Determine the rate of convection heat loss from both the top and the bottom of a...

Determine the rate of convection heat loss from both the top and the bottom of a flat plate at Ts = 80°C with air in parallel flow at T? = 25°C, u? = 3 m/s. The plate is t = 1 mm thick, L = 25 mm long, and w = 50 mm deep. Neglect the heat loss from the edges of the plate. Compare the rate of convection heat loss from the plate to the rate of convection heat loss from an Lc = 50mmlong cylinder of the same volume as that of the plate. The convective conditions associated with the cylinder are the same as those associated with the plate.

ANSWER: 5.84 W, 3.73 W

Solutions

Expert Solution

samet mamat answered 2 years ago

Next > < Previous

Related Solutions

Estimate the heat loss rate from a person who can be approximated as a cylinder of...

Estimate the heat loss rate from a person who can be approximated as a cylinder of diameter 0.3 m and height 1.8 m. The (clothing) surface temperature is 23 °C and the cross wind flow velocity is 15 m/s. The ambient temperature is –23 °C. Neglect end effects from the cylinder. Assume steady state.

Match the types of heat transfer to the example. Natural Convection Forced Convection Conduction Radiation A....

Match the types of heat transfer to the example. Natural Convection Forced Convection Conduction Radiation A. You burn your hand touching a hot pot in the kitchen. B. Frost forming during a cold clear night, with an outdoor temperature of 2 degrees Celsius. C. Cold wind blowing on your face. D. Water heating up in a pot on a stove top.

Hi all Referring to the formula for heat energy loss through convection: dQ/dt=hA(Tw-Tair) q=hcAdT q= heat...

Hi all Referring to the formula for heat energy loss through convection: dQ/dt=h*A*(Tw-Tair) q=hc*A*dT q= heat transfer per unit time W (energy/time) (E=W*t) h= convective heat transfer coefficient of the process W/m² °C A= heat transfer area of the surface dT= temperature difference between surface Tw and the bulk fluid Tair , °C (bulk fluid is the surrounding medium eg. air) What is the correct value of h, thermal constant for air to use? these figures vary widely.

Lowest heat transfer coeffient is for ? A) Boiling B) Free Convection C) Forced Convection D)...

Lowest heat transfer coeffient is for ? A) Boiling B) Free Convection C) Forced Convection D) Condensation And why ? and what is the second lowest

Estimate the top heat loss coefﬁcient of a collector that has the following speciﬁcations: Collector area=...

Estimate the top heat loss coefﬁcient of a collector that has the following speciﬁcations: Collector area= 2m2 Collector slope =35⁰ Number of glass covers = 3 Thickness of each glass cover =4 mm. Thickness of absorbing plate =0.5 mm. Space between glass covers = 20 mm. Space between inner glass cover and absorber =40 mm. Mean absorber temperature, Tp =80 ⁰C Ambient air temperature =15 ⁰C Absorber plate emissivity, εp =0.10. Glass emissivity, εg =0.88 Wind velocity = 2.5m/s. Assuming...

i need matlab code of heat equation in 1D with convection ?

Why do ventricles need to squeeze from the bottom of the muscle to the top of...

Why do ventricles need to squeeze from the bottom of the muscle to the top of the muscle? A. To ensure that ALL of the blood makes it from the ventricles into the pulmonary artery and aorta B. This is simply how the electrical fibers are aligned. It has no greater use. C. To ensure that ALL of the blood makes it from the ventricles into the left and right atrium What problem would arise if topoisomerase was removed from...

Question