Question

In: Physics

A cellist tunes the C-string of her instrument to a fundamental frequency of 65.4 Hz. The...

A cellist tunes the C-string of her instrument to a fundamental frequency of 65.4 Hz. The vibrating portion of the string is 0.600 m long and has a mass of 14.5 g

A.) With what tension must she stretch that portion of the string?
B.) What percentage increase in tension is needed to increase the frequency from 65.4 Hz to 73.4 Hz, corresponding to a rise in pitch from C to D?

Solutions

Expert Solution

Concepts and reason

The concepts used to solve this problem are fundamental frequency and tension on a string.

Initially, use the concept of fundamental frequency of the string to calculate the tension on the string.

Initially, use the relationship between frequency and tension of the string to find the relationship between the actual and current tension in the string.

Finally, use the relationship between percentage change in tension, actual tension, and changed tension to find the required percentage that increases in tension.

Fundamentals

The expression for the frequency on a string is as follows:

Here, frequency is , length of the string is , tension on the string is , and mass is .

The expression for the percentage change in tension is as follows:

Here, percentage change in tension is , and the changed tension is .

(A)

The expression for the fundamental actual frequency in the string is as follows:

Here, the fundamental actual frequency is , and the actual tension is .

Rearrange the expression for .

Substitute for , for , and for .

(B)

The expression for the fundamental actual frequency in the string is as follows:

…… (1)

Here, the fundamental actual frequency is and the actual tension is .

The expression for the fundamental current frequency in the string is as follows:

…… (2)

Here, the fundamental current frequency is and current tension is .

From Equations (1) and (2):

The ratio between current and actual tension is as follows:

Substitute for and for .

Substitute for .

The expression for the percentage increase in the tension is as follows:

Substitute for and for .

Ans: Part A

The tension in the string is .

Part B

The required percentage increase in the tension is .


Related Solutions

The C string of a certain musical instrument is overstretched. The accurate frequency of this note...
The C string of a certain musical instrument is overstretched. The accurate frequency of this note should be 261.6 Hz, which is emitted by a tuning fork. Six beats per second are heard when the string is sounded together with a tuning fork. What is the frequency produced by the string of this instrument? A) 267.6 Hz B) 255.6 Hz C) 133.8 Hz D) 127.8 Hz E) Not enough information to tell if the frequency is above or below the...
A dog tunes one string of a banjo to play at 362 Hz, while a second...
A dog tunes one string of a banjo to play at 362 Hz, while a second string is tuned to play at 463 Hz. The strings are made of the same material, and thus have the same density. Determine the following. A. The frequency of the second harmonic of the first string. (include units with answer) Format Check 7.86 pts.110% 2% try penalty Bonus hint Hints: 0,0 # tries: 0 B. The ratio of the masses of the two strings...
1. A vibrating string is cut in half. The fundamental frequency of the string will be......
1. A vibrating string is cut in half. The fundamental frequency of the string will be... a. doubled b. unchanged c. reduced by half 2.On a pipe organ, for a closed pipe, if you double the length of the pipe, what happens to the fundamental frequency? a. It does not change. b. It doubles. c. It is reduced by half. d. It is reduced by 1/4. e. It is increased 4x. 3. When you blow gently across the top of...
​ A violinist is tuning her instrument to concert A (440 Hz)
 A violinist is tuning her instrument to concert A (440 Hz). She plays the note while listening to an electronically generated tone of exactly that frequency and hears a beat frequency of 3 Hz, which increases to 4 Hz when she tightens her violin string slightly. (a) What was the frequency of the note played by her violin when she heard the 3-Hz beats? (b) To get her violin perfectly tuned to concert A, should she tighten or loosen her...
A guitarist tunes one of her strings to a 440 Hz tuning fork. Initially, a beat...
A guitarist tunes one of her strings to a 440 Hz tuning fork. Initially, a beat frequency of 5 Hz is heard when the string and tuning fork are sounded. When the guitarist tightens the string slowly and steadily, the beat frequency decreases to 4 Hz. What was the initial frequency of the string?
The string shown in the figure below is driven at a frequency of 5.00 Hz. The...
The string shown in the figure below is driven at a frequency of 5.00 Hz. The amplitude of the motion is 15.0 cm and the wave speed is 19.5 m/s. Furthermore, the wave is such that y = 0 at x = 0 and t = 0. (a) Determine the angular frequency for this wave. ? = rad/s (b) Determine the wave number for this wave. k = rad/m (c) Write an expression for the wave function. (Use the following...
A violinist is tuning her instrument to concert A (440 Hz ). She plays the note...
A violinist is tuning her instrument to concert A (440 Hz ). She plays the note while listening to an electronically generated tone of exactly that frequency and hears a beat of frequency 5.00 Hz , which increases to 6.00 Hz when she tightens her violin string slightly. What was the frequency of her violin when she heard the 5.00 Hz beat?
The G string on a guitar is 69 cm long and has a fundamental frequency of...
The G string on a guitar is 69 cm long and has a fundamental frequency of 196 Hz. A guitarist can play different notes by pushing the string against various frets, which changes the string's length. The third fret from the neck gives B♭ (233.08 Hz); the fourth fret gives B (246.94 Hz). How far apart are the third and fourth frets? Express your answer to two significant figures and include the appropriate units.
. If a string fixed at both ends resonates in its fundamental mode with a frequency...
. If a string fixed at both ends resonates in its fundamental mode with a frequency of 150 Hz, at which of the following frequencies will it not resonate?
A violinist is tuning her instrument to concert A (440 Hz). She plays the note while...
A violinist is tuning her instrument to concert A (440 Hz). She plays the note while listening to an electronically generated tone of exactly that frequency and hears a beat of frequency 5.00 Hz, which increases to 6.00 Hz when she tightens her violin string slightly.A) what was the frequency of her violin when she heard the 5.00 Hz beat?B) To get her violin perfectly tuned to concert A, should she tighten or loosen her string from what it was...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT