Question

In: Physics

Agent Arlene devised the following method of measuring the muzzlevelocity of a rifle (the figure...

Agent Arlene devised the following method of measuring the muzzle velocity of a rifle (the figure below). She fires a bullet into a 4.293-kwooden block resting on a smooth surface, and attached to a spring of spring constant k = 162.8N/m. The bullet, whose mass is 7.870 g, remains embedded in the wooden block. She measures the maximum distance that the block compresses the spring to be 9.460cm.

Agent Arlene devised the following method of measu

What is the speed v of the bullet?


Solutions

Expert Solution

Concepts and reason

The concept required to solve the problem are elastic collision and conservation of total momentum and the total energy of the spring-mass system. 

Initially, calculate the maximum velocity of the spring-mass oscillating system using conservation of momentum and finally calculate the speed of bullet before collision using conservation of energy.

Fundamentals

The collision in which both linear momentum and kinetic energy were conserved is known as elastic collision.

Assume two objects of masses m1{m_1} moving with initial velocity u1{u_1} and mass m2{m_2} moving with initial velocity u2{u_2} collide with each other and then move with final velocities v1{v_1} and v2{v_2} respectively. Then, the expression for conservation of momentum is given as follows:

m1u1+m2u2=m1v1+m2v2{m_1}{u_1} + {m_2}{u_2} = {m_1}{v_1} + {m_2}{v_2}

And conservation of kinetic energy is given by following expression.

12m1u12+12m2u22=12m1v12+12m2v22\frac{1}{2}{m_1}{u_1}^2 + \frac{1}{2}{m_2}{u_2}^2 = \frac{1}{2}{m_1}{v_1}^2 + \frac{1}{2}{m_2}{v_2}^2

The potential energy PEspringP{E_{spring}} stored in a spring when it stretched by a distance x is given by following expression.

PEspring=12kx2P{E_{{\rm{spring}}}} = \frac{1}{2}k{x^2}

The momentum that combined after collision is stored in the spring when it is fully compressed is,

Pbefore=Pafter{P_{{\rm{before}}}} = {P_{{\rm{after}}}}

Here,  Pbefore{P_{{\rm{before}}}}  is the momentum before compressed and  Pafter{P_{{\rm{after}}}}  is the momentum after compression.

Substitute, mv0m{v_0} for Pbefore{P_{before}} and (m+M)vmax\left( {m + M} \right){v_{\max }} for Pafter{P_{after}} .

Here,  v0{v_0} is the speed of the bullet, vmax{v_{\max }}  is the maximum speed of the oscillating system,  mm is the mass of the bullet, and  MM is the mass of the wooden block.

mv0=(m+M)vmaxm{v_0} = \left( {m + M} \right){v_{\max }}

Rearrange the equation for vmax{v_{\max }} .

vmax=m(m+M)v0{v_{\max }} = \frac{m}{{\left( {m + M} \right)}}{v_0}

The potential energy stored in the spring is,

PEspring=12kx2P{E_{{\rm{spring}}}} = \frac{1}{2}k{x^2}

Here, k is the spring constant, and x is the displacement in the spring.

This energy must come from the kinetic energy of the block, so elastic potential energy is equal to the kinetic energy of the bullet block system.

Equation for kinetic energy of the block-bullet system is,

KE=12(m+M)vmax2KE = \frac{1}{2}\left( {m + M} \right){v_{\max }}^2

Here,  vmax{v_{\max }}  is the maximum speed of the oscillating system,  m+Mm + M is the mass of the oscillating system ( mm is the mass of the bullet, and  MM is the mass of the wooden block).

From the law of conservation of energy,

12(m+M)vmax2=12kA2\frac{1}{2}\left( {m + M} \right){v_{\max }}^2 = \frac{1}{2}k{A^2}

Here,  AA  is the amplitude,  mm  is the mass of the body, and  kk is the spring constant.

Substitute vmax=m(m+M)v0{v_{\max }} = \frac{m}{{\left( {m + M} \right)}}{v_0} in the above equation.

12(m+M)(m(m+M)v0)2=12kA2\frac{1}{2}\left( {m + M} \right){\left( {\frac{m}{{\left( {m + M} \right)}}{v_0}} \right)^2} = \frac{1}{2}k{A^2}

Rewrite the equation for v0{v_0} ,

v0=Amk(m+M){v_0} = \frac{A}{m}\sqrt {k\left( {m + M} \right)}

Convert the units of amplitude from cm to meter as follows:

A=9.460cm(1m100cm)=9.460×102m\begin{array}{c}\\A = 9.460\,{\rm{cm}}\left( {\frac{{1\;{\rm{m}}}}{{100\,{\rm{cm}}}}} \right)\\\\ = 9.460 \times {10^{ - 2}}\,{\rm{m}}\\\end{array}

Convert the units of mass of the bullet from g to kg as follows:

m=7.87g(1kg1000g)=7.87×103kg\begin{array}{c}\\{\rm{ }}m = 7.87{\rm{ g}}\left( {\frac{{1\,{\rm{kg}}}}{{1000\;{\rm{g}}}}} \right)\\\\ = 7.87 \times {10^{ - 3}}\,{\rm{kg}}\\\end{array}

Substitute, 9.460×102m9.460 \times {10^{ - 2}}{\rm{ m}} for AA , 7.87×103kg7.87 \times {10^{ - 3}}{\rm{kg}} for mm , 162.8N/m162.8{\rm{ N/m}} for kk and 4.293kg4.293{\rm{ kg}} for MM .

v0=9.460×102m7.87×103kg162.8N/m(7.87×103kg+4.293kg)=318.06m/s\begin{array}{c}\\{v_0} = \frac{{9.460 \times {{10}^{ - 2}}{\rm{ m}}}}{{7.87 \times {{10}^{ - 3}}{\rm{ kg}}}}\sqrt {162.8{\rm{ N/m}}\left( {7.87 \times {{10}^{ - 3}}{\rm{ kg}} + 4.293{\rm{ kg}}} \right)} \\\\ = 318.06{\rm{ m/s}}\\\end{array}

Therefore, the speed of the bullet is 318m/s.318{\rm{ m/s}}{\rm{.}}

Ans:

The speed of the bullet is 318m/s318{\rm{ m/s}} .


Related Solutions

Agent Arlene devised the following method of measuring the muzzle velocity of a rifle (the figure...
Agent Arlene devised the following method of measuring the muzzle velocity of a rifle (the figure below). She fires a bullet into a 4.114-kg wooden block resting on a smooth surface, and attached to a spring of spring constant k = 164.2 N/m . The bullet, whose mass is 7.870 g, remains embedded in the wooden block. She measures the maximum distance that the block compresses the spring to be 9.460 cm . What is the speed v of the...
Method for measuring Dip & Strike
Method for measuring Dip & Strike
The figure shows a simple device for measuring your reaction time. It consists of a cardboard...
The figure shows a simple device for measuring your reaction time. It consists of a cardboard strip marked with a scale and two large dots. A friend holds the strip vertically, with thumb and forefinger at the dot on the right in the figure. You then position your thumb and forefinger at the other dot (on the left in the figure), being careful not to touch the strip. Your friend releases the strip, and you try to pinch it as...
1. Match the method of measuring competitive advantage with the disadvantage of that method. Accounting profitability               ...
1. Match the method of measuring competitive advantage with the disadvantage of that method. Accounting profitability                A. Based on factors other than firm performance Shareholder value creation         B. Based on historic data. A economic value creation C. Based on the value of goods to the consumer. 2. Who are stakeholders from a strategic management perspective? Anyone that has an equity stake in the firm. Anyone that can materially affect the firm. Anyone that cares about the firm. Anyone for whom...
One method of measuring the mass of a virus particle is to use a laser to...
One method of measuring the mass of a virus particle is to use a laser to measure the oscillation frequency on a thin silicon wafer that is 28nm long. Then you put a virus on the silicone wafer and measure the frequency again. We do not need to delve into how the actual the device looks like we can use the model of a mass of a spring to describe the physical process. The following data comes from an experiment,...
Describe the method of measuring the benefits of cultural facilities based on the Hedonic model and...
Describe the method of measuring the benefits of cultural facilities based on the Hedonic model and the virtual value method.
One method for measuring the alcohol content of a liquid is to titrate the ethanol (C2H5OH)...
One method for measuring the alcohol content of a liquid is to titrate the ethanol (C2H5OH) with chromate (CrO4^2-). These reagents react to become Co2 and Cr^+3 respectively. Write the balanced equation for this redoc process under acidic conditions. If a 1.86g sample of an alcoholic beverage is titrated with 25.93 mL of 0.250 M sodium chromate, what is the percent by mass of alcohol in this beverage?
Discuss the methods of measuring poverty. Describe the advantages and disadvantages of each method.
Discuss the methods of measuring poverty. Describe the advantages and disadvantages of each method.
An early method of measuring the speed of light makes use of a rotating slotted wheel....
An early method of measuring the speed of light makes use of a rotating slotted wheel. A beam of light passes through a slot at the outside edge of the wheel, as in the figure, travels to a distant mirror, and returns to the wheel just in time to pass through the next slot in the wheel. One such slotted wheel has a radius of 8.8 cm and 100 slots at its edge. Measurements taken when the mirror is L...
What is "the welfare triangle" method of measuring the welfare costs of monopolies and tariffs? Why...
What is "the welfare triangle" method of measuring the welfare costs of monopolies and tariffs? Why does Tullock say that this method underestimates the welfare costs of tariffs and monopolies (and what are the costs that are not measured in the welfare triangle method)?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT