Acetic acid (molecular weight = 60.05 g/mol) and sodium acetate (molecular weight = 82.03 g/mol) can...

Acetic acid (molecular weight = 60.05 g/mol) and sodium acetate (molecular weight = 82.03 g/mol) can form a buffer with an acidic pH. In a 500.0 mL volumetric flask, the following components were added together and mixed well, and then diluted to the 500.0 mL mark: 100.0 mL of 0.300 M acetic acid, 1.00 g of sodium acetate, and 0.16 g of solid NaOH (molecular weight = 40.00 g/mol).
What is the final pH? The Ka value for acetic acid is 1.8 x 10^-5

(Hint: what isthe key concept related to the coefficients in balanced chemical reactions?)

Solutions

Expert Solution

I have given the answer in three significant figures....if the answer does not match due to significant figures then please comment below.....

queen_honey_blossom answered 1 year ago

Next > < Previous

Related Solutions

An acetic acid-sodium acetate buffer can be prepared by adding sodium acetate to HCl(aq). a) Write...

An acetic acid-sodium acetate buffer can be prepared by adding sodium acetate to HCl(aq). a) Write an equation for the reaction that occurs when sodium acetate is added to HCl(aq) b) If 10.0g of CH3COON is added to 275 mL of 0.225 M HCl(aq), what is the pH of the resulting buffer? c) What is the pH of the solution in part b after the addition of 1.26g of solid NaOH?

An acetic acid/ sodium acetate buffer solution was prepared using the following components: 3.46 g of...

An acetic acid/ sodium acetate buffer solution was prepared using the following components: 3.46 g of NaC2H3O2∙3H2O (FW. 136 g/mol) 9.0 mL of 3.0 M HC2H3O2 55.0 mL of water -What is the total volume of the solution? -Calculate the concentration of the [C2H3O2-] in this solution. -Calculate the concentration of the [HC2H3O2] in this solution. -Calculate the pH of this buffer solution. The Ka for acetic acid is 1.8x10-5. -If you take half of this solution and add 2...

Sodium acetate (NaOAc) is the sodium salt of the conjugate base of acetic acid (HOAc). Although...

Sodium acetate (NaOAc) is the sodium salt of the conjugate base of acetic acid (HOAc). Although NaOAc is a strong electrolyte, the acetate ion itself (OAc−) is a weak base. Assume pKa = 4.76 for HOAc.a. (1 pt) Calculate the pH of a 50.0 mM HOAc solution. Using a 5% criterion, exp licitly check any approximations you make to ensure they are valid.b.(1 pt) Calculate the pH of a 50.0 mM NaOAc solution. Again, check your assumptions.

You are preparing a buffer consisting of acetic acid and sodium acetate with a total of...

You are preparing a buffer consisting of acetic acid and sodium acetate with a total of acetic acid and sodium acetate concentration of 250 mM and a PH of 5.0. What concentration of acetic acid and sodium acetate should you use?

A mixture is 11 mol% ethanol, 79 mol% ethyl acetate (C4H8O2) and 10 mol% acetic acid...

A mixture is 11 mol% ethanol, 79 mol% ethyl acetate (C4H8O2) and 10 mol% acetic acid (C2H4O2). (a) Calculate the mass fraction of ethanol in this three-component mixture. (b) What is the average molecular weight of the three-component mixture? (c) What would be the mass (kg) of the three-component mixture such that the mixture contains 24 kmol of ethyl acetate? (d) A stream of the three-component mixture enters a mixing drum at 78 kg/min. For a basis of 78 kg/min,...

A solution contains 1.5M sodium acetate. The pKa of acetic acid (a weak acid) is 4.76....

A solution contains 1.5M sodium acetate. The pKa of acetic acid (a weak acid) is 4.76. Calculate the fraction and percentage of the molecules existing in the unionized state.

In the solution containing both 0.10 M acetic acid and 0.10 M sodium acetate, the acetic...

In the solution containing both 0.10 M acetic acid and 0.10 M sodium acetate, the acetic acid undergoes ionization. The chemical equation for this ionization reaction is the same as for a solution containing acetic acid alone. The difference is that the initial concentration of acetate ion (before any ionization reaction occurs) for the solution containing acetic acid alone is zero, whereas the initial concentration of acetate ion is 0.10 M in your solution containing both acetic acid and sodium...

A buffer solution is 0.20 M in acetic acid and sodium acetate. Calculate the change in...

A buffer solution is 0.20 M in acetic acid and sodium acetate. Calculate the change in pH upon adding 1.0mL of 0.10 M HCL to 10mL of this solution.

Prepare 1 L of an acetic acid sodium acetate buffer with a pH of 5.00 and...

Prepare 1 L of an acetic acid sodium acetate buffer with a pH of 5.00 and a buffer concentration of 100 mM. Besides water you only have a 500g bottle of sodium acetate trihydrate, 1L of 1.00 hydrochloric acid, and 1L of 1.00 M sodium hydroxide. A. Identify the reagents needed and calculate all amounts needed. B. Calculate the change in pH of a 250 mL portion of the buffer that has 1 mL of 1.00 M NaOH added to...

Concentration of acetic acid: 1.041M and concentration of sodium acetate is 1.071M. The buffer is created...

Concentration of acetic acid: 1.041M and concentration of sodium acetate is 1.071M. The buffer is created by mixing 100mL of acetic acid with 100mL of sodium acetate soluiton. a) What is the pH of 75mL of the buffer solution after the addition of 1mL of 3M NaOH? b) What is the pH of 75mL of the buffer solution after the addition of 5mL of 3M NaOH? c) What is the pH of 75mL of the buffer solution after the addition...

Subjects