Question

In thin-layer chromatography (TLC), the _________[ Select ] ["mobile phase", "stationary phase"] is usually silica gel or alumina, and

THE [ Select ] ["mobile phase", "stationary phase"] is usually an organic solvent or mixture of organic solvents.

ANSWER THE QUESTION BY FILL IN THE BLANK 2 OPTIONS MOBIL PHASE OR STATIONARY PHASE. PLEASE DONT GIVE ANY WRONG ANSWERS AND THANKS FOR YOUR HELP !

Answer 1

Short answer:

In thin-layer chromatography (TLC), the _________[ Select ] ["mobile phase", "stationary phase"] is usually silica gel or alumina, and THE [ Select ] ["mobile phase", "stationary phase"] is usually an organic solvent or mixture of organic solvents.

Explanation of TLC:

TLC stands for Thin Layer Chromatography; it is an analytical technique in which we exploit each sample's affinity toward different polar/nonpolar solvents.

We use a stationary phase: a phase which does NOT moves, as the name implies. It is typically the "thin layer" or the "plate". It is commonly to use silica gel plates, which are polar, but any species could be used, such as paper.

We also use a mobile phase: as the name implies, this phase will "move" and will carry along the path all the components from the solvent. Many times, you will be able to split in several components the "mixture" of the sample. Therefore, they can be seen in the stationary phase (plate). Typically, we allow the mobile phase to go up to the "Rfinal" mark, or final reference. This is the distance travelled by the solvent (mobile phase). It starts at solvent level, it is R0, therefore.

Rf = distance traveled by sample / distance traveled by solvent

Then, "Rf" value allows us to understand the affinities of anaytes towards the solvent.

As Rf increases, this implies higher affinity toward the mobile phase ( since it is carried all along the mobile phase)

If Rf is low, this implies a low affinity toward the mobile phase; therefore higher affinity toward the stationary phase, since it sticks to the plate rather than travel upwards.