If the flow rate of soil waste is 205 GPM, what size drainpipe will be needed...

If the flow rate of soil waste is 205 GPM, what size drainpipe will be needed for:

a. A slope of 1/2 inch per foot of fall? What is the flow rate of the drainpipe selected?

b. A slope of 1 ∕8 inch per foot of fall? What is the flow rate of the drainpipe selected?

Solutions

Expert Solution

Ally Wells answered 10 months ago

Next > < Previous

Related Solutions

The water flow rate for a particular sprinkler is 19 gpm. The water must be projected...

The water flow rate for a particular sprinkler is 19 gpm. The water must be projected at least 24 feet in radius. The sprinkler is mounted 11 feet above the ground and is aimed at an angle of 26 degrees above the horiztonal. With what velocity must the water leave the sprinkler? What diameter (inches) should the opening be to achieve this velocity? Water Velocity =_______ ft/s Diameter Opening = ______ inches

The water flow rate for a particular sprinkler is 16 gpm. The water must be projected...

The water flow rate for a particular sprinkler is 16 gpm. The water must be projected at least 25 feet in radius. The sprinkler is mounted 11 feet above the ground and is aimed at an angle of 29 degrees above the horiztonal. With what velocity must the water leave the sprinkler? What diameter (inches) should the opening be to achieve this velocity?

The water flow rate for a particular sprinkler is 18 gpm. The water must be projected...

The water flow rate for a particular sprinkler is 18 gpm. The water must be projected at least 22 feet in radius. The sprinkler is mounted 10 feet above the ground and is aimed at an angle of 29 degrees above the horiztonal. With what velocity must the water leave the sprinkler? What diameter (inches) should the opening be to achieve this velocity? Water Velocity = ft/s Diameter Opening = inches

Using the flow rate of 250 gpm, select a plastic pipe diameter (2”, 4”, 6”, 8”,...

Using the flow rate of 250 gpm, select a plastic pipe diameter (2”, 4”, 6”, 8”, 10”…) & determine the approximate pump head based on the following: Minor pipe losses include 6-90 degree bends (standard) and one plug valve straightway. Document your source for your K-values. Document which calculation method you used to calculate the total pump head. To save energy, choose the largest pipe diameter that provides the recommended 2.0 fps velocity of flow. Assume nominal pipe diameters as...

1. Explain the basic treatment categories for hazardous waste. 2. Determine the compacted waste to soil...

1. Explain the basic treatment categories for hazardous waste. 2. Determine the compacted waste to soil ratio (by volume) for an assumed compacted waste density of 500 kg/m3. The design disposal rate is 60 tons per day. The cell height and width will be 3.0 m and 5.0 m respectively. Take the slope of working faces as 3 horizontal to 1 vertical. The prescribed daily soil cover thickness is to be 200 mm. 3. It is mandatory that a civil...

What are the new types of novelty materials are needed for innovating the materials for waste...

What are the new types of novelty materials are needed for innovating the materials for waste to energy and water distribution efficiency to reduce climate change? Write a 600 words on these materials and new materials implemetation and issues.

What sample size is needed if a ±1.5 lbs. margin of error is needed for computing...

What sample size is needed if a ±1.5 lbs. margin of error is needed for computing the 95% confidence interval of the mean weight of U.S. adult males? Assume a population standard deviation of 12 lbs. 9. Find the 99% confidence interval for the mean number of times people blink per hour (bph), given that a sample of 60 people had a mean rate of 1230 bph. Assume a population standard deviation of 200 bph.

How shape and size of soil particles influence the properties of soil? Justify your answer with...

How shape and size of soil particles influence the properties of soil? Justify your answer with appropriate examples. (Mention minimum two properties and corresponding justifications)

Determine the size of the high rate trickling filter for the following data: Sewage flow is...

Determine the size of the high rate trickling filter for the following data: Sewage flow is 5 MLD; Recirculation factor is 1.89; Raw wastewater BOD is 230 mg/L; BOD removed in PST is 30%; Final desired BOD in the treated effluent is 25 mg/L pls send the sol fast in rough only i need it urgent

a.) What sample size is needed to give a margin of error within +-6 in estimating...

a.) What sample size is needed to give a margin of error within +-6 in estimating a population mean with 95% confidence, assuming a previous sample had s=20. Round your answer up to the nearest integer. sample size = b.) What sample size is needed to give a margin of error within +-13 in estimating a population mean with 99% confidence, assuming a previous sample had s=116 Round your answer up to the nearest integer. sample size = c.) In...

Subjects