Question

In: Civil Engineering

Determine the removal efficiency of a “standard” cyclone that is being designed to remove 10 µm...

Determine the removal efficiency of a “standard” cyclone that is being designed to remove 10 µm diameter particles with a density of 800 kg/m3 , using the following design specifications: • Cyclone barrel diameter = 0.50 m • Gas flow rate = 4.0 m3 /sec • Gas temperature = 25°C

Ans. 94.4%

Solutions

Expert Solution

Ally Wells answered 11 months ago
Next > < Previous

Related Solutions

A standard electric motor is rated at 10 horsepower (HP) and costs $800. Its fullload efficiency...
A standard electric motor is rated at 10 horsepower (HP) and costs $800. Its fullload efficiency is specified to be 87%. A newly designed, high efficiency motor of the same size has an efficiency of 93%, but costs $1,200. It is estimated that the motors will operate at a rated 10-HP output for 2,500 hours a year, and the cost of energy will be $0.07 per kilowatt-hour. Each motor is expected to have 12-year life. At the end of 12...
A standard electric motor is rated at 10 horsepower (HP) and costs $800. Its fullload efficiency...
A standard electric motor is rated at 10 horsepower (HP) and costs $800. Its fullload efficiency is specified to be 92%. A newly designed, high efficiency motor of the same size has an efficiency of 95%, but costs $1,200. It is estimated that the motors will operate at a rated 10-HP output for 2,000 hours a year, and the cost of energy will be $0.07 per kilowatt-hour. Each motor is expected to have 12-year life. At the end of 12...
You have been hired to determine whether the fuel efficiency of your vehicle exceeds 10 L/100...
You have been hired to determine whether the fuel efficiency of your vehicle exceeds 10 L/100 km.To do this you collect 30 measurements of your vehicle's fuel efficiency at random. These data are approximately normally distributed, with mean of 11 L/100 km. and a standard deviation of 3 L/km. 1) what type of statistical hypothesis test would you use to test this assertion? 2) Use the 6-step procedure demonstrated in cass to test the assertion that the fuel efficiency is...
10. Determine the direction in which the spontaneous reaction occurs from the following standard reduction potentials....
10. Determine the direction in which the spontaneous reaction occurs from the following standard reduction potentials. Indicate the reaction that is occurring at the anode, the cathode, the cell potential and the net ionic reaction. Sn^4+ (ac) + 2e ----> Sn^2+ (ac)   E = 0.15V Fe^3+ (ac) + 1e ----> Fe^2+ (ac) E = 0.77V
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT