Question
In: Other
200 SCMH of dry CO2 is bubbled through a vessel that contains liquid acetone. The gas...
200 SCMH of dry CO2 is bubbled through a vessel that contains liquid acetone. The gas leaves the vessel with a relative saturation of 90% at 320 K. All process streams can be assumed to be at1 atm. Calculate: a) the dew point temperature of the exiting gas. b) the mole fraction of acetone in the exiting gas. c) the rate at which acetone is stripped from the liquid phase (molar flow rate). d) the actual volumetric flow rate of the exiting gas. e) the temperature to which the gas would have to be cooled to condense 95% of the acetone in the gas stream
Solutions
Expert Solution
DEAR STUDENT, ANSWERS MAY
DIFFER SLIGHTLY DUE TO DIFFERENT DEFINITIONS OF STANDARD CONDITIONS
AND DIFFERENT VALUES OF ANTOINE COEFFICIENTS.
DEAR STUDENT, IF YOU HAVE ANY QUERY PLEASE ASK ME. I SHALL DEFINITELY HELP YOU IN RESOLVING YOUR QUERY. PLEASE ASK ME. THANK YOU.
Amanda K answered 2 years agoRelated Solutions
Nitrogen is bubbled through a liquid mixture that contains initially equimolar amounts of benzene (B) and...
Nitrogen is bubbled through a liquid mixture that contains
initially equimolar amounts of benzene (B) and toluene (T). The
system pressure is 3atm and the temperature is 80 degrees Celsius.
The nitrogen flow rate is 10 standard liters per second. The gas
leaving the bubbler is saturated with B and T vapors.
(a) Estimate the initial rated (in mol/min) at which B and T
leave the bubbler.
(b) How will the mole fraction of B and T in the liquid...
Nitrogen is bubbled through a liquid mixture that contains initially equimolar amounts of benzene (B) and...
Nitrogen is bubbled through a liquid mixture that contains
initially equimolar amounts of benzene (B) and toluene (T). The
system pressure is 3 atm and the temperature is 80C. The nitrogen
flow rate is 10.0 standard liters per second. The gas leaving the
bubbler is saturated with B and T vapors.
a) Estimate the initial rates (in mol/min) at which B and T
leave the bubbler.
b) How will the mole fractions of B and T in the liquid change...
If ethane, CH3CH3, a gas, is bubbled into methanol, CH3OH, a liquid, it is logical to...
If ethane, CH3CH3, a gas, is bubbled into
methanol, CH3OH, a liquid, it is logical to expect that
this gas ...
will dissolve in the methanol because of similar intermolecular
attractions.
will dissolve in the methanol because their molar masses are so
close.
will dissolve in the methanol because both molecules are
polar.
will not dissolve in the methanol because one molecule exhibits
hydrogen bonding and the other does not.
will not dissolve in the methanol because their molar masses...
200 MMscfd natural gas that contains 20vol% CO2 and no H2S is to be transported 60...
200 MMscfd natural gas that contains 20vol% CO2 and no H2S is to
be transported 60 miles through pipelines to a natural gas
liquefaction plant where gas sweetening and dehydration will take
place. Suggest:
Minimum specifications for the gas as it enters the
pipeline.
Suitable processing sequence for the field facility.
A vessel contains a mixture of equimolar liquid benzene and liquid toluene that is in equilibrium...
A vessel contains a mixture of equimolar liquid benzene and
liquid toluene that is in equilibrium with their vapors and air.
The temperature of the mixture is 40 degrees celsius. The mole
fraction of air in the vapor phase is .6 or 60%. What is the total
pressure and the mole fraction of benzene in the vapor phase?
Dry air is bubbled through 25.0 liters of water at a rate of 15 L (STP)...
Dry air is bubbled through 25.0 liters of water at a rate of 15
L (STP) / Min. The air leaving the liquid is saturated with water
at 25 C and 1.5 atm. How long will it take for all the water to
vaporize ? answer: 67.8 days
Calculate the temperature T of 40 kg of CO2 gas in a 500 liter vessel at...
Calculate the temperature T of 40 kg of CO2 gas in a 500 liter
vessel at 5 MPa. The critical pressure of CO2 is 7.39 MPa and the
critical temperature is 31.05 ºC: also, specify the value of Z.
calculate the equilibrium pressure of CO2 in a closed 1 L vessel that contains each of...
calculate the equilibrium pressure of CO2 in a closed 1 L vessel
that contains each of the following samples. Assume that ΔH∘ and
ΔS∘ are independent of temperature:
15 g of MgCO3 and 1.0 g of MgO at 25 ∘C
15 g of MgCO3 and 1.0 g of MgO at -40 ∘C
30 g of MgCO3 and 1.0 g of MgO at -40 ∘C
When 5.00 g of acetone (C3H6O) burns in air, carbon dioxide gas and liquid water are...
When 5.00 g of acetone (C3H6O) burns in air, carbon dioxide gas
and liquid water are formed. Enough heat is liberated to increase
the temperature of 1.000 kg of water from 25.0◦C to 61.8◦C. The
specific heat of water is 4.18 J/g-◦C
1. How many kJ of heat are liberated by the combustion
described?
2. How many grams of acetone must be burned to liberate 5.00
kJ?
3. Write the thermochemical equation for the combustion of
acetone.
4. What is...
A rigid 10-L vessel initially contains a mixture of liquid water and vapor at 100C with...
A rigid 10-L vessel initially contains a mixture of liquid water
and vapor at 100C with 12.3 percent quality. The mixture is then
heated until its temperature is 180C. Calculate the heat transfer
required for this process.
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- (All figures in thousands) The Accessories Outlet has total equity of $286,000 sales of $508,000, and...
- Create a program that asks the user to input three numbers and computes their sum. This...
- 1. Evaluate how some of the tried-and-true strategies for merging companies will get the job done....
- Discuss and gather insight and feedback on the importance of data models and how to discover...
- . An investor can design a risky portfolio based on two stocks, A and B. Stock...
- 1.Instead of Build-Max-Heap, we could use Heap-Insert-Max to build a tree with heap property. Write a...
- explain why using email address as the primary key for Staff is a bad idea
ADVERTISEMENT