Question

In: Physics

The mattress of a water bed has a length of 2.00 m, a width of 2.00...

The mattress of a water bed has a length of 2.00 m, a width of 2.00 m and a depth of 30.0 cm. Find the weight of the water on the mattress and find the pressure exerted by the water on the floor when the bed is in its normal position. Assume that the entire lower part of the bed makes contact with the floor.

1.If the bed were replaced by another that has a weight of 300 lbs and is supported by the four legs that have a diameter of 2.00 cm. What pressure does the bed exert on the surface?

a.5.00 x 105 Pa
b.4.5 x 105 Pa
c.6.0 x 104 Pa
d.2.7 x 105 Pa

2.The fluid presented in the exercise is a fluid:

a.Turbulent
b.Laminate
c.Incompressible
d.Viscous

Solutions

Expert Solution

genius_generous answered 1 year ago
Next > < Previous

Related Solutions

A) A plastic block that has a length of 0.5 m, a width of 0.26 m,...
A) A plastic block that has a length of 0.5 m, a width of 0.26 m, and a height of 0.33 m, and has a density of 670 kg/m3 floats in both water and oil. If the plastic block is floating at the surface of a tank of water (which has a density of 1000 kg/m3), what is the distance from the top of the block to the surface of the water?If the plastic block is floating at the surface...
A parabolic trough concentrator with width of 3 m and length of 25 m has an...
A parabolic trough concentrator with width of 3 m and length of 25 m has an absorbed solar radiation per unit area of aperture (S) of 600 W/m2. The receiver is a cylinder with an emittance of 0.3 and is surrounded by an evaluated glass cylindrical envelope. The absorber has a diameter of 50 mm and the transparent envelope has an outer diameter of 100 mm with a thickness of 5 mm. The collector is designed to heat a fluid...
A simple pendulum has a mass of 0.550 kg and a length of 2.00 m. It...
A simple pendulum has a mass of 0.550 kg and a length of 2.00 m. It is displaced through an angle of 11.0
Specifications for a piece of material used in the manufacture of a bed mattress require that...
Specifications for a piece of material used in the manufacture of a bed mattress require that the piece be between a Lower and Upper value (in inches) centered around the process mean. The process that produces the piece yields a mean of 52 and a standard deviation of 0.7 inches. The distribution of output is normal. Within what values will 85.2 percent of sample means fall, if samples of n = 13 are taken and the process is in control?...
Specifications for a piece of material used in the manufacture of a bed mattress require that...
Specifications for a piece of material used in the manufacture of a bed mattress require that the piece be between a Lower and Upper value (in inches) centered around the process mean. The process that produces the piece yields a mean of 49 and a standard deviation of 1 inches. The distribution of output is normal. Within what values will 91.83 percent of sample means fall, if samples of n = 8 are taken and the process is in control?...
Specifications for a piece of material used in the manufacture of a bed mattress require that...
Specifications for a piece of material used in the manufacture of a bed mattress require that the piece be between a Lower and Upper value (in inches) centered around the process mean. The process that produces the piece yields a mean of 25 and a standard deviation of 0.6 inches. The distribution of output is normal. Within what values will 94.87 percent of sample means fall, if samples of n = 10 are taken and the process is in control?...
A large boat with 91.44 m in length and 42.672 m in width is carrying 1,360,777.11...
A large boat with 91.44 m in length and 42.672 m in width is carrying 1,360,777.11 kg of coal along the river with a 2.7432m draft (the height from waterline to bottom of the boat). What is the draft and weight of the boat when the boat is empty (no coal)? What is the draft and weight of the boat if the boat hits a wave and looses 10 tons of coal? Treat the boat as a rectangular cylinder. Use...
A box has dimensions of 1.8 m length (y-direction), 1.8 m width (x- direction), and 3.6...
A box has dimensions of 1.8 m length (y-direction), 1.8 m width (x- direction), and 3.6 m height (z-direction). With the head of a vector at the front, bottom, left-hand corner of the box , and the tail of the vector at the back, top, right-hand corner of the box (at the origin); give the vector in Cartesian form, magnitude/direction angles representation, and the unit vector.
A rectangle has a length of 10 inches and a width of 6 inches. If the length is increased by x inches and the width increased
For the following exercises, use the written statements to construct a polynomial function that represents the required information.A rectangle has a length of 10 inches and a width of 6 inches. If the length is increased by x inches and the width increased by twice that amount, express the area of the rectangle as a function of x.  
Question 1-A) in a horizontal terrain, the width is about 100 m., length 300 m. a...
Question 1-A) in a horizontal terrain, the width is about 100 m., length 300 m. a rectangular "hospital building" is planned to be constructed urgently. Considering the floor and floor of the hospital building which will be constructed of reinforced concrete or steel construction and designed to be single storey, write down all the work required to be done in the ground survey of this area and its surroundings in order and in complete terms of geotechnical. b) in this...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT