Question

In: Mechanical Engineering

A cylindrical storage tank contains liquefied propane under a pressure of 1.5 MPa (gage pressure P=1.5...

A cylindrical storage tank contains liquefied propane under a pressure of 1.5 MPa (gage pressure P=1.5 MPa) and is subjected to a torque T=5 kN-m. Knowing that the tank has an inner diameter of 320 mm and a wall thickness of 3 mm, find the principal stresses and determine the maximum shear stress.

Solutions

Expert Solution

Answer- maximum principal stress= 82.478M pa

Minimum principal stress= 37.521M pa

Absolute maximum shear stress= 41.2391M pa

Details solutions is given below

Please like it


Related Solutions

A cylindrical storage tank contains liquefied propane under a pressure of 1.5 MPa (gage pressure P=1.5...
A cylindrical storage tank contains liquefied propane under a pressure of 1.5 MPa (gage pressure P=1.5 MPa) and is subjected to a torque T=5 kN-m. Knowing that the tank has an inner diameter of 320 mm and a wall thickness of 3 mm, find the principal stresses and determine the maximum shear stress.
A cylindrical air tank has dimensions diameter = 0.2m and height 0.8m. an attached pressure gage...
A cylindrical air tank has dimensions diameter = 0.2m and height 0.8m. an attached pressure gage reads 200 kPa and the temperature is 27 celcius. an electrical heater is energized inside and it raises the temperature to 147 celius in 2 minutes. Calculate the mass of air in the tank (kg) (have to use ideal gas law, molecular weight of air)
You need to design a relief valve for a new pressurized propane storage tank. As part...
You need to design a relief valve for a new pressurized propane storage tank. As part of the design process, you need to calculate the maximum pressure inside the tank for any feasible “worst case” scenario. One of your design cases is that a fire breaks out beneath the tank, causing the liquid propane inside to rapidly heat up to 250°F. The tank is a rigid 10 ft3 vessel that holds 150 lbm of propane. What is the pressure inside...
A tank that initially contains H2O at 0.05 MPa and 100 ºC, is connected to a...
A tank that initially contains H2O at 0.05 MPa and 100 ºC, is connected to a water vapor line at 0.60 MPa and 200 ºC and is filled to a level where 90% (on a volumetric basis) is liquid. The 1 m3 tank is kept at 100 ºC during the process. Determine the quality of the gas in the second phase, the input mass in (kg) and the heat transfer, in kJ.
Steam is contained in a 4-liter volume at a pressure of 1.5 MPa and a temperature...
Steam is contained in a 4-liter volume at a pressure of 1.5 MPa and a temperature of 200°C. If the pressure is held constant by expanding the volume while 40 kJ of heat is added, find the final temperature. use enthalpy.
The propane is contained in a piston-cylinder assembly, which maintains constant pressure at 0.2 MPa. If...
The propane is contained in a piston-cylinder assembly, which maintains constant pressure at 0.2 MPa. If a mixture with a quality of 0.65 and a total volume of 0.07 m3 is slowly heated to a temperature of 54°C, a) what was the total work into the system b) what was the total amount of heat added to the system. Please explain what tables you use to find the answer.
The propane is contained in a piston-cylinder assembly, which maintains constant pressure at 0.2 MPa. If...
The propane is contained in a piston-cylinder assembly, which maintains constant pressure at 0.2 MPa. If a mixture with a quality of 0.65 and a total volume of 0.07 m3 is slowly heated to a temperature of 54°C. a) what was the total work into the system. b) what was the total amount of heat added to the system.
A spherical storage tank contains oil. The tank has a diameter of 6 feet. You are...
A spherical storage tank contains oil. The tank has a diameter of 6 feet. You are asked to calculate the height at which an 8-foot-long dipstick would be wet with oil when immersed in the tank when it contains 6 ft3 of oil. The equation giving the height h of the liquid in the spherical tank for the given volume and radius is given by: f(h) = h3−9h2 + 3.8197 Use the secant method to find roots of equations to...
A steel tank contains water at ? = 1.00 MPa and ℎ = 3100 kJ/kg. Determine...
A steel tank contains water at ? = 1.00 MPa and ℎ = 3100 kJ/kg. Determine the following: a. State of the water; ie whether the water is compressed water or saturated water or superheated vapour? (Hint: Use Saturated water—Pressure table to compare ℎ at ? = 1.00 MPa) b. Estimate the temperature of the water. (Hint: Use Saturated water—Pressure table or Superheated water, depending on the state you find in a) c. Other properties of water in the tank...
A closed and elevated vertical cylindrical tank with diameter 2.00m contains water to a depth of...
A closed and elevated vertical cylindrical tank with diameter 2.00m contains water to a depth of 0.900m . A worker accidently pokes a circular hole with diameter 0.0190m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of5.00�103Pa at the surface of the water. Ignore any effects of viscosity. A. Just after the hole is made, what is the speed of the water as...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT