Question

In: Chemistry

What is the potential application for the use of copper (II) sulfate? Properly cite any sources...

What is the potential application for the use of copper (II) sulfate? Properly cite any sources used.

Solutions

Expert Solution

potential application for the use of copper (II) sulfate

Copper sulphate, blue stone, blue vitriol are all common names for pentahydrated cupric sulphate, CuSO45H2O, which is the best known and the most widely used of the copper salts. Indeed it is often the starting raw material for the production of many of the other copper salts.

Uses

Copper sulphate is a very versatile chemical with as extensive a range of uses in industry as it has in agriculture. Its principal employment is in agriculture, and, up to a generation or so ago, about its only uses in industry were as a mordant for dyeing and for electroplating. Today it is being employed in many industrial processes:

  • The synthetic fibre industry has found an application for it in the production of their raw material
  • The metal industry uses large quantities of copper sulphate as an electrolyte in copper refining, for copper coating steel wire prior to wire drawing and in various copper plating processes
  • The mining industry employs it as an activator in the concentration by froth flotation of lead, zinc, cobalt and gold ores
  • The printing trade takes it as an electrolyte in the production of electrotype and as an etching agent for process engraving
  • The paint industry uses it in anti-fouling paints and it plays a part in the colouring of glass.

Indeed, today there is hardly an industry which does not have some small use for copper sulphate. In the table below, some of the many uses of copper sulphate are listed.

Food Additives: COLOUR_RETENTION_AGENT; PRESERVATIVE

                           - from FAO/WHO Food Additive Evaluations (JECFA)

Algicide           - from USGS Columbia Environmental Research Center

Agriculture Uses

Major:

  • Preparation of Bordeaux and Burgundy mixtures for use as fungicides
  • Manufacture of other copper fungicides such as copper-lime dust, tribasic copper sulphate, copper carbonae and cuprous oxide
  • Manufacture of insecticides such as copper arsenite and Paris green
  • Control of fungus diseases
  • Correction of copper deficiency in soils
  • Correction of copper deficiency in animals
  • Growth stimulant for fattening pigs and broiler chickens
  • Molluscicide for the destruction of slugs and snails, particularly the snail host of the liver fluke

Other uses

  • Seed dressing
  • Soil steriliser, e.g Cheshunt compound (a mixture of copper sulphate and ammonium carbonate) to prevent ‘damping-off’ disease of tomato etc.
  • Control and prevention of foot rot in sheep and cattle
  • Bacteriastat for addition to sheep dips
  • Disinfectant in prevention of the spread of swine erysepelas and white scours in calves
  • Control of scum in farm ponds
  • Plant nutrient in rice fields
  • Preservative for wooden posts, wooden buildings, etc
  • Ingredient of vermin repellents, e.g for application to bark of trees against rabbits
  • Stimulant of latex yield on rubber plantations
  • Protection against algal growths on flower pots

Public health and Medicine

  • Destruction of algal blooms in reservoirs and swimming pools
  • Prevention of the spread of athletes foot in warm climates, by incorporation in the flooring mixture of swimming baths
  • Control of bilharzia in tropical countries, as a molluscicide
  • Prevention of malaria, in the preparation of Paris green for use against mosquito larvae
  • Antiseptic and germicide against fungus infections
  • Catalyst or raw material for the preparation of copper catalysts used in the manufacture of pharmaceutical products

Industry

Adhesives

  • Preservative in casein and other glues
  • Additive to book binding pastes and glues, for insecticidal purposes
  • Additive to animal and silicate glues to give water resistance

Building

  • Timber preservtive and in the preparawtion of other wood preservatives, e.g oil-based copper naphthenates and water-based copper/chrome/arsenic for the prevention of woodworms and wood rots
  • Ingredient of plaster to prevent fungus infection, e.g to prevent the spread of dry rot
  • Ingredient of concrete, both as a colouring matter and as an antiseptic, e.g for use in and around swimming pools
  • Modification of the setting of concrete
  • Protection against lichens, moulds and similar growths on asbestos cement roofing and other building materials
  • Control of the growth of tree roots in sewers

Chemical

  • Preparation of catalysts for use in many industries
  • Purification of gases, e.g removal of hydrogen chloride and hydrogen sulphide
  • Precipitation promoter in purifying zinc sulphate solutions
  • Precipitation of alkaloids as double salts from crude extracts
  • Source of other copper compounds such as copper carbonate silicate/arsenite/aceto-arsenite/resinate/stearate/tartrate/oleate naphthenate/chromate/chlorate/alginate/fluoride/hydroxide/cuprous oxide/chloride/cyanide and cuprammonium compounds

Decorate trades

  • Colouring glass
  • Colouring cement and plaster
  • Colouring ceramic wares
  • Alteration of metal colours, e.g darkening of zinc, colouring aluminium

Dyestuffs

  • Reagent in the preparation of dyestuffs intermediates
  • Catalyst or raw material for the preparation of copper ca\talysts, e.g preparation of phenols from diago compounds, preparation of phthalocyanine dyes

Leather

  • Mordant in dyeing
  • Reagent in tanning processes

Metal and electrical

  • Electrolyte in copper refining
  • Electrolyte in copper plating and electro forming
  • Electrolyte manufacture of cuprous compounds, e.g cuprous oxide
  • Constituent of the electrodes and electrolytes in batteries
  • Electrolyte in the manufacture of copper powder
  • Electrolyte in aluminium plating and anodising
  • Copper coating steel wire, prior to wire drawing
  • Pickling copper wire, etc, prior to enamelling
  • Providing a suitable surface for marking out iron and steel

Mining

  • Flotation reagent in the concentration of ores, e.g zinc blende
  • Raw material for the manufacture of copper naphthenate and other copper compounds for use in anti-fouling paints

Paint

  • Preparation of certain varnish or paint dryers, e.g copper oleate, copper stearate
  • Preparation of certain pigments, e.g copper chromate, copper ferrocyanide, copper phthalocyanine

Printing

  • Etching agent for process engraving
  • Electrolyte in the preparation of electrotype
  • Ingredient of printing inks

Synthetic rubber
and petroleum

  • Preparation of catalysts used in cracking certain gaseous and liquid petroleum
  • Fractions
  • Preparation of cuprous chloride, used in the purification of butadiene and in the separation of acetylene derivatives
  • Preparation of catalysts used in chlorinating rubber latex
  • Purification of petroleum oils

Textiles

  • Preparation of copper compounds for rot-proofing canvas and other fabrics
  • Rot-proofing sandbags
  • Mordant, especially in calico printing
  • Cuprammonium process for the production of rayon
  • Production of aniline black and diazo colours for dyeing
  • ‘After coppering’ to increase the fastness of dyes
  • Catalyst in the manufacture of cellulose ethers and in cellulose acetylation

Miscellaneous

  • Improving the burning qualities of coke
  • Laboratory analytical work
  • Ingredient of laundry marking ink
  • Dyeing of hair and horn
  • Ingredient of hair dyes of the phenylene diamine or pyrogallol type
  • Preparation of chlorophyll as a colouring material for foodstuffs
  • Imparting a green colour in fireworks
  • Activator in the preparation of active carbons
  • Preservative for wood pulp
  • Preservation of fishing nets and hides on trawls
  • Obtaining a blue-back finish on steel
  • Treatment of carbon brushes
  • Ingredient of the solution used for preserving plant specimens in their natural colours
  • Impregnation in fruit wrapping papers to prevent storage rots

Related Solutions

You are allowed to use any sources you like. Make sure to cite any sources you...
You are allowed to use any sources you like. Make sure to cite any sources you use (any reasonable citation style is fine). Do not copy text from any source (short, cited quotes OK). Question: In a species of deer, you find an allele that causes females to always produce an equal number of male and female offspring. Present an argument affirming that this sex ratio is an evolutionary stable strategy. Then, try to present a plausible scenario in this...
In the reaction of copper(II) sulfate with iron, what species is oxidized?             CuSO4 (aq) +...
In the reaction of copper(II) sulfate with iron, what species is oxidized?             CuSO4 (aq) + Fe (s) →→ Cu (s) + FeSO4 (aq) a. Cu2+ in CuSO4 b. Fe (s) c. Cu (s) d. Fe2+ in FeSO4 In the reaction of copper(II) sulfate with iron, what species is the oxidizing agent?             CuSO4 (aq) + Fe (s) →→ Cu (s) + FeSO4 (aq) a. CuSO4 b. Fe (s) c. Cu (s) d. FeSO4
There are two possible methods for recovering copper from a solution of copper (II) sulfate, one...
There are two possible methods for recovering copper from a solution of copper (II) sulfate, one uses precipitation and the other uses redox. Copper(II) ions can be precipitated as copper(II) carbonate. CuSO4(aq) + Na2CO3(aq) → CuCO3(s) + Na2SO4(aq) How many mL of 0.363 M Na2CO3 would be needed to precipitate all of the copper ions in 47.0 mL of 0.323 M CuSO4? mL How many grams of CuCO3(s) would be formed from the copper ions in 47.0 mL of 0.323...
There are two possible methods for recovering copper from a solution of copper (II) sulfate, one...
There are two possible methods for recovering copper from a solution of copper (II) sulfate, one uses precipitation and the other uses redox. Copper(II) ions can be precipitated as copper(II) carbonate. CuSO4(aq) + Na2CO3(aq) → CuCO3(s) + Na2SO4(aq) 1. How many mL of 0.25 M Na2CO3 would be needed to precipitate all of the copper ions in 32.2 mL of 0.69 M CuSO4? 2. How many grams of CuCO3(s) would be formed from the copper ions in 32.2 mL of...
There are two possible methods for recovering copper from a solution of copper (II) sulfate, one...
There are two possible methods for recovering copper from a solution of copper (II) sulfate, one uses precipitation and the other uses redox. (a) Copper(II) ions can be precipitated as copper(II) carbonate. CuSO4(aq) + Na2CO3(aq) → CuCO3(s) + Na2SO4(aq) How many mL of 0.144 M Na2CO3 would be needed to precipitate all of the copper ions in 25.5 mL of 0.165 M CuSO4? How many grams of CuCO3 could be recovered? (Include units in your answer. More information.) Na2CO3     _____...
There are two possible methods for recovering copper from a solution of copper (II) sulfate, one...
There are two possible methods for recovering copper from a solution of copper (II) sulfate, one uses precipitation and the other uses redox. Copper(II) ions can be precipitated as copper(II) carbonate. CuSO4(aq) + Na2CO3(aq) → CuCO3(s) + Na2SO4(aq) How many mL of 0.495 M Na2CO3 would be needed to precipitate all of the copper ions in 70.3 mL of 0.790 M CuSO4?  mL How many grams of CuCO3(s) would be formed from the copper ions in 70.3 mL of 0.790 M...
As a solution of copper sulfate slowly evaporates, beautiful blue crystals made of Cu(II) and sulfate...
As a solution of copper sulfate slowly evaporates, beautiful blue crystals made of Cu(II) and sulfate ions form such that water molecules are trapped inside the crystals. The overall formula of the compound is CuSO4 • 5H2O. part 1 what is the percent water in this compound? ___% part 2 at high tempreatures the water in the compound is driven off as steam. what mass percentage of the original sample of the blue solid is lost as a result? ___%
If an aqueous solution is 4.48% (w/v) in copper(II) sulfate, CuSO4 , what is the osmolarity...
If an aqueous solution is 4.48% (w/v) in copper(II) sulfate, CuSO4 , what is the osmolarity of the solution? Osmolarity = _______ osmol/L
A 2 mL sample of copper (II) sulfate CuSO4 was found to have a concentration of...
A 2 mL sample of copper (II) sulfate CuSO4 was found to have a concentration of 0.004M. How many moles of copper are in the solution? How many moles of sulfate are in the solution? How many grams of copper are in the sample? Write the concentration in grams of copper per milliliter of solution. If 1 mL of the sample is added to a 50 mL volumetric flask and diluted with water, what is the concentration of the diluted...
Write the equation for the following precipitaion reaction Copper (II) Nitrate and Sodium Sulfate a. molecular...
Write the equation for the following precipitaion reaction Copper (II) Nitrate and Sodium Sulfate a. molecular equation b. ionic equation c. net ionic equation
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT