Question

In: Other

Two large containers A and B of the same size are filled with different fluids. The...

Two large containers A and B of the same size are filled with different fluids. The fluids in containers A and B are maintained at 0° C and 100° C, respectively. A small metal bar, whose initial temperature is 100° C, is lowered into container A. After 1 minute the temperature of the bar is 90° C. After 2 minutes (since being lowered into container A) the bar is removed and instantly transferred into the other container. After 1 minute in container B the temperature of the bar rises 10°. How long, measured from the start of the entire process, will it take the bar to reach 99.8° C? (Round your answer to two decimal places. Assume the final temperature being asked for is reached while the bar is container B.)

Solutions

Expert Solution

Amanda K answered 8 months ago
Next > < Previous

Related Solutions

Two large containers A and B of the same size are filled with different fluids. The...
Two large containers A and B of the same size are filled with different fluids. The fluids in containers A and B are maintained at 0° C and 100° C, respectively. A small metal bar, whose initial temperature is 100° C, is lowered into container A. After 1 minute the temperature of the bar is 90° C. After 2 minutes the bar is removed and instantly transferred to the other container. After 1 minute in container B, the temperature of...
Two large containers A and B of the same size are filled with different fluids. The...
Two large containers A and B of the same size are filled with different fluids. The fluids in containers A and B are maintained at 0° C and 100° C, respectively. A small metal bar, whose initial temperature is 100° C, is lowered into container A. After 1 minute the temperature of the bar is 90° C. After 2 minutes (since being lowered into container A) the bar is removed and instantly transferred into the other container. After 1 minute...
If the size and shape of two objects A & B are the same, but object...
If the size and shape of two objects A & B are the same, but object B has a smaller mass: (a) for which object would the beta factor be larger? Justify your answer. (b) Which object would have a larger terminal velocity? Justify your answer. (c) Using a-b: if you dropped styrofoam ball and a steel ball of the same size/shape off a tall building, which would land land first, discounting air resistance? How about including air resistance? beta=...
Two large tanks are connected by two pipes of different size in parallel. Water temperature is...
Two large tanks are connected by two pipes of different size in parallel. Water temperature is 20°C. The surface water elevation in the upstream reservoir (Reservoir I) is 175m. The length of each pipe is 1250 m, and other properties are specified in the following: Pipe A: diameter 0.5m, and frictional factor 0.025; Pipe B: diameter 0.25m, the frictional factor is not given, but relative roughness is 0.006 under the flow condition observed. Flow velocity in Pipe A is 2m/s....
Consider two containers A and B where A is a rigid container and B is a...
Consider two containers A and B where A is a rigid container and B is a container with a massless, frictionless piston that maintains constant pressure. NH3 (g) is injected into both containers and allowed to come to equilibrium. At equilibrium, 2 atm of Argon gas is injected into each container. Explain any changes (up, down or no change) to the equilibrium concentrations of NH3 , N2 and H2 ? a) do the partial pressures of container A change or...
Two stacks are the same if they have the same size and their elements at the...
Two stacks are the same if they have the same size and their elements at the corresponding positions are the same. Add the method equalStack to class ArrayStack that takes as a parameter ArrayStack object otherStack, and returns true if this stack is the same as otherStack. Use the following signature for your method: public boolean equalStack(ArrayStack otherStack) { ... }
Matoyo Ltd manufactures large metal waste containers. These containers are produced in two processing departments, Fabricating...
Matoyo Ltd manufactures large metal waste containers. These containers are produced in two processing departments, Fabricating and Painting. In both departments, all the direct materials are added at the beginning of the process, labour and overhead costs are applied evenly throughout the entire process. Matoyo uses process costing and had the following production and cost information for the Fabricating Department for the month of April. Units in work in process at 1 April, 60% complete                           10,000 Units started during April                                                                   65,000 Units...
Two containers of the same volume are evacuated. Container 1 is maintained at a temperature of...
Two containers of the same volume are evacuated. Container 1 is maintained at a temperature of 400 K and filled with oxygen gas to a pressure of 750 mm Hg. Container 2 is maintained at a temperature of 200 K and filled with hydrogen gas to a pressure of 750 mm Hg. Compare the two samples of gas quantitatively with regard to: a. Number of molecules b. Mass c. Average molecular kinetic energy d. Average molecular speed (rms)
1. a) How are two different substituents ordered? b) How are two of the same substituent...
1. a) How are two different substituents ordered? b) How are two of the same substituent named? (Does it have something to do with opposite sides of a parent chain?)
In sand casting, the volumetric size of the pattern is: (A) bigger than, (B) same size...
In sand casting, the volumetric size of the pattern is: (A) bigger than, (B) same size as, or (C) smaller than the cast part.
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT