Consider the assembly line of a laptop computer. The line consists of 10 stations and operates...

Consider the assembly line of a laptop computer. The line consists of 10 stations and operates at a cycle time of 2 minutes/unit. Their most error-prone operation is step 2. There is no inventory between the stations because this is a machine-paced line. Final inspection happens at station 10. What would be the information turnaround time for a defect made at station 2?

Expert Solution

Cycle time of whole line $=2$ minutes/ unit

This means that one unit is made in 2 minutes. In the line of 10 stations the $2^{\text {nd }}$ step is the most error prone.

Error made at step 2 means that unit must be processed by 8 other stations in order to be made and inspected at $10^{\text {th }}$ station.

Thus, Information turnaround time $=$ cycle time $\times$ number of stations after error is made $=2 \times 8$

$=\mathbf{1 6}$ minutes

Amanda K answered 2 years ago

Crazy Computer Store sells a back-to-school bundle that consists of a laptop computer, printer, and tablet...

Crazy Computer Store sells a back-to-school bundle that consists of a laptop computer, printer, and tablet to a customer for $2,400. Crazy Computer also sells the products on a stand-alone basis for the following amounts: the laptop for $1,800, the printer for $350, and the tablet for $500. The customer receives a $250 discount for buying the three products as a bundle. Crazy Computer normally sells the laptop and printer as a package for a price of $1,900. The tablet...

C&A uses an assembly line of 20 stations to make a product. The cycle time is...

C&A uses an assembly line of 20 stations to make a product. The cycle time is 5 minutes per unit. Step 6 is the most error-prone operation. Inspection occurs at the last station. What will be the information turnaround time for a defect made at station 6 if there is no inventory between stations? 0.2 minute 5 minutes 70 minutes 100 minutes

Assume that Ernesto purchased a laptop computer on July 10 of year 1 for $3,000. In...

Assume that Ernesto purchased a laptop computer on July 10 of year 1 for $3,000. In year 1, 80 percent of his computer usage was for his business and 20 percent was for computer gaming with his friends. This was the only asset he placed in service during year 1. Ignoring any potential §179 expense and bonus depreciation, answer the questions for each of the following alternative scenarios: (Use MACRS Table 1, Table 2.) (Do not round intermediate calculations. Round...

Consider a production line with five stations. Station 1 can produce a unit in 9 minutes....

Consider a production line with five stations. Station 1 can produce a unit in 9 minutes. Station 2 can produce a unit in 10 minutes. Station 3 has two identical machines, each of which can process a unit in 12 minutes (each unit only needs to be processed on one of the two machines. Station 4 can produce a unit in 5 minutes. Station 5 can produce a unit in 8 minutes. Which station is the bottleneck station?

An undergraduate business student has purchased a laptop computer for use during exams. This laptop is...

An undergraduate business student has purchased a laptop computer for use during exams. This laptop is perfectly reliable except for two parts: its microchip, which has a failure rate of one in every twenty hours of operation; and its battery, which has a failure rate of one in every ten hours of operation. Also, on average the battery will wear out in five hours, with a standard deviation of 30 minutes. Assuming that a new battery has just been installed,...

2. Battery Level of Laptop Computers in Shipment A computer manufacturer ships laptop computers with the...

2. Battery Level of Laptop Computers in Shipment A computer manufacturer ships laptop computers with the batteries fully charged so that customers can begin to use their purchases right out of the box. In its last model, 85% of customers received fully charged batteries. To simulate arrivals, the company shipped 100 new model laptops (randomly picked from their warehouse) to various company sites around the country. Of 100 laptops shipped, 96 of them arrived reading 100% charged. Do the data...

The company is considering a new assembly line to replace the existing assembly line. The existing...

The company is considering a new assembly line to replace the existing assembly line. The existing assembly line was installed 3 years ago at a cost of $90,000; it was being depreciated under the straight-line method. The existing assembly line is expected to have a usable life of 6 more years. The new assembly line costs $120,000; requires $9,000 in installation costs and $5,000 in training fees; it has a 6-year usable life and would be depreciated under the straight-line...

Macon Company is considering a new assembly line to replace the existing assembly line.

Macon Company is considering a new assembly line to replace the existing assembly line. The existing assembly line was installed 3 years ago at a cost of $90,000; it was being depreciated under the straight-line method. The existing assembly line is expected to have a usable life of 6 more years. The new assembly line costs $120,000; requires $9,000 in installation costs and $5,000 in training fees; it has a 6-year usable life and would be depreciated under the...

1. Identify 7-10 primary functions of a common laptop computer. 2. Identify 7-10 primary parts/components of...

1. Identify 7-10 primary functions of a common laptop computer. 2. Identify 7-10 primary parts/components of a common laptop computer. 3. Allocate the functions in (a) to the parts/components in (b). this is related to systems engineering

Macon Company is considering a new assembly line to replace the existing assembly line. The existing...

Macon Company is considering a new assembly line to replace the existing assembly line. The existing assembly line was installed 3 years ago at a cost of $90,000; it was being depreciated under the straight-line method. The existing assembly line is expected to have a usable life of 6 more years. The new assembly line costs $120,000; requires $9,000 in installation costs and $5,000 in training fees; it has a 6-year usable life and would be depreciated under the straight-line...

Question