Question

In: Other

Diborane is used in silicon chip manufacture. One facility uses a 500-lb bottle. If the entire...

Diborane is used in silicon chip manufacture. One facility uses a 500-lb bottle. If the entire bottle is released continuously during a 20-min period. It is a clear, sunny day with a 5mph wind. Assume that the release is at ground level

a. Determine the location of the 5 mg/m3 ground-level isopleth.

b. Assume now that the bottle ruptures and that the entire contents of diborane are released instantaneously. Determine, at 10 min after the release,

(1) The location of the vapor cloud. (2) The location of the 5 mg/m3 isopleth. (3) The concentration at the center of the cloud.

(4) The total dosage received by an individual standing on the downwind axis at the 15-min downwind location.

(5) How far and long the cloud will need to travel to reduce the maximum concentration to 5 mg/m3

Work is highly appreciated, thanks!

Expert Solution

Amanda K answered 2 years ago

1. O’Brien Vineyards has the following direct materials standard to manufacture one bottle of Pinot Noir:...

1. O’Brien Vineyards has the following direct materials standard to manufacture one bottle of Pinot Noir: 2.4 pounds of grapes per bottle at $1.65 per pound Last week, 5,415 pounds of grapes were purchased and used to make 2,125 bottles. The grapes cost a total of $9,043.05. What is O’Brien Vineyards materials quantity variance and the materials price variance? (Don’t forget to indicate if the variances are favorable or unfavorable). What are 2 possible reasons for the variances? 2. O’Brien...

Spahr Company produces a part that is used in the manufacture of one of its products....

Spahr Company produces a part that is used in the manufacture of one of its products. The unit manufacturing costs of this part, assuming a production level of 5,000 units, are as follows: Direct materials $2.00 Direct labour $4.00 Variable manufacturing overhead 4.00 Fixed manufacturing overhead $2.00 Total cost $12.00 The fixed overhead costs are unavoidable. Erickson Company has offered to sell 5,000 units of the same part to Spahr Company for $11 per unit. Assuming the company has no...

Spahr Company produces a part that is used in the manufacture of one of its products.

Spahr Company produces a part that is used in the manufacture of one of its products. The unit manufacturing costs of this part, assuming a production level of 5,000 units, are as follows: Direct materials $2.00 Direct labour $4.00 Variable manufacturing overhead 4.00 Fixed manufacturing overhead $2.00 Total cost $12.00 The fixed overhead costs are unavoidable. Erickson Company has offered to sell 5,000 units of the same part to Spahr Company for $11 per unit. Assuming the company...

Cruise Company produces a part that is used in the manufacture of one of its products.

Cruise Company produces a part that is used in the manufacture of one of its products. The unit manufacturing costs of this part, assuming a production level of 6,000 units, are as follows: Direct materials $4.00 Direct labour $4.00 Variable manufacturing overhead $3.00 Fixed manufacturing overhead $4.00 Total cost $15.00 The fixed overhead costs are unavoidable. 6. Assuming Cruise Company can purchase 6,000 units of the part from Suri Company for $13 each, and the facilities currently used to make...

22) Gonzalez Company produces a part that is used in the manufacture of one of its...

22) Gonzalez Company produces a part that is used in the manufacture of one of its products. The annual costs associated with the production of 5,000 units of this part are as follows: Direct materials $100,000 Direct labor 56,000 Variable factory overhead 72,000 Fixed factory overhead 168,000 Total costs $396,000 Of the fixed factory overhead costs, $72,000 are avoidable. Another company has offered to sell 5,000 units of the same part to Gonzalez for $70.00 per unit. The facilities currently...

Bunny Company produces a part that is used in the manufacture of one of its products....

Bunny Company produces a part that is used in the manufacture of one of its products. The costs associated with the production of 11,000 units of this part are as follows: Direct materials $25,000 Direct labor 34,000 Variable factory overhead 65,000 Fixed factory overhead 50,000 $174,000 Of the fixed factory overhead costs, $9,000 is avoidable. Required: a. Assuming there is no alternative use for the facilities, should Bunny Company take advantage of an offer from a supplier who is willing...

Landry's Inc. produces a part that is used in the manufacture of one of its products....

Landry's Inc. produces a part that is used in the manufacture of one of its products. The costs associated with the production of 10,000 units of this part are as follows: Direct materials $ 90,000 Direct labor 130,000 Variable factory overhead 60,000 Fixed factory overhead 140,000 Total costs $420,000 Of the fixed factory overhead costs, $60,000 is avoidable. Cooper Company has offered to sell 10,000 units of the same part to Landry's Inc...

The accompany data shows the demand for one type of chip used in industrial equipment from...

The accompany data shows the demand for one type of chip used in industrial equipment from a small manufacturer. Month New Chip Introduced Demand 1 0 3894 2 0 3489 3 0 6083 4 1 10645 5 0 7697 6 0 7711 7 0 5427 8 0 8734 9 1 13048 10 0 7271 11 0 8614 12 0 7164 13 0 7401 14 0 9689 15 1 14506 16 0 8509 17 0 12159 18 0 14696 19 1...

Supler Corporation produces a part used in the manufacture of one of its products. The unit...

Supler Corporation produces a part used in the manufacture of one of its products. The unit product cost is $21, computed as follows: Direct materials $ 7 Direct labor 6 Variable manufacturing overhead 3 Fixed manufacturing overhead 5 Unit product cost $ 21 An outside supplier has offered to provide the annual requirement of 2,900 of the parts for only $13 each. The company estimates that 60% of the fixed manufacturing overhead cost above could be eliminated if the parts...

Wire electrical-discharge machining (WEDM) is a process used to manufacture conductive hard metal components. It uses...

Wire electrical-discharge machining (WEDM) is a process used to manufacture conductive hard metal components. It uses a continuously moving wire that serves as an electrode. Coating on the wire electrode allows for cooling of the wire electrode core and provides an improved cutting performance. An article gave the following sample observations on total coating layer thickness (in µm) of eight wire electrodes used for WEDM. 22 17 29 35 43 25 25 25 Calculate a 99% CI for the standard...