Two loads connected in parallel draw a total of 4 kW at 0.68pf lagging from a 120-v ms, 60-Hz line. One load absorbs 3.3 kVAR at a 0.6 pf lagging. Determine: a) The pf of the second loadb) The capacitor value in Farads required to correct the overall pf from 0.68 to 0.9 lagging for combine loads. c) The current drawn from the supply under the new power factor of 09.

Question

In: Other

Two loads connected in parallel draw a total of 4 kW at 0.68pf lagging from a 120-v ms, 60-Hz line.

Two loads connected in parallel draw a total of 4 kW at 0.68pf lagging from a 120-v ms, 60-Hz line. One load absorbs 3.3 kVAR at a 0.6 pf lagging. Determine:

a) The pf of the second load

b) The capacitor value in Farads required to correct the overall pf from 0.68 to 0.9 lagging for combine loads.

c) The current drawn from the supply under the new power factor of 09.

Solutions

Expert Solution

Amanda K answered 2 years ago

Next > < Previous

Related Solutions

Two parallel connected loads take a total of 2.4 kW, with a 0.8 line delay at...

Two parallel connected loads take a total of 2.4 kW, with a 0.8 line delay at 120 Vrms and 60 Hz. One load absorbs 1.5 kW with a fp delay of 0.707. Determine: a) The fp of the second charge b) The parallel element required to correct the fp of the two loads and convert it to a delay of 0.9

Three loads are connected in parallel to an AC supply of 120∠0° V. The loads are...

Three loads are connected in parallel to an AC supply of 120∠0° V. The loads are 40∠30° Ω, 50 - j30 Ω and 30 + j40 Ω. a) Draw the circuit diagram b) Determine the amplitude and phase angle of the supply current graphically by constructing a phasor diagram using a suitable scale of the load currents and source voltage. c) State the overall power factor using the answer from part (b). d) Construct another phasor diagram for the system...

A three-phase motor is delta connected to a 415 V, 60 Hz line. If the line...

A three-phase motor is delta connected to a 415 V, 60 Hz line. If the line current is 25 A and the motor power factor is 0.75, how much power is consumed by the motor (a) Determine the size of the bank of three capacitors to improve the power factor of the motor to 0.95. The capacitors are delta connected. (b) If two of the motors work together, what is the size of capacitors to correct the power factor to...

480 V, 200 kVA, 08 PF lagging, 60 Hz two pole Y connected synchronous generator has...

480 V, 200 kVA, 08 PF lagging, 60 Hz two pole Y connected synchronous generator has a synchronous reactance of 0.25 Ω and an armature resistance of 0.03 Ω. At 60 Hz, its friction and windage losses are 6 kW, and its core losses are 4 kW. The field circuit has a dc voltage of 200 V, and the maximum IF is 10 A. The resistance of the field circuit is adjustable over the range from 20 to 200 Ω....

Q3) A three-phase, Y-connected, 220 V, 13 kW, 60 Hz, six-pole induction motor has the following...

Q3) A three-phase, Y-connected, 220 V, 13 kW, 60 Hz, six-pole induction motor has the following parameter values in Ω/phase referred to the stator: R1 = 0.3 Ω. R2' = 0.15 Ω X1 = 0.5 Ω. X2'= 0.21 Ω Xm = 13.25 Ω The total rotational losses are 450 W. The core loss is lumped in with the rotational losses. For a slip of 0.02, and based on approximate equivalent circuit, determine: (i) The rotor speed. (ii) The stator current....

A 3 phase 460 V, 60 Hz, 4 pole, delta connected induction motor has the following...

A 3 phase 460 V, 60 Hz, 4 pole, delta connected induction motor has the following equivalent circuit parameters. Rs = 0.42 Ω, Rr = 0.23 Ω, Xs = Xr = 0.82 Ω. Xm = 22 Ω. The no load loss = 60 W and may be assumed constant. The rotor speed is 1750 rpm. Use the approximate equivalent circuit ( i.e. the Xm branch is at the very left of the circuit) determine the following a. the synchronous speed...

A balanced positive-sequence wye-connected 60-Hz three-phase source has line-to-line voltages of VL = 440 V rms....

A balanced positive-sequence wye-connected 60-Hz three-phase source has line-to-line voltages of VL = 440 V rms. This source is connected to a balanced wye-connected load. Each phase of the load consists of a 0.5-H inductance in series with a 50-? resistance. Assume that the phase of Van is zero. A) Find the line-to-neutral voltage phasor Van. Enter your answer using polar notation. Express argument in degrees. B) Find the line-to-neutral voltage phasor Vbn. Enter your answer using polar notation. Express...

A 50-Hz, 440-V, 2 pole wye connected induction motor is rated at 75 kW. The equivalent...

A 50-Hz, 440-V, 2 pole wye connected induction motor is rated at 75 kW. The equivalent parameters are as follows: RS = 0.075 Ω RR’ = 0.065 Ω XS = XR’ = 0.17 Ω Xm = 7.2 Ω The losses associated with the machine are field and winding, miscellaneous and core loss with values of 1 kW, 150 W and 1.1 kW, respectively. For a slip of 4 %, determine a) The line current. (150.39  -23.08 A) b) The...

A 50-Hz, 440-V, 6 pole wye connected induction motor is rated at 75 kW. The equivalent...

A 50-Hz, 440-V, 6 pole wye connected induction motor is rated at 75 kW. The equivalent parameters are as follows: RS = 0.082 Ω; RR’ = 0.07 Ω; XS = 0.19 Ω; XR’ = 0.18 Ω; XM = 7.2 Ω The losses associated with the machine are field and winding, miscellaneous and core loss with values of 1.3 kW, 150 W and 1.4 kW, respectively. For a slip of 4 %, determine: a) The line current b) The stator power...

A 440-V, 3-φ 50-Hz, 4 poles, 37.3 kW, Y-connected induction motor has the following parameters: R1=...

A 440-V, 3-φ 50-Hz, 4 poles, 37.3 kW, Y-connected induction motor has the following parameters: R1= 0.1 Ω, X1 = 0.4 Ω , R2′ = 0.15 Ω , X2′ = 0.44 Ω Motor has stator core loss of 1250 W and rotational loss of 1000 W. It draws a no-load line current of 20 A at a p.f. of 0.09 (lag). When motor operates at a slip of 3%, calculate a. input line current and p.f. [57.4@29°A, 0.875 lag] b....

Subjects