1000 MW coal-fired power plant emits SO2 at the legally allowed limit of 6.47 x 108...

1000 MW coal-fired power plant emits SO2 at the legally
allowed limit of 6.47 x 108 g/sec (equivalent to 0.6 lb per 106 BTU).
The stack has an effective height of 300 m. It is a cloudy summer
day and the wind speed at 10-m is measured at 2.5 m/sec. What
is the ground level concentration of SO2 4 km directly downwind.
Assume a value for “p” of 0.25.EnvEng

please help me solve! thanks!

Expert Solution

Ally Wells answered 1 year ago

Consider a coal-fired steam power plant that produces 175 MW of electric power. The power plant...

Consider a coal-fired steam power plant that produces 175 MW of electric power. The power plant operates on a simple ideal Rankine cycle with turbine inlet conditions of 7 MPa and 550°C and a condenser pressure of 15 kPa. The coal has a heating value (energy released when the fuel is burned) of 29,300 kJ/kg. Assuming that 75% of this energy is transferred to the steam in the boiler and that the pump has an efficiency of 80% and the...

A 600 MW pulverized coal-fired power plant of 40% efficiency uses coal with an ash content...

A 600 MW pulverized coal-fired power plant of 40% efficiency uses coal with an ash content of 15% and a heating value of 26,700 kJ/kg. Assume 35% of the ash content goes up the stack as particulate matter in the flue gas. The PM emission is controlled by an ESP which has the following efficiencies and weight distribution in the given size ranges. Find the fly ash emitted in g/s.

How to calculate theoritical NOx and SO2 (mg/Nm3) in gases at coal fired power plant, if...

How to calculate theoritical NOx and SO2 (mg/Nm3) in gases at coal fired power plant, if known : Coal Calorific Value = 4500 kcal/kg Fuel consumption = 180 t/h Excess air = 18% Oxygen in exhaust gases = 5% Flue Gas Temperature in exhaust gases = 135 deg C Carbon Content = 30.110 Hydrogen Content = 3.610 Oxygen Content = 9.850 Sulfur Content = 0.330 Nitrogen Content = 0.700 Ash Content = 5.740 Moisture Content = 32.530 Thank you!

8. A coal plant emits 0.40% SO2 by volume at a temperature of 145oC and 101.3...

8. A coal plant emits 0.40% SO2 by volume at a temperature of 145oC and 101.3 kPa from the stack. The total volume of gas emitted is 2.5 x104 m3/min. How many m3 of SO2 are emitted per minute at these conditions? How many moles of SO2 are emitted per minute at these conditions? How many kgs of SO2 are emitted per minute at these conditions? How many kgs of SO2 are emitted per minute at 25oC?

A coal-fired power plant produces power with costs . Each unit of power earns the plant ....

A coal-fired power plant produces power with costs . Each unit of power earns the plant . Burning coal releases particulate matter (PM2.5), a pollutant that is known to cause heart disease, lung disease, and birth defects. The coal plant borders a wildlife sanctuary which sells tourism visits for a price $30. However, the sanctuary's animals are getting sick due to the negative externality of PM2.5, such that the costs to the sanctuary are . The local government decides to tax the...

At a coal-fired power plant, assume that lignite coal is being burned as shown in the...

At a coal-fired power plant, assume that lignite coal is being burned as shown in the following stoichiometric combustion reaction equation, which assumes that the nitrogen in the lignite and in the air is all converted to NO and that combustion is complete: CH0.96O0.18N0.016S0.012 + x (O2 + 3.78 N2) → CO2 + 0.48 H2O + 0.016 NO + 0.012 SO2 + 3.78x N2 (a) What is the value of the coefficient, x? (b) To ensure complete combustion, air must...

Consider a 400-MW, 32 percent efficient coal-fired power plant that uses cooling water withdrawn from a...

Consider a 400-MW, 32 percent efficient coal-fired power plant that uses cooling water withdrawn from a nearby river (with an upstream flow of 10-m3/s and temperature 20 °C) to take care of waste heat. The heat content of the coal is 8,000 Btu/lb, the carbon content is 60% by mass, and the sulfur content is 2% by mass. How much electricity (in kWh/yr) would the plant produce each year? How many pounds per hour of coal would need to be...

Assume you have a coal fired plant that produces 300 MW. The plant is 30% efficient....

Assume you have a coal fired plant that produces 300 MW. The plant is 30% efficient. There is 0.2 lbs. of sulfur produced per BTU. There is 5% residual ash created. Assume you live 4km downstream to the plant. Its is a cloudy summer night with wind of 2.5 m/s. The effective stack height is 100m What is the feed rate of coal to the plant (lbs. per hour)? How much sulfur is produced per hour? What is the concentration...

If a coal-fired power plant burns 2 kg of coal to produce electricity, and the electricity...

If a coal-fired power plant burns 2 kg of coal to produce electricity, and the electricity is used to power an elevator motor that is 60% efficient, how high can the elevator and passengers be lifted up if their total mess is 1500 kg? and then How many human workers using muscle power('energy servants") would be needed to lift the elevator up to the same height, if they had one minute to do so? Assuming that one energy servant is...

1. Consider a 400-MW, 32 percent efficient coal-fired power plant that uses cooling water withdrawn from...

1. Consider a 400-MW, 32 percent efficient coal-fired power plant that uses cooling water withdrawn from a nearby river (with an upstream flow of 10-m3/s and temperature 20 °C) to take care of waste heat. The heat content of the coal is 8,000 Btu/lb, the carbon content is 60% by mass, and the sulfur content is 2% by mass. v. If the cooling water is only allowed to rise in temperature by 10 °C, what flow rate (in m3/s) from...

Question