In a Porter governor, the mass of the central load is 18 kg and the mass...

In a Porter governor, the mass of the central load is 18 kg and the mass of each ball is 2 kg. The top
arms are 250 mm while the bottom arms are each 300 mm long. The friction of the sleeve is 14 N. If
the top arms make 45° with the axis of rotation in the equilibrium position, find the range of speed of
the governor in that position.

Solutions

Expert Solution

In this question use the correlation of porter governor to find the range of speed

the range of speed of the governor in that position = 14.82 rpm

samet mamat answered 1 year ago

Next > < Previous

Related Solutions

In a porter governor, the upper and lower arms are each 220m long, and aare each...

In a porter governor, the upper and lower arms are each 220m long, and aare each inclined at 30degrees to the vertical when the sleeve is in its lowest position. the points of suspension are each 40 mm from the axis of the spindle. The mass of each of the three rotating balls is 3kg and that of the central load on the sleeve is 30kg. if the movement of the sleeve is 36 mm, find the range of speed...

A copper block of mass 6.8 kg is originally at a temperature of 18°C and 1...

A copper block of mass 6.8 kg is originally at a temperature of 18°C and 1 atm. It is then heated to a temperature of 69°C without any change in pressure. The specific heat of copper is 387 J/(kg · °C), its density is 8.94 103 kg/m3, and the coefficient of linear expansion is 17 ✕ 10 −6 /°C. (a) Determine the work done by the copper block. J (b) How much heat energy is transferred during this process? J...

You are Governor of the Central Banks of Wakanda (fictionalcountry…). Your country is small in...

You are Governor of the Central Banks of Wakanda (fictional country…). Your country is small in size, geographically located close to China, relies heavily on imports but you have your own currency. It is 2020 and you have decide whether to raise, lower or keep interest rates at current levels. What are some of your key considerations and why?

A body of mass 7 kg is projected vertically upward with an initial velocity 18 meters...

A body of mass 7 kg is projected vertically upward with an initial velocity 18 meters per second. The gravitational constant is g=98m/s2. The air resistance is equal to k|v| where k is a constant. Find a formula for the velocity at any time ( in terms of k ): Find the limit of this velocity for a fixed time t0 as the air resistance coefficient k goes to 0.

In the figure below, a solid cylinder of radius 18 cm and mass 12 kg startsfrom...

In the figure below, a solid cylinder of radius 18 cm and mass 12 kg startsfrom rest and rolls without slipping a distance L = 7.9 mdown a roof that is inclined at angle ? = 29

the mass of block A is 80 kg, the mass of block b is 20 kg,...

the mass of block A is 80 kg, the mass of block b is 20 kg, and A is connected to B with the cable and pulley system shown. the pulleys rotate freely, and the cable and pulleys have negligible mass. the coefficient of static fricion between A and the horizontal surface is Ms=0.4, and the coefficient of kinetic friction is Mk=0.3. a) initially, block A is being held stationary and the system is at rest in static equilibrium ....

A block of mass 2 kg and a block of mass 3 kg are sliding on...

A block of mass 2 kg and a block of mass 3 kg are sliding on a frictionless surface. They collide and stick together. Before the collision the first block was travelling at 5 m/s in the positive x direction. After the collision the two blocks are travelling at 6 m/s in the negative x direction. What was the x component of the velocity of the second block before the collision?

Blocks A (mass 2.00 kg ) and B (mass 12.00 kg , to the right of...

Blocks A (mass 2.00 kg ) and B (mass 12.00 kg , to the right of A) move on a frictionless, horizontal surface. Initially, block B is moving to the left at 0.500 m/s and block A is moving to the right at 2.00 m/s. The blocks are equipped with ideal spring bumpers. The collision is headon, so all motion before and after it is along a straight line. Let +x be the direction of the initial motion of A....

QUESTION 14 A chimney (length 18 m, mass 980 kg] cracks at the base and topples. Assume:...

QUESTION 14 A chimney (length 18 m, mass 980 kg] cracks at the base and topples. Assume: - the chimney behaves like a thin rod, and does not break apart as it falls. - only gravity (no friction) acts on the chimney as it falls. - the bottom of the chimney pivots, but does not move. Find the linear speed of the very top of the chimney, in m/s, just as it hits the ground. QUESTION 15 A 23 kg cart...

You (mass 81 kg) and your friend (mass unknown) are in a rowboat (mass 65 kg)...

You (mass 81 kg) and your friend (mass unknown) are in a rowboat (mass 65 kg) on a calm lake. You are at the center of the boat rowing and she is at the back, 2 m from the center. You get tired and stop rowing. She offers to row and after the boat comes to rest, you change places. You notice that after changing places the boat has moved 20 cm relative to a fixed log. What is your...

Subjects