atm. What would be the volume of neon gas if the pressure were decreased to 10.1 psi at constant temperature? a) 2.73 L b) 19.0 L c) 0.0527 L d) 40.2 L e) 4.29 L

At 1177 K the partial pressures of an equilibrium mixture of H2O, H2 and O2 are...

At 1177 K the partial pressures of an equilibrium mixture of H2O, H2 and O2 are 0.0340, 0.0035 and 0.0013 atm, respectively. Given that the chemical equation for the equilibrium is, 2 H2O(g) <----> 2 H2(g) + O2(g) calculate Kp and Kc.

The following reaction was carried out in a 4.00 L reaction vessel at 1100 K: C(s)+H2O(g)⇌CO(g)+H2(g)...

The following reaction was carried out in a 4.00 L reaction vessel at 1100 K: C(s)+H2O(g)⇌CO(g)+H2(g) If during the course of the reaction, the vessel is found to contain 5.00 mol of C, 14.8 mol of H2O, 3.30 mol of CO, and 8.60 mol of H2, what is the reaction quotient Q? Enter the reaction quotient numerically.

Suppose we seal I2(g) and H2(g) in a vessel at T = 400 K with partial...

Suppose we seal I2(g) and H2(g) in a vessel at T = 400 K with partial pressures PI2 = 0.067 atm and PH2= 1.275 atm. At this temperature H2 and I2 do not react readily to form HI(g), although in principle if we waited long enough they would produce HI(g) at its equilibrium partial pressure. Instead of waiting for this to happen, we choose to heat the gases in the sealed flask to 600 K, where they readily react to...

A 1.500 L flask is filled with a mixture of 1.20 g H2 and 8.40 g...

A 1.500 L flask is filled with a mixture of 1.20 g H2 and 8.40 g O2, at 25°C. The mixture is ignited, and hydrogen and oxygen combine to form water. What is the total pressure inside the flask before the reaction? (Report your answer in units of atmospheres.) What is the total pressure after the reaction, once the flask is returned to 25°C? (Vapour pressure of water at 25°C is 23.8 mm Hg.)

A mixture of 0.750 mol H2 and 0.750 mol I2 was placed in a 1.00 L...

A mixture of 0.750 mol H2 and 0.750 mol I2 was placed in a 1.00 L flask at 430°C. The equilibrium constant Kc for the reaction is 54.3 at this temperature. Calculate the concentration of H2, I2, and HI at equilibrium. H2 + I2 ⇌ 2 HI

A mixture of CS2(g) and excess O2(g) is placed in a 10 L reaction vessel at...

A mixture of CS2(g) and excess O2(g) is placed in a 10 L reaction vessel at 100.0 ∘C and a pressure of 3.10 atm . A spark causes the CS2 to ignite, burning it completely, according to the equation: CS2(g)+3O2(g)→CO2(g)+2SO2(g) After reaction, the temperature returns to 100.0 ∘C, and the mixture of product gases (CO2, SO2, and unreacted O2) is found to have a pressure of 2.50 atm . What is the partial pressure of each gas in the product...

A mixture of CS2(g) and excess O2(g) is placed in a 10 L reaction vessel at...

A mixture of CS2(g) and excess O2(g) is placed in a 10 L reaction vessel at 100.0 ∘C and a pressure of 3.10 atm . A spark causes the CS2 to ignite, burning it completely, according to the equation: CS2(g)+3O2(g)→CO2(g)+2SO2(g) After reaction, the temperature returns to 100.0 ∘C, and the mixture of product gases (CO2, SO2, and unreacted O2) is found to have a pressure of 2.50 atm . What is the partial pressure of each gas in the product...

A rigid 10-L vessel initially contains a mixture of liquid water and vapor at 100C with...

A rigid 10-L vessel initially contains a mixture of liquid water and vapor at 100C with 12.3 percent quality. The mixture is then heated until its temperature is 180C. Calculate the heat transfer required for this process.

Question

A mixture of H2 and He are in a 10.0 L vessel at 273 K. The...

Solutions

Expert Solution

Related Solutions

A vessel contains a gaseous mixture of composition by volume 80% H2, and 20% CO.

1.23 moles of neon gas has a volume of 27.6 L at 273 K and 1.00...

At 1177 K the partial pressures of an equilibrium mixture of H2O, H2 and O2 are...

The following reaction was carried out in a 4.00 L reaction vessel at 1100 K: C(s)+H2O(g)⇌CO(g)+H2(g)...

Suppose we seal I2(g) and H2(g) in a vessel at T = 400 K with partial...

A 1.500 L flask is filled with a mixture of 1.20 g H2 and 8.40 g...

A mixture of 0.750 mol H2 and 0.750 mol I2 was placed in a 1.00 L...

A mixture of CS2(g) and excess O2(g) is placed in a 10 L reaction vessel at...

A mixture of CS2(g) and excess O2(g) is placed in a 10 L reaction vessel at...

A rigid 10-L vessel initially contains a mixture of liquid water and vapor at 100C with...