Question

In: Accounting

Segmented Reporting and Variances Pittsburgh-Walsh Company (PWC) is a manufacturing company whose product line consists of...

Segmented Reporting and Variances

Pittsburgh-Walsh Company (PWC) is a manufacturing company whose product line consists of lighting fixtures and electronic timing devices. The Lighting Fixtures Division assembles units for the upscale and mid-range markets. The Electronic Timing Devices Division manufactures instrument panels that allow electronic systems to be activated and deactivated at scheduled times for both efficiency and safety purposes. Both divisions operate out of the same manufacturing facilities and share production equipment.

   PWC’s budget for the year ending December 31, 20x1, follows and was prepared on a business segment basis under the following guidelines:

  1. Variable expenses are directly assigned to the incurring division.
  2. Fixed overhead expenses are directly assigned to the incurring division.
  3. The production plan is for 8,000 upscale fixtures, 22,000 mid-range fixtures, and 20,000 electronic timing devices. Production equals sales.

   PWC established a bonus plan for division management that required meeting the budget’s planned operating income by product line, with a bonus increment if the division exceeds the planned product line operating income by 10 percent or more.

PWC Budget
For the Year Ending December 31, 20x1
(In Thousands of Dollars)
Lighting Fixtures
Upscale Mid-Range Electronic Timing
Devices
Total
Sales $1,440 $ 770 $ 800 $ 3,010
Variable expenses:
Cost of goods sold (720) (439) (320) (1,479)
Selling and administrative (170) (60) (60) (290)
Contribution margin $ 550 $ 271 $ 420 $ 1,241
Fixed overhead expenses 140 80 80 300
Segment margin $ 410 $ 191 $ 340 $ 941

   Shortly before the year began, the CEO, Jack Parkow, suffered a heart attack and retired. After reviewing the 20x1 budget, the new CEO, Joe Kelly, decided to close the lighting fixtures mid-range product line by the end of the first quarter and use the available production capacity to grow the remaining two product lines. The marketing staff advised that electronic timing devices could grow by 40 percent with increased direct sales support. Increases above that level and increasing sales of upscale lighting fixtures would require expanded advertising expenditures to increase consumer awareness of PWC as an electronics and upscale lighting fixtures company. Kelly approved the increased sales support and advertising expenditures to achieve the revised plan. Kelly advised the divisions that for bonus purposes the original product-line operating income objectives must be met, but he did allow the Lighting Fixtures Division to combine the operating income objectives for both product lines for bonus purposes.

   Prior to the close of the fiscal year, the division controllers were furnished with preliminary actual data for review and adjustment, as appropriate. These preliminary year-end data reflect the revised units of production amounting to 12,000 upscale fixtures, 4,000 mid-range fixtures, and 30,000 electronic timing devices and are presented as follows:

PWC Preliminary Actuals
For the Year Ending December 31, 20x1
(In Thousands of Dollars)
Lighting Fixtures
Upscale Mid-Range Electronic Timing
Devices
Total
Sales $ 2,160 $140 $1,200 $ 3,500
Variable expenses:
Cost of goods sold (1,080) (80) (480) (1,640)
Selling and administrative (260) (11) (96) (367)
Contribution margin $ 820 $ 49 $ 624 $ 1,493
Fixed overhead expenses 140 14 80 234
Segment margin $ 680 $ 35 $ 544 $ 1,259

   The controller of the Lighting Fixtures Division, anticipating a similar bonus plan for 20x2, is contemplating deferring some revenues to the next year on the pretext that the sales are not yet final and accruing in the current year expenditures that will be applicable to the first quarter of 20x2. The corporation would meet its annual plan, and the division would exceed the 10 percent incremental bonus plateau in 20x1 despite the deferred revenues and accrued expenses contemplated.

Required:

1. Select one benefits that an organization realizes from segment reporting. Evaluate segment reporting on a variable-costing basis versus an absorption-costing basis.
It highlights the profitability of each segment

2. Calculate the contribution margin, contribution margin volume, and sales mix variances. Enter your answers in dollars, rather than in thousands of dollars For example, enter "750,000" rather than "750". If required, round calculations to the nearest cent.

Contribution margin variance $ Favorable
Contribution margin volume variance $ Unfavorable
Sales mix variance $ Favorable

Solutions

Expert Solution

ANSWER

Part 2)

The contribution margin variance is determined as below:

Contribution Margin Variance = Total Contribution Margin (Actual) - Total Contribution Margin (Budget)

Substituting values in the above formula, we get,

Contribution Margin Variance = 1,493,000 - 1,241,000 = $252,000 (Favorable)

_____

The contribution margin volume variance is arrived as follows:

Contribution Margin Volume Variance = Budgeted Average Contribution Per Unit*(Actual Units Sold - Budgeted Unit Sales)

Here, Actual Units Sold = 12,000 + 4,000 + 16,000 = 46,000, Budgeted Unit Sales = 8,000 + 22,000 + 20,000 = 50,000 and Budgeted Average Contribution Per Unit = 1,241,000/50,000 = $24.82

Substituting these values in the above formula, we get,

Contribution Margin Volume Variance = 24.82*(46,000 - 50,000) = $99,280 (Unfavorable)

_____

The sales mix variance is calculated as below:

Sales Mix Variance = (Actual Units Sold for Upscale Fixtures - Budgeted Units Sold for Upscale Fixtures)*(Budgeted Contribution Per Unit for Upscale Fixtures - Budgeted Average Contribution Per Unit) +  (Actual Units Sold for Mi-Range Fixtures - Budgeted Units Sold for Mid-Range Fixtures)*(Budgeted Contribution Per Unit for Mid-Range Fixtures - Budgeted Average Contribution Per Unit) +  (Actual Units Sold for Electronic Timing Devices - Budgeted Units Sold for Electronic Timing Devices)*(Budgeted Contribution Per Unit for Electronic Timing Devices - Budgeted Average Contribution Per Unit)

Substituting values in the above formula, we get,

Sales Mix Variance = (12,000 - 8,000)*(550,000/8,000 - 24.82) + (4,000 - 22,000)*(271,000/22,000 - 24.82) + (30,000 - 20,000)*(420,000/20,000 - 24.82) = $362,520 (Favorable)

_____

Tabular Representation:

Contribution margin variance $252,000 Favorable
Contribution margin volume variance $99,280 Unfavorable
Sales mix variance $362,520 Favorable

_____________________________________________

If you have any query or any Explanation please ask me in the comment box, i am here to helps you.please give me positive rating.

*****************THANK YOU**************


Related Solutions

Segmented Reporting and Variances Pittsburgh-Walsh Company (PWC) is a manufacturing company whose product line consists of...
Segmented Reporting and Variances Pittsburgh-Walsh Company (PWC) is a manufacturing company whose product line consists of lighting fixtures and electronic timing devices. The Lighting Fixtures Division assembles units for the upscale and mid-range markets. The Electronic Timing Devices Division manufactures instrument panels that allow electronic systems to be activated and deactivated at scheduled times for both efficiency and safety purposes. Both divisions operate out of the same manufacturing facilities and share production equipment.    PWC’s budget for the year ending December...
Segmented Reporting and Variances Pittsburgh-Walsh Company (PWC) is a manufacturing company whose product line consists of...
Segmented Reporting and Variances Pittsburgh-Walsh Company (PWC) is a manufacturing company whose product line consists of lighting fixtures and electronic timing devices. The Lighting Fixtures Division assembles units for the upscale and mid-range markets. The Electronic Timing Devices Division manufactures instrument panels that allow electronic systems to be activated and deactivated at scheduled times for both efficiency and safety purposes. Both divisions operate out of the same manufacturing facilities and share production equipment.    PWC’s budget for the year ending December...
Segmented Reporting and Variances Pittsburgh-Walsh Company (PWC) is a manufacturing company whose product line consists of...
Segmented Reporting and Variances Pittsburgh-Walsh Company (PWC) is a manufacturing company whose product line consists of lighting fixtures and electronic timing devices. The Lighting Fixtures Division assembles units for the upscale and mid-range markets. The Electronic Timing Devices Division manufactures instrument panels that allow electronic systems to be activated and deactivated at scheduled times for both efficiency and safety purposes. Both divisions operate out of the same manufacturing facilities and share production equipment.    PWC’s budget for the year ending December...
A local manufacturing company builds two products on the same production line that consists of seven...
A local manufacturing company builds two products on the same production line that consists of seven workstations. The times in hours and process stations are listed below. Process 1 Process 2 Process 3 Process 4 Process 5 Process 6 Process 7 Product A 0.25 1.75 1.0 1.5 1.5 2.75 0.25 Product B 0.25 0.75 0.5 1.5 0.5 0.75 0.25 The standard times for Product A is 9.0 hours and Product B is 4.5 hours. The company averages 22 units of...
You are the industrial ecologist for a manufacturing company whose leading product is cables for personal...
You are the industrial ecologist for a manufacturing company whose leading product is cables for personal computers. The principal components of the cable are copper wire, flexible plastic wire coating, and rigid plastic connectors. What by-product or residue streams do you anticipate? About which should you be most concerned?
Segmented Income Statements, Product-Line Analysis Alard Company produces blenders and coffee makers. During the past year,...
Segmented Income Statements, Product-Line Analysis Alard Company produces blenders and coffee makers. During the past year, the company produced and sold 65,000 blenders and 75,000 coffee makers. Fixed costs for Alard totaled $340,000, of which $184,000 can be avoided if the blenders are not produced and $142,500 can be avoided if the coffee makers are not produced. Revenue and variable cost information follows: Blenders Coffee Makers Selling price per appliance $24 $29 Variable expenses per appliance 18 27 Required: 1....
Question 1 SEGMENTED INCOME STATEMENTS, PRODUCT-LINE ANALYSIS (LO2) Walker Company produces blenders and coffeemakers. During the...
Question 1 SEGMENTED INCOME STATEMENTS, PRODUCT-LINE ANALYSIS (LO2) Walker Company produces blenders and coffeemakers. During the past year, the company produced and sold 100,000 blenders and 25,000 coffeemakers. Fixed costs for Walker totalled $250,000, of which $90,000 can be avoided if the blenders are not produced and $45,000 can be avoided if the coffee makers are not produced. Revenue and variable cost information follow: Blenders       Coffeemakers Variable expenses per appliance $20               $43 Selling price per appliance           22             ...
Kipley Company is a small manufacturing firm located in Pittsburgh, Pennsylvania. The company has a workforce...
Kipley Company is a small manufacturing firm located in Pittsburgh, Pennsylvania. The company has a workforce of both hourly and salaried employees. Each employee is paid for hours actually worked during each week, with the time worked being recorded in quarter-hour increments. The standard workweek consists of 40 hours, with all employees being paid time and one-half for any hours worked beyond the 40 regular hours. Wages are paid every Friday, with one week’s pay being held back by the...
Kipley Company is a small manufacturing firm located in Pittsburgh, Pennsylvania. The company has a workforce...
Kipley Company is a small manufacturing firm located in Pittsburgh, Pennsylvania. The company has a workforce of both hourly and salaried employees. Each employee is paid for hours actually worked during each week, with the time worked being recorded in quarter-hour increments. The standard workweek consists of 40 hours, with all employees being paid time and one-half for any hours worked beyond the 40 regular hours. Wages are paid every Friday, with one week's pay being held back by the...
Four Finger Appliance Company manufactures small kitchen appliances. The product line consists of blenders and toaster...
Four Finger Appliance Company manufactures small kitchen appliances. The product line consists of blenders and toaster ovens. Four Finger Appliance presently uses the multiple production department factory overhead rate method. The factory overhead is as follows: 1 Assembly Department $186,000.00 2 Test and Pack Department 120,000.00 3 Total $306,000.00 The direct labor information for the production of 7,500 units of each product is as follows: Department Assembly Test and Pack Blender 750 dlh 2,250 dlh Toaster oven 2,250 750 Total...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT