A single stage double acting air compressor having a clearance of 4% takes in air at...

A single stage double acting air compressor having a clearance of 4% takes in air at 14.2 Psia and 60 and compresses it to 200 Psia. If the weight of the air compressed per minute is 50 lbs. and n = 1.35, compute: a) The work required to compress the air per minute b) The piston displacement if the compressor operates at 100 RPM c) The volume of free air measured at 14.7 Psia atmospheric pressure.

Expert Solution

samet mamat answered 1 year ago

. A single stage double acting air compressor delivers 5 m of free air per minute...

. A single stage double acting air compressor delivers 5 m of free air per minute at 1 bar and 20 C to 7.5 bar with the following data;R.P.M. = 300; Temperature rise of air during suction stroke = 12 C ; Clearance volume = 5% of stroke volume; Index of compression and expansion, n=1.3; Length of the stroke = 1.3 times the cylinder diameter. Calculate: 1. Power input to the shaft; 2. The volumetric efficiency; and 3. The cylinder...

A single stage double acting air compressor delivers 15 m3/min. measured at 1.013 bar and temperature...

A single stage double acting air compressor delivers 15 m3/min. measured at 1.013 bar and temperature 270C and delivers at 7 bar. The conditions at the end of the suction stroke are pressure 0.98 bar and temperature 400C. The clearance volume is 4% of the swept volume and the stroke / bore ratio is 1.3/1, compressor runs at 992 rpm. Calculate the volumetric efficiency, cylinder dimensions, indicated power and isothermal efficiency of this compressor. Take the index of compression and...

A two stage, single-acting compressor has a free air delivery of 4.2 m3/min when the ambient...

A two stage, single-acting compressor has a free air delivery of 4.2 m3/min when the ambient condition is 1.013 bar, 15oC. • The suction pressure and temperature are 0.98 bar and 32oC respectively. • The air is compressed to 16 bar according to the law pv1.3 = C. Assuming that the compressor is designed for minimum work with complete intercooling, calculate the indicated power required to drive the compressor.

An air compressor operating in adiabatic steady flow takes in air at 17 C, 200 kPa...

An air compressor operating in adiabatic steady flow takes in air at 17 C, 200 kPa and discharges is at 1300 kPa. Calculate the minimum work required to drive the compressor assuming the compressor has i) constant specific heats. ii) non-constant specific heats.

11. A cast iron flywheel is to be designed for a single cylinder double acting steam...

11. A cast iron flywheel is to be designed for a single cylinder double acting steam engine which delivers 150 kW at 80 r.p.m. The maximum fluctuation of energy per revolution is 10%. The total fluctuation of the speed is 4 per cent of the mean speed. If the mean diameter of the flywheel rim is 2.4 metres, determine the following : (a) Cross-sectional dimensions of the rim, assuming that the hub and spokes provide 5% of the rotational inertia...

1) A reciprocating compressor has two stages with inlet air going into LP stage at 1...

1) A reciprocating compressor has two stages with inlet air going into LP stage at 1 bar, 16°C and at the rate of 12 m3/min. Air is finally delivered at 7 bar and there is perfect intercooling at optimum pressure between the stages. The index for compression is 1.25 and compressor runs at 600 rpm. Neglecting clearance volume determine intermediate pressure and total power required. 2) A reciprocating compressor of single stage and double acting type has free air delivered...

Refrigerant 134a enters an air conditioner compressor at 4 bar, 20°C, and is compressed at steady...

Refrigerant 134a enters an air conditioner compressor at 4 bar, 20°C, and is compressed at steady state to 12 bar, 80°C. The volumetric flow rate of the refrigerant entering is 7.5 m3/min. The work input to the compressor is 112.5 kJ per kg of refrigerant flowing. Neglecting kinetic and potential energy effects, determine the magnitude of the heat transfer rate from the compressor, in kW.

create a class in C++ having the following 4 private members: one double variable representing the...

create a class in C++ having the following 4 private members: one double variable representing the balance of a bank account on string variable representing the bank account number a function to deposit money from the bank account a function to withdraw money from the bank account the following 2 public members: -two wrapper functions. - one parameterless constructor - one constructor initializing the account balance and account number - sample: #include <iostream> using namespace std; class account { public:...

I have having trouble with data table 4 and i would like someone to double check...

I have having trouble with data table 4 and i would like someone to double check my work on the other tables. NaHCO3(s) + HC2H3O2(aq) → C2H3O2Na(aq) +H2CO3(aq) H2CO3(aq)→ H2O(l) +CO2(g) Note: 5 mL of 5% vinegar contains 0.25 mL of HC2H3O2 with a density of 1.0 g/mL which equals 0.25 g HC2H3O2. Data Table 4 Limiting Reactant Theoretical yield of CO2(moles) Theoretical yield of CO2(g) Reaction 1 NaHCO2 Reaction 2 NaHCO2 Reaction 3 HC2H3O2 Reaction 4 HC2H3O2 Data...

4. Explain how the following computations are performed using both IEEE single precision and double precision...

4. Explain how the following computations are performed using both IEEE single precision and double precision floating point representation. a. 11716 +2A916 b. 1011.112-11.1510 c. 1.0010102 x 0.011012 d. Comment on any differences you see in accuracy and precision.

Question