f) Discuss the following design criteria “the member must be designed adequately and safely to sustain...

f) Discuss the following design criteria “the member must be designed adequately and safely to sustain the load i.e. ᵠR≥ᵞQ”

g) What are the difference between design and analysis of the rc section?

h) Explain the behavior of rc beam (load-deflection or Moment-curvature) under the flexural loading highlighting different stages of loading till failure; i.e. un-cracked section, cracked section, service condition, yielding and ultimate loading condition.

Expert Solution

f) Structure is the basic civil engineering entity which is used in every day life. The every RC structure should be safe against collapse. i.e., the structure should be designed such that it should withstand the acting loads throughout its service period. Such that the strength of the structure should be greater than that of loads acting on it.

i.e., Design strength >> Strength of factored loads.

Why it is needed ?

If the designed structure didn’t meet the requirements it will be collapsed. Which leads to lots of loss property loss and people. So to avoid all this circumstances we should design the structure conservatively. So we should design the structure to its ultimate strength.

g) Analysis deals with the how much force is applied on the structure and analyse at different cross section. Is the acting force exceeds the ultimate strength. And behaviour of the structure under these loads.

And design is related with the shape and size of that cross section so that it can safely trasmit the load.

Ally Wells answered 1 year ago

Briefly discuss a strategy a firm operating in a perfectly competitive market must take to sustain...

Briefly discuss a strategy a firm operating in a perfectly competitive market must take to sustain its profit outlook. A firm operating in a competitive market has the following cost function C = 10 + 2Q2. The market demand is Q = 40 – 2P and equilibrium price of output is $20. Calculate the output the firm must produce to maximize its profits. Find the price the firm must charge to maximize profits.

Discuss the result of the design of fillet weld for a tie member of a truss...

Discuss the result of the design of fillet weld for a tie member of a truss consist of an angle section ISA 100 x 75 x 8 mm of Fe410 grade, is welded to an 8 mm gusset plate. Design a weld to transmit a load equal to the full strength of the member. Assume shop welding. If the gusset plates are connected by 2 angle section ISA 65 x 65 x 6 mm back to back to the same...

Discuss the four criteria that the resources of a firm must possess to maintain a sustainable...

Discuss the four criteria that the resources of a firm must possess to maintain a sustainable advantage. Give an example of one of these criteria.

Design a Ship class that has the following members: • A member variable for the name...

Design a Ship class that has the following members: • A member variable for the name of the ship (a string) • A member variable for the year that the ship was built (a string) • A constructor and appropriate accessors and mutators • A virtual print function that displays the ship’s name and the year it was built. Design a CruiseShip class that is derived from the Ship class. The CruiseShip class should have the following members: • A...

plese answer all 7 multipple choice questions 1. Which of the following must occur to sustain...

plese answer all 7 multipple choice questions 1. Which of the following must occur to sustain economic growth in the long run? A) technological progress B) capital accumulation C) a higher saving rate D) all of the above 2. Constant returns to scale implies that if N and K both increase by 3% that A) Output (Y) will increase by 3%. B) Y/N will increase by 3%. C) Y/N will increase by less than 3%. D) the capital-labor ratio will...

A freeway is to be designed to provide LOS C for the following conditions: design hourly...

A freeway is to be designed to provide LOS C for the following conditions: design hourly volume of 5600 veh/h; PHF: 0.92; trucks: 6%; recreational vehicles: 0%; driver population: commuters and familiar drivers; right side lateral clearance: 7ft; rolling terrain; total ramp density of 0.75 ramps per mile. Determine: whether eight (four in each direction) 12 ft lanes are enough to provide LOS C.

In an essay, answer the following questions: Describe what criteria must be present to constitute a...

In an essay, answer the following questions: Describe what criteria must be present to constitute a legal and binding sales contract. Briefly summarize the uniform commercial code and if it applies in this scenario. Explain if any criminal laws have been violated as it relates to cyber laws. Develop and explain your legal strategy to gain a refund of your money. What rights do you have with your bank, eBay, and PayPal? You and your family have recently closed on...

/Design and code a class Calculator that has the following tow integer member variables, num1...

/*Design and code a class Calculator that has the following * tow integer member variables, num1 and num2. * - a method to display the sum of the two integers * - a method to display the product * - a method to display the difference * - a method to display the quotient * - a method to display the modulo (num1%num2) * - a method toString() to return num1 and num2 in a string * - Test your...

write the code in python Design a class named PersonData with the following member variables: lastName...

write the code in python Design a class named PersonData with the following member variables: lastName firstName address city state zip phone Write the appropriate accessor and mutator functions for these member variables. Next, design a class named CustomerData , which is derived from the PersonData class. The CustomerData class should have the following member variables: customerNumber mailingList The customerNumber variable will be used to hold a unique integer for each customer. The mailingList variable should be a bool ....

Which of the following is not included as one of the items that the design must determine

Which of the following is not included as one of the items that the design must determine a) The number of factors to include in the experiment b) The levels at which each factor will be tested c) The response variable d) The design repot distribution e) The conditions (settings) for each trial

Question