Address the following questions related to heat exchanger effectiveness. Recall that the maximum heat transfer possible...

Address the following questions related to heat exchanger effectiveness. Recall that the maximum heat transfer possible is the product of the minimum heat capacity (mass flow rate times specific heat) times the difference between the hot and cold side inlet temperatures. a. sketch the temperature profiles for a 50% and 80% effectiveness heat exchanger. make sure you have the correct shape which includes the degree of steepness at each end. b. What is the effectiveness for a heat exchanger with the following characteristics: the hot side is water entering at 160F and 21Ib/s, and the cold side is air entering at 20F and 4Ib/s. the heat exchanger has been designed to achieve an air outlet of 110F.

Expert Solution

samet mamat answered 2 years ago

HEAT TRANSFER: HEAT EXCHANGER Oil flows in a heat exchanger with a mass flow rate of...

HEAT TRANSFER: HEAT EXCHANGER Oil flows in a heat exchanger with a mass flow rate of 20 kg/s and is to be cooled from 175 to 65°C with water as a coolant flowing at a rate of 30 kg/s and an inlet temperature of 12°C. The overall heat transfer coefficient is U = 1250 W/m2⋅K. a) Sketch the temperature profile and calculate the mean temperature for parallel flow, counter flow, and cross flow heat exchangers.. b) Determine the area required...

Heat transfer In a test in a double tube heat exchanger the following data are obtained...

Heat transfer In a test in a double tube heat exchanger the following data are obtained For hot fluid Flow = 11.6 gal / sec Outlet temperature = 30.1 ° C Inlet temperature = 32 ° C For cold fluid Flow 11gal / min Outlet temperature 25.1 ° C Inlet temperature 24.2 ° C For the fluid consider k = 0.49 w / mK cp = 3729.95 J / kgK Prandtl number = 14.29 Density = 1035.02kg / m3 Get:...

Heat transfer in a test in a double tube heat exchanger the following data are obtained...

Heat transfer in a test in a double tube heat exchanger the following data are obtained For hot fluid Flow = 11.6 gal / sec Outlet temperature = 30.1 ° C Inlet temperature = 32 ° C For cold fluid Flow 11gal / min Outlet temperature 25.1 ° C Inlet temperature 24.2 ° C For the fluid consider k = 0.49 w / mK cp = 3729.95 J / kgK Prandtl number = 14.29 Density = 1035.02kg / m3 Get:...

A heat exchanger is used to transfer heat from a steam stream to a chlorine gas...

A heat exchanger is used to transfer heat from a steam stream to a chlorine gas stream. 100 kg of steam at 1 bar and 250°C enters the heat exchanger and leaves the exchanger as saturated steam at 1 bar. Chlorine gas enters the exchanger at 1 bar and 33.0°C and leaves the exchanger at 132.0°C. Assume the heat exchanger is adiabatic. A)What is the specific enthalpy of the inlet steam stream? (Use liquid water at 0.01°C as a reference...

What is the therotiacal And The expertmatla heat transfer cofficnent for heat exchanger in my case...

What is the therotiacal And The expertmatla heat transfer cofficnent for heat exchanger in my case shell and tube Therotical ? formual ?? expermantial ? formula ? I am uisng LMTD method

Determine the overall heat transfer coefficient (U) in a heat exchanger that uses steam to heat water to the point of vaporization (in vacuum.)

Determine the overall heat transfer coefficient (U) in a heat exchanger that uses steam to heat water to the point of vaporization (in vacuum.) The system is non-insulated, so the heat lost to the surroundings must be taken into consideration. While I know that the heat Q = mCdT and the heat transfer rate q = UAdT(Log-mean), I am struggling to equate the two due to the heat lost to the surroundings. How do I go about determining the overall...

Subject: Heat exchanger Lab Question: 1.1) in heat exchanger analysis, the following quantities are used. Explain...

Subject: Heat exchanger Lab Question: 1.1) in heat exchanger analysis, the following quantities are used. Explain what each means and give a formula for each. Assume the mass flow rates, fluid properties, inlet, temperatures, and length and diameters of the heat exchanger are known. a) Overall heat transfer coefficient. UA. b) A number of transfer units, NTU. c) Effectiveness, e 1.2) what is the hydraulic diameter and why is it useful for double-pipe heat exchanger analysis?

For the following case study address the questions in details (no bullets) Mattel’s Recall Strategy –...

For the following case study address the questions in details (no bullets) Mattel’s Recall Strategy – post mortem. What are the positives and negatives of Mattel’s recall strategy? Who are Mattel’s Stakeholders? Name the different groups that were impacted. Who did Mattel cater to in the recall? Why? Do you agree? What values did Mattel exhibit during the recall? How did they affect Mattel? How did it affect the global supply chain? What did Mattel do at the time and...

Describe how to improve the efficiency of a room related to heat loss. Heat transfer can...

Describe how to improve the efficiency of a room related to heat loss. Heat transfer can occur through conduction, radiation, and convection.

Heat transfer ( related nuclear engineering a little bit ) I got some Short-answer questions (2~3...

Heat transfer ( related nuclear engineering a little bit ) I got some Short-answer questions (2~3 sentences) I want to know that 1) Definition of convective heat transfer coefficient 2) Frequency range of radiation heat transfer 3) Constant temperature condition VS constant heat flux 4) Coupling of equations in natural convection 5) Core acceleration

Question