Question 1-A) in a horizontal terrain, the width is about 100 m., length 300 m. a...

Question 1-A) in a horizontal terrain, the width is about 100 m., length 300 m. a rectangular "hospital building" is planned to be constructed urgently. Considering the floor and floor of the hospital building which will be constructed of reinforced concrete or steel construction and designed to be single storey, write down all the work required to be done in the ground survey of this area and its surroundings in order and in complete terms of geotechnical.

b) in this geotechnical evaluation, interpret your thoughts about whether 1 basement should be added or not to the "hospital building", which is intended to be built on a single storey, together with the reasons.

Expert Solution

Please do give positive rating,thankyou.

Ally Wells answered 11 months ago

A) A plastic block that has a length of 0.5 m, a width of 0.26 m,...

A) A plastic block that has a length of 0.5 m, a width of 0.26 m, and a height of 0.33 m, and has a density of 670 kg/m3 floats in both water and oil. If the plastic block is floating at the surface of a tank of water (which has a density of 1000 kg/m3), what is the distance from the top of the block to the surface of the water?If the plastic block is floating at the surface...

Suppose a 1-m length of aluminum wire 0.001 m in diameter is held in a horizontal...

Suppose a 1-m length of aluminum wire 0.001 m in diameter is held in a horizontal east-west position (in vertical equilibrium) by an external magnetic eld directed north of strength 1 G = 10-4 T. The density aluminum = 2:70 103 kg/m3 and the resistivity aluminum = 2:65 10?8 m. Also note the volume of a cylinder is Vcyl = r2h. (a) Find the resistance RAl of the aluminum wire. (b) Find the volume VAl of the aluminum wire. (c)...

A parabolic trough concentrator with width of 3 m and length of 25 m has an...

A parabolic trough concentrator with width of 3 m and length of 25 m has an absorbed solar radiation per unit area of aperture (S) of 600 W/m2. The receiver is a cylinder with an emittance of 0.3 and is surrounded by an evaluated glass cylindrical envelope. The absorber has a diameter of 50 mm and the transparent envelope has an outer diameter of 100 mm with a thickness of 5 mm. The collector is designed to heat a fluid...

A large boat with 91.44 m in length and 42.672 m in width is carrying 1,360,777.11...

A large boat with 91.44 m in length and 42.672 m in width is carrying 1,360,777.11 kg of coal along the river with a 2.7432m draft (the height from waterline to bottom of the boat). What is the draft and weight of the boat when the boat is empty (no coal)? What is the draft and weight of the boat if the boat hits a wave and looses 10 tons of coal? Treat the boat as a rectangular cylinder. Use...

C++ Question: write a program that prompts the user for the length and width of a...

C++ Question: write a program that prompts the user for the length and width of a rectangle in inches. The program then uses functions to compute the perimeter and area of the rectangle and to convert those to meters and square meters respectively. Sample output from one instance of the program is shown below: ```html Welcome to the Foot-To-Meter Rectangle Calculator ================================================= Enter the rectangle length in feet: 2 Enter the rectangle width in feet: 3 The rectangle dimensions are: 0.61...

The mattress of a water bed has a length of 2.00 m, a width of 2.00...

The mattress of a water bed has a length of 2.00 m, a width of 2.00 m and a depth of 30.0 cm. Find the weight of the water on the mattress and find the pressure exerted by the water on the floor when the bed is in its normal position. Assume that the entire lower part of the bed makes contact with the floor. 1.If the bed were replaced by another that has a weight of 300 lbs and...

A box has dimensions of 1.8 m length (y-direction), 1.8 m width (x- direction), and 3.6...

A box has dimensions of 1.8 m length (y-direction), 1.8 m width (x- direction), and 3.6 m height (z-direction). With the head of a vector at the front, bottom, left-hand corner of the box , and the tail of the vector at the back, top, right-hand corner of the box (at the origin); give the vector in Cartesian form, magnitude/direction angles representation, and the unit vector.

reveals a longitudinal section of a circular tube with a length of l = 300 m....

reveals a longitudinal section of a circular tube with a length of l = 300 m. Additionally, the absolute roughness of the boundary, the diameter of the circular tube, the continuous loss over the whole length and the kinematic viscosity of the real fluid are given. Longitudinal section of a steel tube Given l = 300 m k = 1 mm d = 1.00 m hLoss, continuous = 0.50 m ν = 1.3 * 10-6 m2 /s For a similar...

A horizontal beam of length 4.07 m and weight 150 N is attached to a vertical...

A horizontal beam of length 4.07 m and weight 150 N is attached to a vertical wall at a right angle. There is also a support wire of length 5.01 m which attaches the far end of the beam to the wall from above. Off of the far end of the beam also hangs an object of weight 290 N. A) What is the magnitude of the tension in the support wire? B) What is the horizontal component of the...

A uniform stick, mass m and length l, is placed in a horizontal plane by hanging...

A uniform stick, mass m and length l, is placed in a horizontal plane by hanging it from a massless string attached to the center. A ball of mass M moving with speed V in the plane of the stick. The ball strikes the stick at a distance d from the center. the collision is elastic. Find the resulting translational and rotational speeds of the stick and the resulting speed of the ball. show that the relative speed of the...

Question